User's Guide
Table Of Contents
- USER'S GUIDE MFC-3420C/MFC-3820CN
- Brother numbers
- Ordering accessories and supplies
- Safety precautions
- Choosing a location
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Loading originals and paper
- 3 On-screen programming
- 4 Getting started
- 5 Setup Receive
- 6 Setup Send
- 7 Quick-Dial numbers and dialing options
- 8 Remote Fax Options
- 9 Printing reports
- 10 Making copies
- 11 Walk-Up PhotoCapture Center™ (MFC-3820CN only)
- 12 Important information
- Standard telephone and FCC Notices These notices are in effect on models sold and used in the Uni...
- ˘˘Federal Communications Commission (FCC) Declaration of Conformity (USA only)
- Industry Canada Compliance Statement (Canada only)
- LAN connection
- International ENERGY STAR® Compliance Statement
- ˘Important safety instructions
- Trademarks
- 13 Troubleshooting and routine maintenance
- Glossary
- Specifications
- Index
- Remote Retrieval Access card
- brother
7 - 1 QUICK-DIAL NUMBERS AND DIALING OPTIONS
7
Storing numbers for easy dialing
You can set up your MFC to do two types of easy dialing: Speed-Dial
and Groups for Broadcasting faxes.
Storing Speed-Dial numbers
You can store Speed-Dial numbers, so that when you dial you will
only have to press a few keys (
Search/Speed Dial
,
#
, the two-digit
number, and
Black
Start
or
Color Start
). The MFC-3420C can
store 40 Speed-Dial numbers and the MFC-3820CN can store 100
numbers.
1
Press
Menu/Set
,
2
,
3
,
1
.
2
Use the dial pad to enter a two-digit
Speed-Dial location number
(01-40 for MFC-3420C, 00-99 for MFC-3820CN).
(For example, press
05
.) Press
Menu/Set
.
3
For MFC-3820CN, press or to select
Type:Fax/Tel
(or
E-Address
).
Press
Menu/Set
.
4
Enter the phone or fax number (up to 20 digits).
Press
Menu/Set
.
Quick-Dial numbers and
dialing options
If you lose electrical power, the quick-dial numbers that are in
the memory will not be lost.
(For USA only) The Brother fax back system number has been
preprogrammed in Speed-Dial location
1
.
The MFC-3820CN will ask you if the Speed-Dial is for a
fax/telephone number or an e-mail address.
For information on using an E-mail address, see Chapter 6
Internet Fax in the Network User’s Guide. (MFC-3820CN only)
2.Speed-Dial