User Manual
Table Of Contents
- User’s Guide HL-L9200CDW/HL-L9200CDWT/HL-L9300CDW/HL-L9300CDWT/HL-L9300CDWTT
- HL-L9300 series only
- User's Guides and where do I find them?
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Table of Contents
- 1 Printing Methods
- About this Machine
- Acceptable paper and other print media
- Loading paper
- 2-sided printing
- Printing from a USB flash drive or digital camera supporting mass storage
- 2 Driver and Software
- Printer driver
- Windows®
- Macintosh
- Software
- 3 General Information
- 4 Options
- 5 Routine Maintenance
- 6 Troubleshooting
- A Appendix
- Index
General Information
100
3
Network
(Continued)
WLAN
(Continued)
WPS w/ PIN
Code
- - Configures the
wireless network
settings using
WPS with a PIN
code.
WLAN Status Status
Active(11n) /
Active(11b) /
Active(11g) / Wired
LAN Active / WLAN
OFF / AOSS Active /
Connection Failed
Displays wireless
Ethernet link
status.
Signal - Displays the
signal condition.
SSID - Displays SSID
[uses a maximum
of 32 digits and
characters 0-9,
a-z and A-Z in
ASCII values]
Comm. Mode
Ad-hoc /
Infrastructure
Displays the
current
Communication
Mode.
MAC Address - - Displays MAC
address of the
machine.
Set to
Default
Restores wireless network settings of the internal print server to
the factory settings.
WLAN Enable -
On / Off*
Turns the wireless
interface on or off.
Level 1 Level 2 Level 3 Level 4 Options Descriptions
The factory settings are shown in Bold with an asterisk.