Network User's Guide
Table Of Contents
- MANUAL DO UTILIZADOR DE REDE
- Índice
- 1 Introdução
- 2 Configurar a sua máquina para funcionar em rede com uma ligação por cabo Ethernet (Não disponível para MFC-253CW, MFC-255CW e MFC-257CW)
- Descrição geral
- Endereços IP, máscaras de sub-rede e gateways
- Diagrama passo a passo
- Definir o endereço IP e a máscara de sub-rede
- Alterar as definições do servidor de impressão
- Utilizar o utilitário BRAdmin Light para alterar as definições do servidor de impressão
- Utilizar o utilitário BRAdmin Professional 3 para alterar as definições de redes sem fios (Windows®)
- Utilizar a Configuração Remota para alterar as definições do servidor de impressão (Não disponível para Windows Server® 2003/2008) (Não disponível para modelos DCP, MFC-253CW, MFC-255CW, MFC-257CW e MFC-295CN)
- Utilizar o painel de controlo para alterar as definições do servidor de impressão
- 3 Configurar a sua máquina para uma rede sem fios (Não disponível para DCP-365CN, DCP-395CN e MFC-295CN)
- Descrição geral
- Termos e conceitos de rede sem fios
- Diagrama passo a passo para a configuração da rede sem fios
- Confirmar o ambiente de rede
- Confirmar o método de configuração da rede sem fios
- Configuração utilizando o Assistente de Configuração do painel de controlo da máquina para configurar a máquina de rede sem fios
- Configuração utilizando o menu SES/WPS/AOSS do painel de controlo (Apenas no modo de infra-estrutura)
- Configuração utilizando o Método PIN da Wi-Fi Protected Setup™ (Apenas no modo de infra-estrutura)
- Configuração utilizando a aplicação de instalação automática Brother incluída no CD-ROM para configurar a máquina de rede sem fios
- Configurar a sua máquina para uma rede sem fios
- Utilizar o Assistente de Configuração a partir do painel de controlo
- Utilizar o menu SES, WPS ou AOSS do painel de controlo para configurar a máquina para uma rede sem fios
- Utilizar o Método PIN da Wi-Fi Protected Setup™
- Utilizar o programa de instalação automática da Brother, incluído no CD-ROM, para configurar a sua máquina para uma rede sem fios
- 4 Configuração sem fios para Windows® utilizando a aplicação de instalação automática Brother (Para DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW e MFC-795CW)
- 5 Configuração sem fios para Macintosh utilizando a aplicação de instalação automática Brother (Para DCP-373CW, DCP-375CW, DCP-377CW, DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW e MFC-795CW)
- 6 Configuração do painel de controlo
- Menu Rede
- TCP/IP
- Assistente de configuração (para modelos sem fios)
- SES/WPS/AOSS (para modelos sem fios)
- WPS com código PIN (para modelos sem fios)
- Estado WLAN (para modelos sem fios)
- Ethernet (Não disponível para MFC-253CW, MFC-255CW e MFC-257CW)
- Endereço MAC
- Interface de rede (Para modelos sem fios, não disponível para MFC-253CW, MFC-255CW e MFC-257CW)
- Activar WLAN (Para MFC-253CW, MFC-255CW e MFC-257CW)
- Repor as predefinições de fábrica de rede
- Imprimir a lista de configurações da rede
- Menu Rede
- 7 Assistente de instalação do controlador (apenas Windows®)
- 8 Impressão em rede a partir da impressão ponto-a-ponto básica com TCP/IP do Windows®
- 9 Impressão em rede em Macintosh
- 10 Resolução de problemas
- Anexo A
- Anexo B
- Anexo C
- Índice remissivo
Anexo C
161
C
Original SSLeay License C
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was
written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared
to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc.,
code; not just the SSL code. The SSL documentation included with this distribution is covered by the same
copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this
package is used in a product, Eric Young should be given attribution as the author of the parts of the library
used. This can be in the form of a textual message at program startup or in documentation (online or textual)
provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgement: "This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library being used are
not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code)
you must include an acknowledgement: "This product includes software written by Tim Hudson
(tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be
changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU
Public Licence.]










