Quick Start Manual
Table Of Contents
- YL4MFC_US.PDF
- Front Cover
- Inside Front Cover
- Brother Numbers
- Ordering Accessories and Supplies
- Quick Reference Guide
- How to Access the Complete Owner's Manual (For MFC-4800 Only)
- How to Access Brother Support (For MFC-4800 Only) (For Windows® Only)
- Download the Printer Driver from the Brother Web Site (For FAX-2900 and FAX-3800 Only)
- Table of Contents
- 1.Introduction
- 2.Assembly and Connections
- Packing List
- Choosing a Location
- Assembly
- Installing the Drum Unit Assembly (with Toner Cartridge)
- Setting Up the FAX/MFC
- Loading Paper
- Acceptable Paper
- Paper Capacity of Multi-purpose Sheet Feeder
- Connecting an External Telephone
- Connecting an External Telephone Answering Device (TAD)
- Special Line Considerations
- Multi-Line Connections (PBX)
- Custom Features on Your Phone Line
- 3.On-Screen Programming
- 4.Initial Setup
- Getting Started
- Setting the Paper Size
- Setting the Date and Time
- Setting the Station ID
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Handset Volume
- Choosing the Handset Volume (For Volume Amplify)
- Setting Volume Amplify
- Memory Storage
- Turning On Automatic Daylight Savings Time
- Toner Save
- Sleep Mode
- Setting Tone/Pulse Dialing Mode (For Canada Only)
- Getting Started
- 5.Setup Receive
- 6.Setup Send
- 7.Auto Dial Numbers and Dialing Options
- 8.Telephone Services
- 9.Remote Fax Options
- 10.Printing Reports
- 11.Making Copies
- 12.Important Information
- 13.Troubleshooting and Routine Maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access Card
- Rear Cover
TROUBLESHOOTING AND ROUTINE MAINTENANCE
13 - 17
Cleaning the Printer
Caution
■ Do not use isopropyl alcohol to remove dirt from the control panel. It may cause
a crack on the panel.
■ Do not use isopropyl alcohol to clean the scanner window or the toner sensor.
■ Do not touch the scanner window with your finger.
■ Handle the drum unit carefully because it contains toner. If toner scatters and
your hands or clothes get dirty, immediately wipe or wash it off with cold water.
1
Open the top cover.
2
Remove the drum unit assembly.
WARNING
Just after you have used the FAX/MFC, some internal parts of the machine are
extremely HOT! When you open the top cover of the FAX/MFC, never touch
the shaded parts as shown in the diagram below.
3
Wipe the electric terminals with isopropyl alcohol on a cotton swab.
4
Wipe the gears with a clean dry cloth.
5
Gently wipe the scanner window and the toner sensor with a clean soft dry cloth.
Do NOT use isopropyl alcohol to clean the scanner window or the toner sensor.
Gears
Toner Sensor
Electrical
Terminal
Scanner Window
HOT!
Inside the Machine