User Manual

Printing Methods
3
1
1
Folio size is 215.9 mm x 330.2 mm.
2
Load only one sheet of Glossy in the MP tray.
3
Standard equipment.
Recommended paper specifications 1
The following paper specifications are appropriate for this machine:
 Use plain paper that is appropriate for laser machines to make copies.
 Use paper that is 75 to 90 g/m
2
.
 Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
 This machine can use recycled paper that meets DIN 19309 specifications.
(Before you load paper in this machine, see Important information for choosing your paper on page 212.)
Paper Tray Capacity
Paper size Paper types No. of sheets
Paper Tray
(Tray 1)
A4, Letter, Legal, B5 (JIS),
Executive, A5,
A5 (Long Edge), A6, Folio
1
Plain paper, Thin paper and
Recycled paper
up to 250 sheets
80 g/m
2
Multi-purpose Tray
(MP Tray)
Width:
76.2 to 215.9 mm
Length:
127 to 355.6 mm
Plain paper, Thin paper,
Thick paper, Thicker paper,
Recycled paper, Bond paper,
Labels, Envelopes, Env. Thin,
Env.Thick and Glossy paper
2
up to 50 sheets
80 g/m
2
3 Envelopes
1 Glossy paper
Optional Lower Tray
(Tray 2)
3
A4, Letter, Legal, B5(JIS),
Executive, A5, Folio
1
Plain paper, Thin paper and
Recycled paper
up to 500 sheets
80 g/m
2
Basis weight
75-90 g/m
2
Thickness 80-110 m
Roughness Higher than 20 sec.
Stiffness
90-150 cm
3
/100
Grain direction Long grain
Volume resistivity
10e
9
-10e
11
ohm
Surface resistivity
10e
9
-10e
12
ohm-cm
Filler
CaCO
3
(Neutral)
Ash content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%