User Manual
Table Of Contents
- User’s Guide ADS-2000e/ADS-2500We
- Brother Numbers
- User’s Guides and where do I find them?
- Getting Started
- Table of Contents
- 1 General Information
- Using the Documentation
- About This Machine
- Control Panel Overview (ADS-2000e)
- Control Panel Overview (ADS-2500We)
- General Setup (ADS-2000e)
- General Setup (ADS-2500We)
- Set the Backlight Brightness
- Set the Dim Timer for the Backlight
- Set the Home Screen
- Select Your Language
- Memory Storage
- Beep Volume
- Automatic Daylight Saving Time
- Sleep Mode
- Power Down Mode
- Multifeed Detection
- Reduced Noise Mode
- Setting Lock
- Set the Password
- Change the Password
- Turn Setting Lock On/Off
- User Restriction Functions
- 2 Document Specifications
- 3 Scan Preparation
- 4 Prepare Your Network
- 5 Scan Using Your Computer
- Change the ControlCenter4 User Interface (Windows®)
- Scan Using ControlCenter4 in Home Mode (Windows®)
- Scan Using ControlCenter4 in Advanced Mode (Windows®)
- Create a Custom Tab (ControlCenter4 Advanced Mode) (Windows®)
- Change Scan Settings (ControlCenter4) (Windows®)
- Scan Using ControlCenter2 (Macintosh)
- Register Your Favorite Scan Settings Using ControlCenter2 (Macintosh)
- Change Scan Settings (ControlCenter2) (Macintosh)
- Scan Using Nuance™ PaperPort™ 12SE or Other Windows® Applications
- Use Nuance PDF Converter Professional 8 (Windows®)
- Use NewSoft Presto! BizCard 6 (Windows®)
- Scan Using Presto! PageManager or TWAIN Applications (Macintosh)
- Scan Using Apple Image Capture (ICA Driver)
- Use NewSoft Presto! BizCard 6 (Macintosh)
- Scan Using Captiva® QuickScan™ Pro or ISIS® Applications (Windows®)
- 6 Scan Using the Control Panel
- Save Scanned Documents on Your Computer
- Save Scanned Documents on a USB Flash Drive
- Scan Documents to an FTP Server (ADS-2500We only)
- Scan Documents to a Shared Folder / Network Location (Windows®) (ADS-2500We only)
- Scan Using Web Services (Windows Vista® SP2 or Later, Windows® 7, Windows® 8 and Windows® 8.1) (ADS-2500We)
- Send Scanned Documents Directly to an Email Address (ADS-2500We only)
- Set Up the Address Book (ADS-2500We only)
- Upload Scanned Documents to the Web (ADS-2500We only)
- Change Scan to PC Settings (Windows®)
- Change Scan to PC Settings (Macintosh)
- Scanner Shortcuts (ADS-2500We only)
- 7 Managing the Machine from Your Computer
- 8 Routine Maintenance
- 9 Troubleshooting
- A Specifications
- B Appendix
- C Index
Scan Using the Control Panel
137
6
Scan Using Scan to Network Profiles 6
1 Load your document.
2 Swipe left or right, or press d or c to display Scan 1.
3 Press to Network.
4 Press a or b to choose one of Network server profiles listed.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the profile on the LCD.
Press OK.
Do one of the following:
If the Scan to Network profile is complete, go to 7.
If the Scan to Network profile is not complete, go to 5.
5 Press Options.
6 Choose the settings for 2-sided Scan, Scan Type, Resolution, File Type, Document Size,
File Size, Auto Deskew, Skip Blank Page and User Name as needed. Press OK.
NOTE
• If you choose Secure PDF for File Type, the machine will ask you to enter a 4 digit password using
numbers 0-9 before it starts scanning.
• If you choose Signed PDF for File Type, you must install and then configure a certificate to your
machine using Web Based Management.
• If you want to save the settings as a shortcut, press Save as Shortcut.
7 Press Start.
The LCD displays Connecting. When the connection to the Network is successful the machine starts
the scanning process.