USER'S GUIDE MFC-215C ,MFC-425CN

2 - 5 GETTING STARTED
Setting the Paper Size
You can use five sizes of paper for printing copies: Letter, Legal, A4,
A5, and 10 x 15 cm and three sizes for printing faxes: Letter, Legal
and A4. When you change the type of paper you load in the machine,
you will need to change the setting for Paper Size at the same time
so your machine can fit an incoming fax on the page.
1 Press Menu/Set, 1, 3.
2 Press ▲ or ▼ to select Letter, Legal, A4, A5 or 10x15cm.
Press
Menu/Set.
3 Press Stop/Exit.
Setting the Ring Volume
You can turn the ring Off or you can select the ring volume level.
1 Press Menu/Set, 1, 4, 1.
2 Press ▲ or ▼ to select Low, Med, High or Off.
Press
Menu/Set.
3 Press Stop/Exit.
—OR—
You can adjust the ring volume when your machine is idle (not being
used). In Fax mode , press or to adjust the volume
level. Every time you press these keys, the machine will ring so you
can hear the active setting as the LCD shows it. The volume changes
with each key press. The new setting will stay until you change it
again.
Setting the Beeper Volume
You can change the beeper volume. The default (factory) setting is
Low. When the beeper is on, the machine will beep when you press
a key, make a mistake or you send or receive a fax.
1 Press Menu/Set, 1, 4, 2.
2 Press ▲ or ▼ to select your option.
(Low, Med, High or Off)
Press
Menu/Set.
3 Press Stop/Exit.