User's Guide

3 - 9 ON-SCREEN PROGRAMMING
4.Test Print
(MFC-3420C
only)
6.Test Print
(MFC-3820CN
only)
You can print a test
sample page to
check the print
quality and adjust the
Vertical Alignment.
13-11
5.LAN
(MFC-3820CN
only)
1.Setup
TCP/IP
1
.
BOOT Method Auto
Static
RARP
BOOTP
DHCP
You can choose the
BOOT method that
best suits you needs.
See
Network
User’s
Guide
on the
CD-ROM
2.IP Address [000-255].
[000-255].
[000-255].
[000-255]
Enter the IP address.
3
.
Subnet Mask
[000-255].
[000-255].
[000-255].
[000-255]
Enter the Subnet
mask.
4.Gateway [000-255].
[000-255].
[000-255].
[000-255]
Enter the Gateway
address.
5.Host Name BRN_XXXXXX Enter the Host name.
6
.
WINS Config Auto
Static
You can choose the
WINS configuration
mode.
7.WINS
Server
(Primary)
000.000.000.000
Specifies the IP
address of the
primary or secondary
server.
8.DNS Server
(Primary)
000.000.000.000
Specifies the IP
address of the
primary or secondary
server.
Main Menu Submenu Menu
Selections
Options Descriptions Page
The factory settings are shown in Bold.
*
1
See the complete Software User’s Guide on the CD-ROM.
to
accept
to
exit
Press the Menu numbers.
(ex. Press 1, 2 for Paper Type)
—
OR
—
Select & Set Select & Set