User Manual

Table Of Contents
106
Cleaning the scanner glass B
a Lift the document cover (1). Clean the
scanner glass (2) and the white
plastic (3) with a soft lint-free cloth
moistened with a non-flammable glass
cleaner.
b (MFC-295CN only)
In the ADF unit, clean the white bar (1)
and the glass strip (2) with a soft,
lint-free cloth moistened with a
non-flammable glass cleaner.
Note
In addition to cleaning the scanner glass
and glass strip with a non-flammable glass
cleaner, run your finger tip over the
scanner glass and glass strip to see if you
can feel anything on it. If you feel dirt or
debris, clean the scanner glass and glass
strip again concentrating on that area. You
may need to repeat the cleaning process
three or four times. To test, make a copy
after each cleaning attempt.
Cleaning the machine’s
printer platen B
CAUTION
Be sure to unplug the machine from the
electrical socket before cleaning the printer
platen to avoid electrical shock.
a Lift the scanner cover until it locks
securely in the open position.
b Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a soft, dry lint-free
cloth.
2
1
3
1
2
1