Quick Reference Guide
1
11.5mm
7/16"
Actual
Size
Tamaño
real
Lower Threading
Enhebrado del hilo inferior
Quick Reference Guide
Guía de referencia rápida
See other side for “2. Upper Threading”.
Consulte en la otra cara “2. Enhebrado del hilo superior”.
Be sure to use the
correct bobbin.
Asegúrese de que
utiliza la bobina
correcta.
Please read “IMPORTANT
SAFETY INSTRUCTIONS” and
the detailed instructions in the
Operation Manual.
Lea “INSTRUCCIONES DE
SEGURIDAD IMPORTANTES” y
las instrucciones detalladas que
aparecen en el Manual de
instrucciones.
Pull up the spool
pin completely
•
Tire del portacarrete
completamente
•
With the end of the thread comes out from
the cover toward the rear of the machine
•
El extremo del hilo sale de la tapa hacia la parte
trasera de la máquina
•
Pass the thread through
the slit guide
•
Pase el hilo por la ranura
de la guía
•
Hold the bobbin
down
•
Mantenga la bobina
presionada
•
XF4109-101①
Align the notch to
the projection
•
Alinee la muesca
con el saliente
•
Slide the bobbin
winder shaft to the
right
•
Deslice el eje de la
devanadora hacia la
derecha
•
Click!
When the bobbin is
full, the bobbin will
spin slowly
•
Cuando esté llena, la
bobina girará
lentamente
•
Leave 1 cm (1/2 inch)
of thread from the
hole on the bobbin
•
Deje 1 cm (1/2 pulg.)
de hilo desde el orificio
de la bobina
•
Wind the thread few
times around the
bobbin
•
Enrolle el hilo unas
cuantas veces
alrededor de la bobina
•
7 – 10 cm
(3-4 inches)
•
7 – 10 cm
(3-4 pulg.)
•
Hold the end of
the thread
•
Sujete el
extremo del hilo
•
Pull the thread
completely
•
Tire del hilo
completamente
•