User's Guide

2 - 4 LOADING ORIGINALS AND PAPER
About paper
The print quality of your original can be affected by the kind of paper
you use in the MFC.
To get the best print quality for the settings you’ve chosen, always
set the Paper Type to match the type of paper you load.
You can use plain paper, inkjet paper (coated paper), glossy paper,
transparencies and envelopes.
We recommend testing various paper types before purchasing large
quantities.
For best results, use the recommended paper.
Handling and using special paper
■
Store paper in its original packaging, and keep it sealed. Keep the
paper flat and away from moisture, direct sunlight and heat.
■
The coated side of glossy paper is shiny. Avoid touching the
shiny (coated) side. Load glossy paper with the shiny side facing
up toward you.
■
Avoid touching either side of transparencies, because they
absorb water and perspiration easily, and this may cause
decreased output quality. Transparencies designed for laser
printers/copiers may stain your next original. Use only
transparencies recommended for inkjet printing.
Recommended paper
When you print on inkjet paper (coated paper), transparencies
and glossy paper, be sure to select the proper media in the
“Basic” tab in the printer driver.
Also avoid stacking by removing each page after it exits the
MFC to avoid smudging.
The output quality depends on the paper type and paper brand.
Visit us at http://solutions.brother.com
and check the latest
recommendations for paper that can be used with your MFC.