GUIDE DE L’UTILISATEUR MFC-5890CN MFC-5895CW MFC-6490CW Version 0 SWI/BEL-FRE
Si vous devez appeler le service à la clientèle Remplissez les informations suivantes à des fins de référence ultérieure : Numéro du modèle : MFC-5890CN, MFC-5895CW et MFC-6490CW (Entourez le numéro de votre modèle) Numéro de série : 1 Date d'achat : Lieu d'achat : 1 Le numéro de série se trouve à l'arrière de l'appareil. Gardez ce Guide de l'utilisateur avec votre reçu comme confirmation de la date d'achat de votre appareil en cas de vol, d'incendie ou de service de garantie.
Information d’approbation et avis de compilation et de publication CET ÉQUIPEMENT A ÉTÉ CONÇU POUR FONCTIONNER AVEC UNE LIGNE RTPC ANALOGIQUE À DEUX FILS ÉQUIPÉE DU CONNECTEUR APPROPRIÉ. INFORMATION D’APPROBATION Brother signale qu'il est possible que ce produit ne fonctionne pas correctement dans un pays autre que celui où il a été acheté, et qu'aucune garantie n'est offerte dans le cas où ce produit serait utilisé sur les lignes de télécommunications publiques d'un autre pays.
Table des matières Section I 1 Généralités Informations générales 2 Comment utiliser la documentation .......................................................................2 Symboles et conventions utilisés dans la documentation ...............................2 Accès au Guide utilisateur - Logiciel et au Guide utilisateur - Réseau ..................3 Comment consulter la documentation .............................................................3 Accès au soutien Brother (Pour Windows®) ...............
Réglages du volume ............................................................................................ 31 Volume de la sonnerie...................................................................................31 Volume du bip sonore.................................................................................... 31 Volume du haut-parleur .................................................................................31 Heure d'été automatique ...................................................
Opérations d'envoi supplémentaires....................................................................46 Envoi de fax en utilisant plusieurs réglages ..................................................46 Contraste .......................................................................................................47 Modification de la résolution du fax ...............................................................47 Multitâche (Monochrome seulement) ........................................................
Téléphone et périphériques externes 67 Opérations vocales .............................................................................................. 67 Numérotation par tonalité ou par impulsions (Uniquement pour la Suisse) ..................................................................... 67 Mode Fax/Tél ................................................................................................ 67 Mode Fax/Tél en mode Économie d’énergie.................................................
10 Relève 89 Présentation de la relève .....................................................................................89 Réception par relève............................................................................................89 Configuration pour la réception par relève ....................................................89 Configuration pour la réception par relève avec code sécurisé.....................89 Configuration pour la réception par relève différée ................................
Pour commencer ...............................................................................................108 Passage en mode PhotoCapture ................................................................ 109 Impression d'images .......................................................................................... 109 Visualisation des photos.............................................................................. 109 Impression de l'index (miniatures) ...........................................
Section V Logiciel 14 Fonctions des logiciels et fonctions réseau 132 Section VI Appendices A Sécurité et réglementation 134 Choix d'un emplacement ...................................................................................134 Utilisation de l'appareil en toute sécurité ...........................................................135 Instructions de sécurité importantes............................................................139 IMPORTANT - Pour votre sécurité ................................
C Menu et fonctions 177 Programmation à l'écran....................................................................................177 Tableau des menus ..................................................................................... 177 Mémoire permanente .................................................................................. 177 Touches de mode et de menu ........................................................................... 177 Tableau des menus ...................................
x
Section I Généralités Informations générales Chargement du papier et des documents Configuration générale Fonctions de sécurité I 2 9 26 35
1 Informations générales Comment utiliser la documentation 1 Nous vous remercions d’avoir acheté un appareil Brother ! La lecture de la documentation vous aidera à tirer le meilleur parti de votre appareil. Symboles et conventions utilisés dans la documentation Les avertissements « Attention » signalent les procédures à suivre ou à éviter pour ne pas endommager l’appareil ou d'autres objets. Les icônes de risque électrique vous avertissent contre tout choc électrique possible.
Informations générales Accès au Guide utilisateur - Logiciel et au Guide utilisateur Réseau c 1 Le présent Guide de l'utilisateur ne contient pas toutes les informations relatives à l'appareil, telles que la façon d'utiliser les fonctions avancées de l'imprimante, du scanner, de PC-FAX et du réseau. Quand vous vous sentirez prêt à assimiler des informations plus détaillées sur ces opérations, lisez le Guide utilisateur Logiciel et le Guide utilisateur - Réseau qui figurent sur le CD-ROM.
