User Manual
Table Of Contents
- User’s Guide HL-L9200CDWT/HL-L9300CDWTT
- For HL-L9300CDWTT users
- User's Guides and where do I find them?
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Table of Contents
- 1 Printing Methods
- About this Machine
- Acceptable paper and other print media
- Loading paper
- 2-sided printing
- Printing from a USB flash drive or digital camera supporting mass storage
- 2 Driver and Software
- Printer driver
- Windows®
- Macintosh
- Software
- 3 General Information
- 4 Options
- 5 Routine Maintenance
- 6 Troubleshooting
- A Appendix
- Index
General Information
103
3
Level 1 Level 2 Description
Reset Menu Network Restores all network settings of the internal print server to the factory
settings.
Factory Reset This operation resets all the machine's setting back to the defaults set
at the factory. Brother strongly recommends you perform this operation
when you dispose of the machine.
The factory settings are shown in Bold with an asterisk.
Level 1 Level 2 Level 3 Options Descriptions
Color Correction Calibration Calibrate Yes / No Performs a calibration to check and
correct the colours.
Reset Yes / No Set the calibration parameters back to the
default settings.
Registration - Yes / No Aligns the print position of each colour.
Auto Correction - On* / Off Sets the machine to perform Colour
Calibration and Registration
automatically.
The factory settings are shown in Bold with an asterisk.