User Manual
Table Of Contents
- User’s Guide HL-L9200CDWT/HL-L9300CDWTT
- For HL-L9300CDWTT users
- User's Guides and where do I find them?
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Table of Contents
- 1 Printing Methods
- About this Machine
- Acceptable paper and other print media
- Loading paper
- 2-sided printing
- Printing from a USB flash drive or digital camera supporting mass storage
- 2 Driver and Software
- Printer driver
- Windows®
- Macintosh
- Software
- 3 General Information
- 4 Options
- 5 Routine Maintenance
- 6 Troubleshooting
- A Appendix
- Index
General Information
116
3
Colour Correction 3
The output density and print position for each colour may vary depending on the machine's environment, such
as temperature and humidity.
Colour Calibration 3
Calibration helps you improve the colour density.
NOTE
• If you are using the Windows
®
printer driver, the driver will get the calibration data automatically if both
the Use Calibration Data and Get Device Data Automatically check boxes are selected. The default
settings are On. See Colour Calibration on page 48.
• If you are using the Macintosh printer driver, you must perform the calibration using the Status Monitor.
Turn on the Status Monitor, and then select Color Calibration from the Control menu. See Status Monitor
on page 82 for how to turn on the Status Monitor.
Calibrate
a Press
b Press Calibration > Calibrate.
c Press Yes to confirm.
d The Touchscreen displays Completed.
e Press .
Reset
Reset the calibration parameters back to those set at the factory.
a Press
b Press Calibration > Reset.
c Press Yes to confirm.
d The Touchscreen displays Completed.
e Press .