User's Guide
Table Of Contents
- USER'S GUIDE MFC-3420C/MFC-3820CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Loading originals and paper
- 3 On-screen programming
- 4 Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Walk-Up PhotoCapture Center™ (MFC-3820CN only)
- 12 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the Uni...
- ˘˘Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- LAN connection
- International ENERGY STAR® Compliance Statement
- ˘Important safety instructions
- Trademarks
- 13 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother
ON-SCREEN PROGRAMMING 3 - 2
Navigation keys
You can access the menu mode by pressing
Menu/Set
.
When you enter the menu, the LCD scrolls.
Press
1
for General Setup menu
—OR—
Press
2
for Fax menu
—OR—
Press
3
for Copy menu
Press
0
for Initial Setup
You can scroll more quickly through each menu level by pressing the
arrow for the direction you want: or .
Then set an option by pressing
Menu/Set
when that option appears
on the LCD.
The LCD will then show the next menu level.
Press or to scroll to your next menu selection.
Press
Menu/Set
.
When you finish setting an option, the LCD shows
Accepted
.
*Access the menu
*Go to the next menu level
*Accept an option
*Scroll through the current
menu level
*Go back to the previous
menu level
*Exit the menu
Use to scroll backward if you passed your choices or want
to save keystrokes.
1.General Setup
2.Fax
3.Copy
....
0.Initial Setup