User Manual
Table Of Contents
- User’s Guide HL-L9200CDW
- To create a better environment
- User's Guides and where do I find them?
- Using the documentation
- Accessing Brother Utilities (Windows®)
- Table of Contents
- 1 Printing Methods
- About this Machine
- Acceptable paper and other print media
- Loading paper
- 2-sided printing
- Printing from a USB flash drive or digital camera supporting mass storage
- 2 Driver and Software
- Printer driver
- Windows®
- Macintosh
- Software
- 3 General Information
- 4 Options
- 5 Routine Maintenance
- 6 Troubleshooting
- A Appendix
- Index
Appendix
211
A
Printer A
1
The print speed may change depending on the type of document you print.
2
Print speed may be slower when the machine is connected by wireless LAN.
3
From Ready mode and standard tray
Interface A
1
Your machine has a Hi-Speed USB 2.0 interface. The machine can also be connected to a computer that has a USB 1.1 interface.
2
Third party USB ports are not supported.
3
For detailed network specifications, see Network (LAN) on page 212 and see the Network User’s Guide.
Model HL-L9200CDW
Automatic 2-sided Print Yes
Emulation
PCL6, BR-Script3 (PostScript
®
3™)
Resolution 600 600 dpi
Print Speed
12
Single side
print
Monochrome Up to 30 ppm (A4 size)
Up to 32 ppm (Letter size)
Full color Up to 30 ppm (A4 size)
Up to 32 ppm (Letter size)
2-sided Print Monochrome Up to 14 sides per minute (7 sheets per minute) (A4 or Letter size)
Full color Up to 14 sides per minute (7 sheets per minute) (A4 or Letter size)
First Print Time
3
(Color)
Less than 15 seconds at 23 C / 230 V
(Mono)
Less than 15 seconds at 23 C / 230 V
Model HL-L9200CDW
USB
Hi-Speed USB 2.0
12
We recommend using a USB 2.0 cable (Type A/B) that is no more than 2 meters long.
Ethernet
3
10BASE-T / 100BASE-TX
Use a straight-through Category 5 (or greater) twisted-pair cable.
Wireless LAN
3
IEEE 802.11b/g/n
(Infrastructure Mode/Ad-hoc Mode)
IEEE 802.11g (Wi-Fi Direct)