User Manual
Table Of Contents
- User’s Guide HL-L9200CDW
- To create a better environment
- User's Guides and where do I find them?
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Table of Contents
- 1 Printing Methods
- About this Machine
- Acceptable paper and other print media
- Loading paper
- 2-sided printing
- Printing from a USB flash drive or digital camera supporting mass storage
- 2 Driver and Software
- Printer driver
- Windows®
- Macintosh
- Software
- 3 General Information
- 4 Options
- 5 Routine Maintenance
- 6 Troubleshooting
- A Appendix
- Index
Routine Maintenance
167
5
i Hold the handle of the toner cartridge and gently push it forward to unlock it. Then pull it out of the drum
unit.
Repeat this for all the toner cartridges.
IMPORTANT
Handle the toner cartridges carefully. If toner scatters on your hands or clothes, immediately wipe or wash
it off with cold water.
j Turn the drum unit over by holding the blue handles. Make sure that the drum unit gears (1) are on the
left side.
k Read the following information from the drum dot check sheet:
Dot Color problem: The color of printed dots is the color of the drum you will clean.
Dot location: The sheet has eight numbered columns. The number of the column with the printed dot
in it is used to find the dot position on the drum.
1