User Manual
Table Of Contents
- USER’S GUIDE MFC-253CW MFC-255CW MFC-257CW MFC-295CN
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II: Fax
- 5 Sending a Fax
- 6 Receiving a Fax
- 7 Telephone and External devices
- 8 Dialling and storing numbers
- 9 Printing Reports
- Section III: Copy
- Section IV: Direct Printing
- 11 Printing photos from a memory card or USB Flash memory drive
- 12 Printing photos from a camera (MFC-295CN only)
- Section V: Software
- Section VI: Appendixes
- Index
- brother SAF
Printing photos from a memory card or USB Flash memory drive
67
11
e Do one of the following:
To change the quality press OK and
go to step f.
To start scanning press Mono Start
or Colour Start.
f Press a or b to choose the quality, and
then press OK.
Do one of the following:
To change the file type, go to step g.
To start scanning press Mono Start
or Colour Start.
g Press a or b to choose the file type,
choose one of the options below:
To change the file name press OK
and go to step h.
To start scanning press Mono Start
or Colour Start.
h The file name is set automatically.
However, you can set a name of your
choice using the dial pad. You can only
change the first 6 digits.
Press Mono Start or Colour Start.
Changing the image quality 11
a Press Menu, 4, 0, 1.
b Press a or b to choose
B/W 200x100 dpi, B/W 200 dpi,
Color 150 dpi, Color 300 dpi or
Color 600 dpi.
Press OK.
c Press Stop/Exit.
Changing the monochrome
file format 11
a Press Menu, 4, 0, 2.
b Press a or b to choose TIFF or PDF.
Press OK.
c Press Stop/Exit.
Changing the colour file
format 11
a Press Menu, 4, 0, 3.
b Press a or b to choose PDF or JPEG.
Press OK.
c Press Stop/Exit.