Datasheet

HOW TO INSTALL THE LOWER TRAY UNIT (LT-26CL)

Pull out the Upper Paper

Cassette, and then connect the

Lower Tray Unit with the printer

by sliding the locking clip to the

right on the top surface of the

Lower Tray Unit.

Fig. 8

10.

Install the right hand side cover

into the right side of the Lower

Tray Unit by first fitting the hook

at the front.

Install the left hand side cover by

fitting the hole at the rear side of

the side cover to the shaft of the

Lower Tray Unit. Close the side

cover by fitting the notch to the

hook of the Lower Tray Unit.

Fig. 9

11.

To level the tray unit, adjust the

Anchor Feet located at the front

and rear on the right hand side at

the bottom of the Lower Tray

Unit. The Anchor Foot moves up

and down as it is turned. It is

correctly adjusted when the

Anchor Foot touches the work

surface and the tray unit is level.

Turn the lock screw to secure the

Anchor Foot.

Fig. 10

Note

Do not load Transparencies, Labels and Envelopes in the cassette

installed into the optional Lower Tray Unit. It may cause paper jams.