User Manual

124
8.Ink
Management
1.Test Print — Print Quality
Alignment
Lets you check the print
quality or alignment.
108
2.Cleaning — Black
Color
All
Lets you clean the print
head.
107
3.Ink Volume — — Lets you check the
available ink volume.
109
0.Initial
Setup
1.Receive
Mode
— Fax Only*
Fax/Tel
External TAD
Manual
Choose the Receive
mode that best suits your
needs.
34
2.Date&Time — — Puts the date and time on
the LCD and in headings
of faxes you send.
See
Quick
Setup
Guide.
3.Station ID — Fax:
Name:
Set your name and fax
number to appear on each
page you fax.
4.Tone/Pulse — Tone*
Pulse
Choose the dialling mode.
5.Dial Tone — Detection
No Detection*
Turns Dial Tone Detection
on or off.
93
6.
Phone Line
Set
— Normal*
PBX
ISDN
Choose the telephone line
type.
38
7.
Compatibility — Normal*
Basic(for VoIP)
Adjusts the equalization
for transmission
problems.
93
8.Reset 1.Network — Resets the print server
back to its factory default
settings, such as the
password and IP address
information.
110
2.
Speed Dial&Fax — Deletes all stored
Speed Dial numbers and
restores the Station ID,
Quick Dial List,
Transmission Verification
Report and Fax Journal
back to the factory default
settings.
110
3.All Settings — Resets all the machine’s
settings back to the
settings that were set at
the factory.
110
Main Menu Submenu Menu Selections Options Descriptions Page
See Network User's Guide on the CD-ROM.
The factory settings are shown in Bold with an asterisk.