Chapitre 1 Comment trouver les instructions de numérisation 1 Il y a plusieurs façons de numériser des documents. Vous pouvez trouver les instructions comme suit : Comment consulter la documentation (Pour Macintosh) a Allumez votre Macintosh. Insérez le CDROM Brother dans votre lecteur de CDROM. La fenêtre suivante s’affiche. (La fenêtre ci-dessous peut varier en fonction du modèle.) b Double-cliquez sur l’icône Documentation. c Double-cliquez sur le dossier de votre langue.
Informations générales Comment trouver les instructions de numérisation 1 Il y a plusieurs façons de numériser des documents. Vous pouvez trouver les instructions comme suit : Accès au soutien Brother (Pour Windows®) 1 1 Vous pouvez trouver tous les contacts dont vous aurez besoin, comme le soutien Web (Brother Solutions Center). Guide utilisateur - Logiciel Numérisation ControlCenter2 Cliquez sur Soutien Brother dans le menu principal.
Chapitre 1 MFC-6490CW Vue d'ensemble du panneau de commande 1 Les MFC-5890CN, MFC-5895CW et MFC-6490CW comportent les mêmes touches sur le panneau de commande. 10 9 Mé Mém. Fax 12:45 21.12.2009 1 2 Remarque La plupart des illustrations dans ce Guide de l'utilisateur montrent le MFC-6490CW. 1 2 6 Touches de fax et de téléphone: Fax Preview Permet de prévisualiser des fax entrants et sortants sur l'écran LCD.
Informations générales 1 8 7 6 Mém. m. Fax 12:45 21.12.2009 3 5 d ou c Appuyez sur ces touches pour parcourir un menu vers l'arrière ou vers l'avant pour accéder à une sélection particulière. Vous pouvez également appuyer sur ces touches pour sélectionner des options. a ou b Appuyez sur ces touches pour faire défiler les menus et les options. Menu Permet d'accéder au menu principal. OK Permet de choisir un réglage.
Chapitre 1 Écran LCD indications 1 L'écran LCD affiche l'état actuel de l'appareil lorsque celui-ci ne travaille pas. 1 2 3 4 Mém. m. Fax Opérations de base Les étapes suivantes décrivent comment modifier un réglage de l'appareil. Dans cet exemple, le réglage de temporisation de mode a été changé de 2 minutes à 30 secondes. a b 12:45 0 2 3 4 5 Max État de la mémoire Permet de voir la mémoire disponible de l'appareil. Témoin d'encre Permet de connaître la quantité d'encre disponible.
2 Chargement du papier et des documents Chargement du papier et d'autres supports d'impression 2 Remarque 2 Remarque • Pour le papier au format A3, Legal ou Ledger, appuyez et maintenez enfoncé le bouton de libération du dispositif de guidage universel (1) en faisant glisser la partie avant du bac à papier. (MFC-6490CW seulement) • Pour le bac 2, voir Chargement du papier dans le bac à papier 2 (MFC-6490CW seulement) à la page 12. • Si le bac utilisé pour le mode Fax est réglé sur Sélect. auto.
Chapitre 2 c Sans forcer, enfoncez et faites coulisser les guides papier latéraux (1) puis le guide de longueur papier (2) avec les deux mains en fonction du format de papier. Assurez-vous que les marques triangulaires (3) figurant sur les guides papier latéraux (1) et le guide de longueur papier (2) s'alignent avec la marque correspondant au format de papier que vous utilisez. 1 d Remarque Veillez toujours à ne pas utiliser du papier gondolé.
Chargement du papier et des documents f Sans forcer, ajustez les guides papier latéraux avec les deux mains en fonction du format de papier. Vérifiez que les guides papier latéraux touchent les bords du papier. h Poussez lentement le bac à papier entièrement dans l’appareil. 2 AVERTISSEMENT (MFC-6490CW seulement) Remarque Prenez soin de ne pas pousser le papier trop loin ; il pourrait remonter à l’arrière du bac et causer des problèmes d'entraînement du papier.
Chapitre 2 Remarque Lorsque vous diminuez le bac 1, retirez le papier du bac. Puis diminuez le bac en appuyant sur le bouton de libération du dispositif de guidage universel (1). Ajustez le guide de longueur papier (2) en fonction du format de papier que vous allez utiliser. Insérez ensuite le papier dans le bac. Chargement du papier dans le bac à papier 2 (MFC-6490CW seulement) 2 Remarque Le bac 2 accepte uniquement les formats de papier ordinaire A3, A4, Ledger, Letter, Legal ou Executive.
Chargement du papier et des documents c Sans forcer, enfoncez et faites coulisser les guides papier latéraux (1) puis le guide de longueur papier (2) avec les deux mains en fonction du format de papier. Assurez-vous que les marques triangulaires (3) figurant sur les guides papier latéraux (1) et le guide de longueur papier (2) s'alignent avec la marque correspondant au format de papier que vous utilisez.
