User Manual
Table Of Contents
- User’s Guide HL-L9200CDW/HL-L9200CDWT/HL-L9300CDW/HL-L9300CDWT/HL-L9300CDWTT
- HL-L9300 series only
- User's Guides and where do I find them?
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Table of Contents
- 1 Printing Methods
- About this Machine
- Acceptable paper and other print media
- Loading paper
- 2-sided printing
- Printing from a USB flash drive or digital camera supporting mass storage
- 2 Driver and Software
- Printer driver
- Windows®
- Macintosh
- Software
- 3 General Information
- 4 Options
- 5 Routine Maintenance
- 6 Troubleshooting
- A Appendix
- Index
Routine Maintenance
170
5
Replacing periodic maintenance parts 5
The periodic maintenance parts must be replaced regularly to maintain print quality. The parts listed below
must be replaced after printing approximately 50,000 pages
1
for PF Kit MP and 100,000 pages
1
for PF Kit
1, PF Kit 2, Fuser and Laser.
Please contact Brother Customer Service or a Brother Authorized Service Center when the following
messages appear on the Touchscreen:
1
Letter or A4 size single-sided pages.
2
Life of part is approximate and may vary by type of use.
3
If the optional lower tray is installed on HL-L9200CDW.
Touchscreen message Description
Replace Fuser
2
Replace the fuser unit.
Replace Laser
2
Replace the laser unit.
Replace PF Kit 1
2
Replace the paper feeding kit for the paper tray.
Replace PF Kit 2
23
Replace the paper feeding kit for the lower tray (option).
Replace PF Kit MP
2
Replace the paper feeding kit for the multi-purpose tray.