USER'S GUIDE MFC-215C ,MFC-425CN

2 - 1 GETTING STARTED
2
Initial Setup
Setting the Date and Time
When the machine is not in use it will display the date and time. If you
set up the Station ID the date and time displayed by your machine
will be printed on every fax you send. If there is a power failure, you
may have to reset the date and time. No other settings will be
affected.
1 Press Menu/Set, 0, 2.
2 Enter the last two digits of the year.
Press
Menu/Set.
3 Enter two digits for the month.
Press
Menu/Set.
(For example, enter 09 for September, or 10 for October.)
4 Enter two digits for the day.
Press
Menu/Set. (For example, enter 06 for 6th.)
5 Enter the time in 24-Hour format.
Press
Menu/Set. (For example, enter 15:25 for 3:25 P.M.)
6 Press Stop/Exit.
The LCD now shows the date and time whenever the machine
is in Fax mode.
Setting Tone or Pulse dialling mode
Your machine comes set for Tone dialling service (Multi-frequency).
If you have Pulse dialling service (rotary), you need to change the
dialling mode.
1 Press Menu/Set, 0, 4.
2 Press ▲ or ▼ to select Pulse (or Tone).
Press
Menu/Set.
3 Press Stop/Exit.
Getting started