User Manual
Table Of Contents
- Product Safety Guide
- How to use this guide:
- Symbols and conventions used in the documentation
- Compilation and Publication Notice
- Choose a safe location for your product
- General precautions
- Connecting the product safely
- Servicing the product
- Product Warranty & Liability
- Approval Information (MFC only)
- Declaration of Conformity (Europe only)
- Declaration of Conformity for R&TTE (Radio and Telecommunications) Directive 1999/5/EC (Europe only) (Applicable to models with telecommunications and/or radio interfaces)
- IEC60825-1:2007 Specification (For 220-240V Models Only)
- Wireless LAN (Models with Wireless LAN function only)
- Disconnect device
- Wiring information (U.K. only)
- NFC (Models with NFC function only)
- LAN connection
- Radio interference
- Recycling information in accordance with the WEEE and Battery Directives
- International ENERGY STAR® Qualification Statement
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Other Information
- Brother customer service
- Unlawful use of copying equipment (MFC and DCP only)
7
Unplug this product from the wall socket before cleaning the product and the scanner glass
(MFC and DCP only). DO NOT use liquid or aerosol cleaners. Use a dry, lint-free soft cloth for
cleaning.
Avoid using this product during an electrical storm. There may be a remote risk of an electric
shock from lightning.
HOT SURFACE
After you have just used the product, some internal parts of the product will be extremely hot.
Wait for the product to cool down before you touch the internal parts of the product.
This product is heavy and weighs more than 20.0 kg. To prevent possible injuries, at least two
people should lift the product. One person should hold the front of the product, and one person
should hold the back, as shown in the illustration below. Be careful not to trap your fingers when
you put the product down.
If you use a Lower Tray, DO NOT carry the product with the Lower Tray as you may be injured
or cause damage to the product because it is not attached to the Lower Tray.