User Manual
Table Of Contents
- Quick Setup Guide MFC-255CW MFC-295CN
- Start Here
- 1 Unpack the machine and check the components
- 2 Load plain Letter/A4 paper
- 3 Connect the power cord and telephone line
- 4 Install the ink cartridges
- 5 Check the print quality
- 6 Choose your language (if needed)
- 7 Choose the correct Receive Mode
- 8 Set the LCD contrast (if needed)
- 9 Set the date and time
- 10 Set your Station ID
- 11 Fax Transmission Report
- 12 Set tone or pulse dialing mode
- 13 Set the phone line compatibility
- 14 Automatic Daylight Savings Time
- 15 Send in the Product Registration Sheet (USA only)
- 16 Choose your connection type
- For USB interface users (Windows® 2000 Professional/XP/ XP Professional x64 Edition/ Windows Vista®)
- For USB interface users (Mac OS X 10.3.9 or greater)
- For wired network interface users (MFC-295CN only) (Windows® 2000 Professional/XP/ XP Professional x64 Edition/ Windows Vista®)
- For wired network interface users (MFC-295CN only) (Mac OS X 10.3.9 or greater)
- For wireless network interface users (MFC-255CW only)
- Install Optional Applications Windows®
- For Network Users
- Consumables
- brother USA/CAN
- Start Here
5
4
Install the ink cartridges
CAUTION
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
a Make sure that the power is turned on.
The LCD shows:
No Cartridge
b Open the ink cartridge cover a.
c Remove the green protective part a.
d Unpack the ink cartridge.
e Turn the green knob on the protective yellow
cap clockwise until it clicks to release the
vacuum seal, then remove the cap a.
f Take care to match the color of the lever a
with the cartridge color b, as shown in the
diagram below.
g Install each ink cartridge in the direction of the
arrow on the label.
Note
Do not throw away the green protective part. You
will need it if you transport the machine.
1
1
1
1
2