User Manual
Table Of Contents
- Quick Setup Guide MFC-255CW MFC-295CN
- Start Here
- 1 Unpack the machine and check the components
- 2 Load plain Letter/A4 paper
- 3 Connect the power cord and telephone line
- 4 Install the ink cartridges
- 5 Check the print quality
- 6 Choose your language (if needed)
- 7 Choose the correct Receive Mode
- 8 Set the LCD contrast (if needed)
- 9 Set the date and time
- 10 Set your Station ID
- 11 Fax Transmission Report
- 12 Set tone or pulse dialing mode
- 13 Set the phone line compatibility
- 14 Automatic Daylight Savings Time
- 15 Send in the Product Registration Sheet (USA only)
- 16 Choose your connection type
- For USB interface users (Windows® 2000 Professional/XP/ XP Professional x64 Edition/ Windows Vista®)
- For USB interface users (Mac OS X 10.3.9 or greater)
- For wired network interface users (MFC-295CN only) (Windows® 2000 Professional/XP/ XP Professional x64 Edition/ Windows Vista®)
- For wired network interface users (MFC-295CN only) (Mac OS X 10.3.9 or greater)
- For wireless network interface users (MFC-255CW only)
- Install Optional Applications Windows®
- For Network Users
- Consumables
- brother USA/CAN
- Start Here
36
Windows
®
Wireless Network
i The installation of the Brother drivers will
automatically start. The installation screens
appear one after another.
j When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, close your
web browser to return to this window.
Then click Next.
22
Finish and restart
a Click Finish to restart your computer. After
restarting the computer, you must be logged on
with Administrator rights.
b Choose the firmware update setting and click
OK.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few seconds for all
screens to appear.
Note
For Windows Vista
®
, when this screen appears,
click the check box and click Install to complete
the installation correctly.
Note
• If an error message appears during the
software installation, run the Installation
Diagnostics located in
Start/All Programs/Brother/MFC-XXXX
(where MFC-XXXX is your model name).
• If you are using an antivirus software, a
warning window might appear when using the
machine. If the warning dialog window
appears, allow access to continue.
Note
Internet access is required for the firmware
update.