User's Guide
Table Of Contents
- USER'S GUIDE MFC-3420C/MFC-3820CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Loading originals and paper
- 3 On-screen programming
- 4 Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Walk-Up PhotoCapture Center™ (MFC-3820CN only)
- 12 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the Uni...
- ˘˘Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- LAN connection
- International ENERGY STAR® Compliance Statement
- ˘Important safety instructions
- Trademarks
- 13 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother
6 - 7 SETUP SEND
Fax Resolution
You can use the
Fax Resolution
key to change the setting
temporarily (for this fax only). Press
Fax Resolution
and
or
to select the setting you want, and then press
Menu/Set
.
—OR—
You can change the default setting:
1
If it is not illuminated in green, press (
Fax
).
2
Load your original. (See
Load originals
on page 2-1.)
3
Press
Menu/Set
,
2
,
2
,
2
.
4
Press or to select the
resolution you want.
Press
Menu/Set
.
5
Press
Stop/Exit
.
Standard
Suitable for most typed originals.
Fine
Good for small print and transmits a little
slower than Standard resolution.
S. Fine
Good for small print or artwork and transmits
slower than Fine resolution.
Photo
Use when the original has varying shades of
gray. This has the slowest transmission
time.
2.Fax Resolution