User Manual
Table Of Contents
- Quick Setup Guide MFC-255CW MFC-295CN
- Start Here
- 1 Unpack the machine and check the components
- 2 Load plain Letter/A4 paper
- 3 Connect the power cord and telephone line
- 4 Install the ink cartridges
- 5 Check the print quality
- 6 Choose your language (if needed)
- 7 Choose the correct Receive Mode
- 8 Set the LCD contrast (if needed)
- 9 Set the date and time
- 10 Set your Station ID
- 11 Fax Transmission Report
- 12 Set tone or pulse dialing mode
- 13 Set the phone line compatibility
- 14 Automatic Daylight Savings Time
- 15 Send in the Product Registration Sheet (USA only)
- 16 Choose your connection type
- For USB interface users (Windows® 2000 Professional/XP/ XP Professional x64 Edition/ Windows Vista®)
- For USB interface users (Mac OS X 10.3.9 or greater)
- For wired network interface users (MFC-295CN only) (Windows® 2000 Professional/XP/ XP Professional x64 Edition/ Windows Vista®)
- For wired network interface users (MFC-295CN only) (Mac OS X 10.3.9 or greater)
- For wireless network interface users (MFC-255CW only)
- Install Optional Applications Windows®
- For Network Users
- Consumables
- brother USA/CAN
- Start Here
27
Macintosh
Wired Network
Windows
®
Macintosh
Wired Network
e If the machine is configured for your network,
choose the machine from the list, and then click
OK.
f When this screen appears, click OK.
The installation of MFL-Pro Suite is now
complete.
Go to step 20 on page 27.
20
Install
Presto! PageManager
When Presto! PageManager is installed OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
a Double-click the Presto! PageManager icon
and follow the on-screen instructions.
21
Install MFL-Pro Suite on
additional computers
(if needed)
If you want to use your machine with multiple
computers on the network, install MFL-Pro Suite on
each computer. Go to step 19 on page 26. Also see
step 17-a on page 25 before you install.
Note
• If your machine is not found over the network,
confirm your network settings.
• If this screen appears click OK.
Enter a name for your Macintosh in
Display Name up to 15 characters long and
click OK. Go to f.
The name you enter will appear on the
machine’s LCD when you press the Scan key
and choose a scan option. (For more
information, see Network Scanning in the
Software User’s Guide on the CD-ROM.)
Finish
The installation is now
complete.