Operation Manual

Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Feature Tables (HL-L8360CDW/HL-L9310CDW)
Feature Tables (HL-L8360CDW/HL-L9310CDW)
Related Models: HL-L8360CDW/HL-L9310CDW
(Toner)
Level 2 Level 3 Level 4 Descriptions
(Toner)
Toner Life
- View the approximate remaining toner life for each colour.
Test Print
- Print the test page.
Calibration Calibrate
Initiate colour calibration to check and correct colours.
Reset
Reset the calibration parameters to the default settings.
Registration
- Align the print position of each colour.
(Wi-Fi Setup)
Level 2
Level 3 Descriptions
(Wi-Fi Setup)
TCP/IP
1
Change the TCP/IP settings.
Setup Wizard
Configure the wireless network settings using the setup wizard.
WLAN Assistant
Configure your wireless network settings using the Brother installation
disc.
WPS
Configure your wireless network settings using the one-button push
method.
WPS w/ PIN Code
1
Configure the wireless network settings using WPS with a PIN code.
WLAN Status
1
Display the wireless network connection status.
MAC Address
1
Display the MAC address of the machine.
Set to Default
1
Restore wireless network settings of your machine to the factory settings.
WLAN Enable
1
Turn the wireless interface on or off.
1
(Available after the Wi-Fi
®
is set up)
[Web]
Level 3
Descriptions
Web
Connect the Brother machine to an Internet service.
Web services may have been added and service names may have been changed by the provider since this
document was published.
375