User's Guide
Table Of Contents
- USER'S GUIDE MFC-3420C/MFC-3820CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Loading originals and paper
- 3 On-screen programming
- 4 Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Walk-Up PhotoCapture Center™ (MFC-3820CN only)
- 12 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the Uni...
- ˘˘Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- LAN connection
- International ENERGY STAR® Compliance Statement
- ˘Important safety instructions
- Trademarks
- 13 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother
QUICK-DIAL NUMBERS AND DIALING OPTIONS 7 - 6
Pause
Press
Redial/Pause
to insert a 3.5-second pause between
numbers. If you are dialing overseas, you can press
Redial/Pause
as many times as needed to increase the length of the pause.
Fax Redial
If you’re sending a fax manually and the line is busy, press
Redial/Pause
to try again. Any time you want to make a second call
to the last number dialed, press
Redial/Pause
to save time.
If you’re sending a fax automatically and the line is busy, the MFC
will automatically redial one time five minutes after the transmission.
Tone or Pulse
If you have a Pulse dialing service, but need to send Tone signals
(for example, for telephone banking), follow the instructions below. If
you have Touch Tone service, you will not need this feature to send
tone signals.
1
Lift the handset of the external phone.
2
Press
#
on the control panel of your MFC. Any digits dialed after
this will send tone signals.
3
When you hang up, the MFC will return to the Pulse dialing
service.