User Manual
Table Of Contents
- USER’S GUIDE MFC-253CW MFC-255CW MFC-257CW MFC-295CN
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II: Fax
- 5 Sending a Fax
- 6 Receiving a Fax
- 7 Telephone and External devices
- 8 Dialling and storing numbers
- 9 Printing Reports
- Section III: Copy
- Section IV: Direct Printing
- 11 Printing photos from a memory card or USB Flash memory drive
- 12 Printing photos from a camera (MFC-295CN only)
- Section V: Software
- Section VI: Appendixes
- Index
- brother SAF
Loading paper and documents
15
2
Handling and using print
media 2
Store paper in its original packaging, and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
Avoid touching the shiny (coated) side of
photo paper. Load photo paper with the
shiny side facing down.
Avoid touching either side of
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
IMPORTANT
DO NOT use the following kinds of paper:
• Damaged, curled, wrinkled, or
irregularly shaped paper
1 2 mm or greater curl may cause jams
to occur
• Extremely shiny and highly textured
paper
• Paper that cannot be arranged
uniformly when stacked
• Paper made with a Short grain paper
Paper capacity of the output paper
tray cover
2
Up to 50 sheets of 80 g/m
2
or 20 lb A4 paper.
Transparencies and photo paper must be
picked up from the output paper tray cover
one page at a time to avoid smudging.
1
1