User's Guide
Table Of Contents
- USER'S GUIDE MFC-3420C/MFC-3820CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Loading originals and paper
- 3 On-screen programming
- 4 Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Walk-Up PhotoCapture Center™ (MFC-3820CN only)
- 12 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the Uni...
- ˘˘Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- LAN connection
- International ENERGY STAR® Compliance Statement
- ˘Important safety instructions
- Trademarks
- 13 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother
4 - 7 GETTING STARTED
Setting the Ring Volume
You can adjust the ring volume when your MFC is idle (not being
used). You can turn the ring
Off
or you can select the ring volume
level.
1
Press
Menu/Set
,
1
,
4
,
1
.
2
Press or to select
(
Low
,
Med
,
High
or
Off
).
Press
Menu/Set
.
3
Press
Stop/Exit
.
—OR—
In Fax mode, press or to adjust the volume level. Every time
you press these keys, the MFC will ring so you can hear the active
setting as the LCD shows it. The volume changes with each key
press. The new setting will stay until you change it again.
Setting the Beeper Volume
You can change the beeper volume. The default (factory) setting is
Low
. When the beeper is on, the MFC beeps every time you press a
key or make a mistake and after a fax is sent or received.
1
Press
Menu/Set
,
1
,
4
,
2
.
2
Press or to select your
option.
(
Low
,
Med
,
High
or
Off
)
Press
Menu/Set
.
3
Press
Stop/Exit
.
1.Ring
2.Beeper