User Manual
Table Of Contents
- User’s Guide HL-L9200CDW/HL-L9200CDWT/HL-L9300CDW/HL-L9300CDWT/HL-L9300CDWTT
- HL-L9300 series only
- User's Guides and where do I find them?
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Table of Contents
- 1 Printing Methods
- About this Machine
- Acceptable paper and other print media
- Loading paper
- 2-sided printing
- Printing from a USB flash drive or digital camera supporting mass storage
- 2 Driver and Software
- Printer driver
- Windows®
- Macintosh
- Software
- 3 General Information
- 4 Options
- 5 Routine Maintenance
- 6 Troubleshooting
- A Appendix
- Index
Troubleshooting
182
6
Paper jams 6
When you are adding new paper, always remove all the paper from the paper tray and straighten the
stack.This helps prevent multiple sheets of paper from feeding through the machine at one time and prevents
paper jams.
Paper is jammed in the multi-purpose tray 6
If the Touchscreen displays Jam MP Tray, follow these steps:
a Remove the paper from the MP tray.
b Remove any jammed paper from in and around the MP tray.
c Fan the paper stack, and then put it back in the MP tray.
d When loading paper in the MP tray, make sure that the paper stays under the maximum paper height
guides on both sides of the tray.
e Press Retry to resume printing.
Paper is jammed in Paper Tray 1 or Tray 2 6
If the Touchscreen displays Jam Tray, Jam Tray1 or Jam Tray2, follow these steps:
a Pull the paper tray completely out of the machine.
For Jam Tray or Jam Tray1: