User Manual
Table Of Contents
- User’s Guide HL-L9200CDW/HL-L9200CDWT/HL-L9300CDW/HL-L9300CDWT/HL-L9300CDWTT
- HL-L9300 series only
- User's Guides and where do I find them?
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Table of Contents
- 1 Printing Methods
- About this Machine
- Acceptable paper and other print media
- Loading paper
- 2-sided printing
- Printing from a USB flash drive or digital camera supporting mass storage
- 2 Driver and Software
- Printer driver
- Windows®
- Macintosh
- Software
- 3 General Information
- 4 Options
- 5 Routine Maintenance
- 6 Troubleshooting
- A Appendix
- Index
Routine Maintenance
161
5
d Hold the handle of the toner cartridge and gently push it forward to unlock it. Then pull it out of the drum
unit. Repeat this for all the toner cartridges.
IMPORTANT
• We recommend placing the toner cartridges on a piece of disposable paper or cloth in case you
accidentally spill or scatter toner.
• Handle the toner cartridges carefully. If toner scatters on your hands or clothes, immediately wipe or wash
it off with cold water.
e Clean the corona wire inside the drum unit by gently sliding the blue tab from left to right and right to left
several times.
IMPORTANT
Be sure to return the tab to the home position (1). If you do not, printed pages may have a vertical stripe.
f Repeat step e to clean each of three remaining corona wires.
1