Chapitre 2 e Sans forcer, insérez le papier dans le bac à papier avec la face d'impression en bas et le bord supérieur en premier. Vérifiez que le papier repose à plat dans le bac, sous la marque maximum pour le papier (1). 1 f Sans forcer, ajustez les guides papier latéraux avec les deux mains en fonction du format de papier. Vérifiez que les guides papiers latéraux touchent les bords du papier.
Chargement du papier et des documents j Appuyez sur le bouton de libération (1) et maintenez-le enfoncé en faisant glisser la partie avant du bac à papier. l Fermez le couvercle du bac à papier et poussez lentement le bac à papier dans l'appareil. Retirez le support papier (1) jusqu'à entendre le déclic et dépliez le volet du support papier (2).
Chapitre 2 Chargement des enveloppes et des cartes postales À propos des enveloppes Utilisez des enveloppes dont le poids est compris entre 80 et 95 g/m2. Certaines enveloppes nécessitent que la marge soit réglée dans l’application. Vérifiez que vous effectuez d’abord une impression d’essai avant d'imprimer un grand nombre d'enveloppes. ATTENTION N’utilisez PAS les types d’enveloppe suivants car ils risquent de créer des problèmes d'entraînement du papier : • Enveloppes à soufflets.
Chargement du papier et des documents b Insérez les enveloppes ou les cartes postales dans le bac à papier, côté adresse vers le bas et le bord avant (partie supérieure des enveloppes) en premier. Des deux mains, appuyez doucement et faites glisser les guides papier latéraux (1) et le guide de longueur papier (2) en fonction du format des enveloppes ou des cartes postales.
Chapitre 2 Zone imprimable 2 La zone imprimable dépend des réglages dans l’application utilisée. Les figures ci-dessous montrent les zones non imprimables sur les feuilles individuelles et sur les enveloppes. L’appareil peut imprimer dans les parties sombres des feuilles individuelles quand la fonction d'impression Sans bordure est disponible et activée. (Voir Impression pour Windows® ou Impression et télécopie pour Macintosh dans le Guide utilisateur - Logiciel sur le CD-ROM.
Chargement du papier et des documents Papier et autres supports d'impression acceptables La qualité d’impression peut dépendre du type de papier utilisé dans l’appareil. Pour obtenir la meilleure qualité d’impression en fonction des réglages choisis, il est essentiel que l’option Type de papier corresponde toujours au papier chargé. Vous pouvez utiliser du papier ordinaire, du papier jet d’encre (papier couché), du papier glacé, des transparents et des enveloppes.
Chapitre 2 Manipulation et utilisation des supports d'impression Volume de papier du bac à papier 2 Conservez le papier dans son emballage d’origine et gardez-le fermé. Conservez le papier à plat et à l’abri de l’humidité, de la lumière directe du soleil et de la chaleur. Évitez de toucher le côté brillant (couché) du papier photo. Chargez le papier photo face brillante vers le bas.
Chargement du papier et des documents Sélection du support d'impression approprié 2 Type de papier et format du papier pour chaque opération Type de papier Format du papier Feuille individuelle Ledger Cartes Enveloppes 2 2 Utilisation Fax Copie Photo Capture Imprimante 279,4 431,8 mm (11 17 po) Oui Oui Oui Oui A3 297 420 mm (11,7 16,5 po) Oui Oui Oui Oui Letter 215,9 279,4 mm (8 1/2 11 po) Oui Oui Oui Oui A4 210 297 mm (8,3 11,7 po) Oui Oui Oui Oui Legal
Chapitre 2 Poids, épaisseur et volume du papier 2 Type de papier Poids Épaisseur Nombre de feuilles Feuille individuelle Papier ordinaire 64 à 120 g/m2 0,08 à 0,15 mm 150 1 (Bac 2) Papier ordinaire (MFC-6490CW) 64 à 105 g/m2 0,08 à 0,15 mm 250 2 Papier jet d’encre 64 à 200 g/m2 0,08 à 0,25 mm 20 Papier glacé Jusqu'à 220 g/m2 Jusqu'à 0,25 mm 20 Carte photo Jusqu'à 220 g/m2 Jusqu'à 0,25 mm 20 Fiche Jusqu'à 120 g/m2 Jusqu'à 0,15 mm 30 Carte postale Jusqu'à 200 g/m2 Jusqu'à 0,2
Chargement du papier et des documents Chargement des documents Comment charger des documents NE tirez PAS sur le document lorsqu'il est en cours d'entraînement. 2 Le chargeur ADF peut contenir jusqu’à 50 pages qu’il entraîne une à la fois. Utilisez du papier standard 80 g/m2 et effeuillez toujours les feuilles avant de les placer dans le chargeur ADF.
