User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- Windows®
- 1 Printing
- 2 Scanning
- Scanning a document using the TWAIN driver
- Scanning a document using the WIA driver (Windows® XP/Windows Vista®)
- Scanning a document using the WIA driver (Windows Photo Gallery and Windows Fax and Scan users)
- Using ScanSoft™ PaperPort™ 11SE with OCR by NUANCE™
- 3 ControlCenter3
- 4 Remote Setup (Not available for DCP models, MFC-255CW and MFC-295CN)
- 5 Brother PC-FAX Software (MFC models only)
- 6 PhotoCapture Center®
- 7 Firewall settings (For Network users)
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center®
- Using the Scan key
- Index
- brother USA
Scanning
40
2
Custom
For Models without a scanner ADF
User adjustable from 0.35 × 0.35 in. (8.9 × 8.9 mm) to 8.5 × 11.7 in. (215.9 × 297 mm)
For Letter scanning models with ADF
User adjustable from 0.35 × 0.35 in. (8.9 × 8.9 mm) to 8.5 × 14 in. (215.9 × 355.6 mm)
If you choose Custom as the size, the Custom Document Size dialog box appears.
Enter the Name, Width and Height of the document.
You can choose “mm” or “inch” as the unit for Widt h and Height.
Note
You can see the actual paper size you chose on the screen.
• Width: shows the width of scanning area.
• Height: shows the height of scanning area.
• Data Size: shows the approximate data size in Bitmap format. The size will vary depending on the type
of file, resolution and number of colors used.