Quick Start Guide
Table Of Contents
- Online User's Guide HL-L9430CDN/HL-L9470CDN
- Table of Contents
- Before You Use Your Machine
- Introduction to Your Machine
- Paper Handling
- Print
- Print from Your Computer (Windows)
- Print from Your Computer (Mac)
- Secure Print Using a USB Flash Drive
- Print Data Directly from a USB Flash Drive
- Print Duplicate Copies
- Cancel a Print Job
- Test Print
- Network
- Supported Basic Network Features
- Configure Network Settings
- Wireless Network Settings
- Use the Wireless Network
- Before Configuring Your Machine for a Wireless Network
- Configure Your Machine for a Wireless Network Using the Setup Wizard from Your Computer
- Configure Your Machine for a Wireless Network Using the Machine's Control Panel Setup Wizard
- Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network Using the PIN Method of Wi-Fi Protected Setup™ (WPS)
- Configure Your Machine for a Wireless Network When the SSID Is Not Broadcast
- Configure Your Machine for an Enterprise Wireless Network
- Use Wi-Fi Direct®
- Enable/Disable Wireless LAN
- Print the WLAN Report
- Use the Wireless Network
- Network Features
- Security
- Before Using Network Security Features
- Configure Certificates for Device Security
- Supported Security Certificate Features
- Step by Step Guide for Creating and Installing a Certificate
- Create a Self-signed Certificate
- Create CSR and Install a Certificate from a Certificate Authority (CA)
- Import and Export the Certificate and Private Key
- Import and Export a CA Certificate
- Manage Multiple Certificates
- Use SSL/TLS
- Use SNMPv3
- Use IPsec
- Use IEEE 802.1x Authentication for a Wired or a Wireless Network
- Use Active Directory Authentication
- Use LDAP Authentication
- Use Secure Function Lock 3.0
- Send an Email Securely
- Store Print Log to Network
- Lock the Machine Settings from the Control Panel
- Administrator
- Mobile/Web Connect
- Brother iPrint&Scan
- Troubleshooting
- Error and Maintenance Messages
- Error Messages When Using the Brother Web Connect Feature
- Paper Jams
- Printing Problems
- Improve the Print Quality
- Network Problems
- AirPrint Problems
- Other Problems
- Check the Machine Information
- Reset Functions
- Routine Maintenance
- Machine Settings
- Appendix
Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features
Tables > Settings Tables
Settings Tables
>> [Settings]
>> [General Setup]
>> [Printer]
>> [Network]
>> [Print Reports]
>> [Machine Information]
>> [Initial Setup]
[Settings]
[Settings]
Level 2
Level 3 Level 4 Descriptions
Toner Toner Life
- View the approximate remaining toner life.
Test Print
- Print a test page.
Colour
Correction
Correction
Start
Perform colour calibration to check and correct colours,
and then perform registration to align the print position
of each colour.
Reset
Reset the calibration parameters to the default settings.
Network Wired LAN
- Access the Wired LAN setting menus.
WLAN(Wi-Fi)
1
- Access the WLAN setting menus.
Tray Setting
- - Access the tray setting menus.
Wi-Fi Direct
- - Access the Wi-Fi Direct setting menus.
Eco Mode
- - Turn the following machine settings on at the same
time.
• 2-sided Print: Long Edge
2
• Sleep Time: 0 Min
• Dim Timer: 10 Secs
• Quiet Mode:On
2
• Toner Save:On
2
All Settings
- - Configure the detailed settings.
1
For certain models, the wireless network connection can be used only when the optional Wireless Module is installed.
2
Changing this setting is available after you change certain machine settings using Web Based Management.
[General Setup]
[All Settings] > [General Setup]
Level 3
Level 4 Level 5 Level 6 Descriptions
Tray
Setting
Paper Type MP Tray
- Select the paper type that matches the paper in
the MP tray.
Tray 1
- Select the paper type that matches the paper in
the standard paper tray.
Tray 2
1
- Select the paper type that matches the paper in
the Optional Tray (Tray 2).
307