Instruction manual
Table Of Contents
- Go to Instruction Manual Top Page
- Cover-Top
- SAFETY INSTRUCTIONS
- CONTENTS
- 1. NAME OF EACH PART
- 2. SPECIFICATIONS
- 3. INSTALLATION
- 3-1. Power table
- 3-2. Installing the control box
- 3-3. Installing the rubber cushions
- 3-4. Installing the oil pan
- 3-5. Installing the cushions
- 3-6. Installing the switching plate
- 3-7. Installing the machine head
- 3-8. Installing the head rest
- 3-9. Installing the liquid cooling tank, optional
- 3-10.Installing the operation panel
- 3-11.Connecting the ground wire
- 3-12.Connecting the cords
- 3-13.Installing the belt cover
- 3-14.Installing the foot switch
- 3-15.Installing the spool stand
- 3-16.Installing the eye guard
- 4. LUBRICATION
- 5. OPERATION
- 6. CHECKING THE SEWING PATTERN
- 7. CORRECT USE
- 8. SEWING
- 9. MAINTENANCE AND INSPECTION
- 10. STANDARD ADJUSTMENTS
- 10-1.Adjusting the needle bar height
- 10-2.Adjusting the needle bar lift amount
- 10-3.Adjusting the driver needle guard
- 10-4.Adjusting the needle clearance
- 10-5.Adjusting the shuttle race thread guide
- 10-6.Adjusting the thread take-up amount
- 10-7.Adjusting the movable knife
- 10-8.Adjusting the work clamp lift amount
- 10-9.Work clamp pressure adjustment (KE-432B)
- 10-10. Work clamp closing-distance adjustment (KE-432B)
- 10-11. Work clamp interchangeability (KE-433B)
- 10-12. Adjusting the needle up stop position
- 10-13. Adjusting the thread wiper
- 10-14. Checking the input sensor and DIP switch input
- 10-15. Checking the input voltage
- 10-16. Clearing all memory settings
- 10-17. Moving stitch patterns
- 11. USING THE COUNTERS
- 12. CHANGING FUNCTIONS USING THE DIP SWITCHES
- 13. CHANGING SPECIAL FUNCTIONS USING THE MEMORY SWITCHES
- 14. TABLE OF ERROR CODES
- 15. GAUGE PARTS LIST ACCORDING TO SUBCLASSES
- 16. TROUBLESHOOTING
- 17. OPTIONAL PARTS
- Cover-Last
KE-430B, 431B, 432B, 433B
58
15. GAUGE PARTS LIST ACCORDING TO SUBCLASSES
-3 –-2
R
154417-101
118249-001
154416-101
118250-001
S51852-001 S51084-001S51853-001
L
Spec.
Model KE-432BKE-431B
Work
clamp, U
Feed
plate
33
21
21
28
3
17
3
16
3
27
3
10
5
-1 -7
Part name
Presser blank
Feed plate blank
KE-433B
-2
433-1
S41352-001
433-1
S41354-001
433-2
S41353-001
433-2
S41355-001
Specification
Standard sizes for work clamps and feed plates are as follow:
(The actual sewing area has 1.5 mm margin on every size; inside the lines which the dimensions indicate.)
-1 -5-2 -7
R 152777-001 152779-001153608-101 S49695-001
152778-001
18
31
24
30.2
12
16
21.2
4
4
12
23
4
5.6
152780-001154527-001 S49694-001
S49698-001 S49700-001S49697-001 S49696-001
L
Spec.
KE-430B
Model
Work
clamp, U
Feed
plate
12
4
13.4
5.4
0196Q
0197Q
0483Q
0487Q
0484Q
0488Q
0485Q
0489Q
0485Q
0490Q
0491Q
0494Q
0492Q
0495Q
0493Q
0496Q