User's Guide
Table Of Contents
- USER'S GUIDE MFC-3420C/MFC-3820CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Loading originals and paper
- 3 On-screen programming
- 4 Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Walk-Up PhotoCapture Center™ (MFC-3820CN only)
- 12 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the Uni...
- ˘˘Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- LAN connection
- International ENERGY STAR® Compliance Statement
- ˘Important safety instructions
- Trademarks
- 13 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother
LOADING ORIGINALS AND PAPER 2 - 1
2
Load originals
You can copy and scan from the ADF (automatic document feeder)
or from the scanner glass.
Using the automatic document feeder (ADF)
The ADF can hold up to 20 pages and feeds each sheet individually.
Use standard (20 lb or 80 g/m
2
) paper and always fan the pages
before putting them in the ADF.
Recommended environment
Temperature: 68° F - 86° F
Humidity: 50% - 70%
Paper: 20 lb LTR
■
Make sure originals written with ink are completely dry.
■
Originals to be faxed must be from 5.8 to 8.5 inches wide and 5.8
to 14 inches long.
1
Unfold the ADF Document Support.
Loading originals and paper
DO NOT use paper that is curled, wrinkled, folded, ripped,
stapled, paper clipped, pasted or taped.
DO NOT use cardboard, newspaper or fabric. (To fax or scan
this kind of original, see Faxing from the scanner glass on page
6-3)
ADF Document
Support