User's Guide
Table Of Contents
- USER'S GUIDE MFC-3420C/MFC-3820CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Loading originals and paper
- 3 On-screen programming
- 4 Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Walk-Up PhotoCapture Center™ (MFC-3820CN only)
- 12 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the Uni...
- ˘˘Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- LAN connection
- International ENERGY STAR® Compliance Statement
- ˘Important safety instructions
- Trademarks
- 13 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother
REMOTE FAX OPTIONS 8 - 4
Setting your Remote Access Code
The remote access code lets you access the Remote Retrieval
features when you are away from your MFC. Before you use the
remote access and retrieval features, you have to set up your own
code. The default code is inactive code (--- ).
1
Press
Menu/Set
,
2
,
5
,
3
.
2
Enter a three-digit code using
numbers
0
-
9
, or
#
.
Press
Menu/Set
. (The preset ‘ ’ cannot be changed.)
3
Press
Stop/Exit
.
Do not use the same digits that appear in your Fax Receive
Code
(
51
) or Telephone Answer Code (
#51
).
(See Operation from extension telephones on page 5-6.)
You can change your code at any time by entering a new one.
If you want to make your code inactive, press
Stop/Exit
in Step
2 to restore the inactive setting (--- ).
3.Remote Access