User Manual
Table Of Contents
- User’s Guide HL-L9200CDW/HL-L9200CDWT/HL-L9300CDW/HL-L9300CDWT/HL-L9300CDWTT
- HL-L9300 series only
- User's Guides and where do I find them?
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Table of Contents
- 1 Printing Methods
- About this Machine
- Acceptable paper and other print media
- Loading paper
- 2-sided printing
- Printing from a USB flash drive or digital camera supporting mass storage
- 2 Driver and Software
- Printer driver
- Windows®
- Macintosh
- Software
- 3 General Information
- 4 Options
- 5 Routine Maintenance
- 6 Troubleshooting
- A Appendix
- Index
Routine Maintenance
169
5
Cleaning the paper pick-up roller 5
Cleaning the paper pick-up roller periodically may prevent paper jams by insuring the proper feeding of paper.
a Press and hold down to turn the machine off.
b Pull the paper tray completely out of the machine.
c If paper is loaded in the paper tray, remove it.
d Remove anything that is stuck inside the paper tray.
e Tightly wring out a soft, lint-free cloth soaked in lukewarm water, and then wipe the separator pad (1) of
the paper tray with it to remove dust.
f Wipe the two pick-up rollers (1) inside of the machine to remove dust.
g Reload the paper, and then put the paper tray firmly back in the machine.
h Turn on the machine.
1
1