Instruction manual
Table Of Contents
- Go to Instruction Manual Top Page
- Cover-Top
- SAFETY INSTRUCTIONS
- CONTENTS
- 1. NAME OF EACH PART
- 2. SPECIFICATIONS
- 3. INSTALLATION
- 3-1. Power table
- 3-2. Installing the control box
- 3-3. Installing the rubber cushions
- 3-4. Installing the oil pan
- 3-5. Installing the cushions
- 3-6. Installing the switching plate
- 3-7. Installing the machine head
- 3-8. Installing the head rest
- 3-9. Installing the liquid cooling tank, optional
- 3-10.Installing the operation panel
- 3-11.Connecting the ground wire
- 3-12.Connecting the cords
- 3-13.Installing the belt cover
- 3-14.Installing the foot switch
- 3-15.Installing the spool stand
- 3-16.Installing the eye guard
- 4. LUBRICATION
- 5. OPERATION
- 6. CHECKING THE SEWING PATTERN
- 7. CORRECT USE
- 8. SEWING
- 9. MAINTENANCE AND INSPECTION
- 10. STANDARD ADJUSTMENTS
- 10-1.Adjusting the needle bar height
- 10-2.Adjusting the needle bar lift amount
- 10-3.Adjusting the driver needle guard
- 10-4.Adjusting the needle clearance
- 10-5.Adjusting the shuttle race thread guide
- 10-6.Adjusting the thread take-up amount
- 10-7.Adjusting the movable knife
- 10-8.Adjusting the work clamp lift amount
- 10-9.Work clamp pressure adjustment (KE-432B)
- 10-10. Work clamp closing-distance adjustment (KE-432B)
- 10-11. Work clamp interchangeability (KE-433B)
- 10-12. Adjusting the needle up stop position
- 10-13. Adjusting the thread wiper
- 10-14. Checking the input sensor and DIP switch input
- 10-15. Checking the input voltage
- 10-16. Clearing all memory settings
- 10-17. Moving stitch patterns
- 11. USING THE COUNTERS
- 12. CHANGING FUNCTIONS USING THE DIP SWITCHES
- 13. CHANGING SPECIAL FUNCTIONS USING THE MEMORY SWITCHES
- 14. TABLE OF ERROR CODES
- 15. GAUGE PARTS LIST ACCORDING TO SUBCLASSES
- 16. TROUBLESHOOTING
- 17. OPTIONAL PARTS
- Cover-Last
21
KE-430B, 431B, 432B, 433B
SELECT
PROGRAM NO.
COUNTER
X
-
SCALE
Y
-
SCALE
SPEED
P
5-2. Operating procedure
Program No.
X-scale (%)
Y-scale (%)
Speed (rpm)
Factory
default
0 *1
100
100
2,000
KE-431B KE-432B KE-433B
1 – 61 – 3 100 – *2
KE-430B
Variable range
1 – 35
20 – 200
20 – 200
1,000 – 2,500
1,000 – 2,700
SELECT
PROGRAM NO.
COUNTER
X
-
SCALE
Y
-
SCALE
SPEED
P
SELECT
PROGRAM NO.
COUNTER
X
-
SCALE
Y
-
SCALE
SPEED
P
Press the SELECT switch y
until the PROGRAM NO. in-
dicator illuminates.
Press the DISPLAY SET
switches !2 until the desired
program number is flashing
in the display window.
Depress the foot switch to
the second step.
* The display will stop flashing
and illuminates steadily, and
the feed mechanism will move
to the sewing start position.
This completes the setting of the pro-
gram number.
123
Press the SELECT switch y
until the X-scale or Y-scale
indicator illuminates.
Press the DISPLAY SET
switches !2 until the de-
sired scale setting is flash-
ing in the display window.
(The setting is displayed as a per-
centage.)
Depress the foot switch to
the second step.
* The display will stop flashing
and illuminates steadily, and
the feed mechanism will move
to the sewing start position.
123
Press the SELECT switch y
until the SPEED indicator il-
luminates.
Press the DISPLAY SET
switches !2 until the de-
sired speed setting is flash-
ing in the display window.
12
This completes the setting of the X-scale
or Y-scale.
y
y
y
!2
!2
1st step
2nd step
Preparation
Turn on the power switch.
(The POWER indicator q will illuminate and the pro-
gram number will flash in the display window !4.)
*1 For checking the origin points for X and Y feed
*2 Custom-made program
5-2-1. Setting the program number
Determine the appropriate program from the program list which is given on pp. 3 - 6.
5-2-2. Setting the X-scale and Y-scale
5-2-3. Setting the sewing speed
NOTE:
Be sure to check the sewing pattern
(refer to page 22) after setting has
been completed to make sure that
the needle hole does not go out of
the area circumscribed by the work
clamp.
5. OPERATION
!2
0083Q
0084Q
0085Q
0086Q
0087Q
0085Q
1st step
2nd step
0088Q
0089Q