User Manual

9
9
Set the date and time
The machine displays the date and time, and if you
set up the station ID, the date and time displayed on
your machine will be printed on every fax you send.
a Press Menu, 0, 2.
2.Date&Time
b Enter the last two digits of the year on the dial
pad, and then press OK.
Year:2009
(e.g. Enter 0 9 for 2009.)
c Repeat for Month and Day, and Hours and
Minutes in 24-hour format.
d Press Stop/Exit.
10
Enter personal
information (Station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
a Press Menu, 0, 3.
3.Station ID
b Enter your fax number (up to 20 digits) on the
dial pad, and then press OK. To enter a “+” for
international codes, press l.
c Enter your name (up to 20 characters) using
the dial pad, and then press OK.
d Press Stop/Exit.
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the
same key as the last character, press c to
move the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press d or c to move the cursor to the
incorrect character, press Clear/Back.
Press
key
One
time
Two
times
Three
times
Four
times
2 ABC2
3 DEF 3
4 GH I 4
5 JKL5
6 MNO6
7 PQRS
8 TUV8
9 WXYZ
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
For details, see Entering Text in Appendix C
of the User's Guide.