Chapitre 2 d Comment charger les documents Placez vos documents, face vers le haut, bord supérieur en premier, dans le chargeur ADF jusqu'à ce qu'ils entrent en contact avec le rouleau d'alimentation. Remarque Pour pouvoir utiliser la vitre du scanner, le chargeur ADF doit être vide. Remarque (MFC-6490CW seulement) Insérez les documents au format A4/Letter bord court en premier. a b Soulevez le capot document. c Refermez le capot document.
Chargement du papier et des documents Zone numérisable 2 La zone numérisable dépend des réglages dans l’application utilisée. Les figures cidessous montrent la zone non numérisable.
3 Configuration générale Mode Économie d’énergie Pour maintenir la qualité d'impression, prolonger la durée de vie de la tête d'impression et économiser au mieux la cartouche d'encre, l'appareil doit rester branché au secteur à tous moments. Vous pouvez placer l'appareil en mode Économie d'énergie en appuyant sur la touche Power Save. Vous pouvez recevoir des appels téléphoniques même si l'appareil est placé en mode Économie d'énergie.
Configuration générale Réglage économie d’énergie Vous pouvez personnaliser la touche Power Save de l’appareil. Le réglage par défaut est Récept. fax:On. Votre appareil peut recevoir des fax ou des appels même quand il est en mode Économie d'énergie. Si vous souhaitez que votre appareil ne reçoive pas de fax ou d’appels, paramétrez ce réglage sur Récept. fax:Off. a b Appuyez sur Menu. Appuyez sur a ou sur b pour sélectionner Param. général. Appuyez sur OK.
Chapitre 3 Réglages de papier Format du papier Format du papier et type de papier (MFC-5890CN et MFC-5895CW) 3 Type de papier Pour obtenir la meilleure qualité d’impression, réglez l’appareil suivant le type de papier que vous utilisez. a b c d e Appuyez sur Menu. Appuyez sur Menu. Appuyez sur a ou sur b pour sélectionner Param. général. Appuyez sur OK. c Appuyez sur a ou sur b pour sélectionner Type papier. Appuyez sur a ou sur b pour sélectionner Format papier.
Configuration générale a b c d e Appuyez sur Menu. Appuyez sur a ou sur b pour sélectionner Param. général. Appuyez sur OK. Appuyez sur a ou sur b pour sélectionner Paramètre bac. Appuyez sur OK. Appuyez sur a ou sur b pour sélectionner Bac 1 ou Bac 2. Appuyez sur OK. Effectuez l'une des actions suivantes : Si vous avez choisi Bac 1, appuyez sur d ou sur c pour sélectionner Papier normal, Pap.jet d’encre, Brother BP71, Autre - Glacé ou Transparent. Appuyez sur OK.
Chapitre 3 Utilisation du bac en mode Fax (MFC-6490CW seulement) Vous pouvez changer le bac par défaut que l'appareil utilisera pour l'impression des fax reçus. Sélect. auto. permettra à votre appareil de prélever le papier dans le bac 1 en premier, ou dans le bac 2 si : Le bac 1 ne contient plus de papier. Le bac 2 est réglé sur un format du papier différent qui convient davantage aux fax reçus.
Configuration générale Réglages du volume Volume de la sonnerie 3 3 Vous pouvez choisir l'un des niveaux du volume de la sonnerie compris entre Haut et Off. 3 Appuyez sur Menu. c Appuyez sur a ou sur b pour sélectionner Volume. Appuyez sur OK. d Appuyez sur a ou sur b pour sélectionner Bip sonore. Appuyez sur Menu. e Appuyez sur a ou sur b pour sélectionner Param. général. Appuyez sur OK. Appuyez sur d ou sur c pour sélectionner Bas, Moyen, Haut ou Off. Appuyez sur OK.
Chapitre 3 Heure d'été automatique Vous avez la possibilité de configurer l’appareil de sorte qu’il passe automatiquement à l'heure d'été. Son horloge sera réinitialisée automatiquement de façon à avancer d’une heure au printemps et à revenir en arrière d’une heure en automne. Assurez-vous que vous avez réglé la date et l’heure exactes lors du réglage Date & heure. a b Vous pouvez sélectionner le temps pendant lequel l'appareil reste inactif (entre 1 et 60 minutes) avant de passer en mode Veille.
Configuration générale Écran LCD Contraste de l'écran LCD Vous pouvez ajuster le contraste de l’écran LCD pour obtenir un affichage plus net et plus vif. Si vous avez des difficultés à lire l’écran LCD, essayez de changer les réglages de contraste. 3 3 Réglage de la luminosité du rétroéclairage 3 Si vous éprouvez des difficultés à lire l'écran LCD, essayez de modifier le réglage de luminosité. a b Appuyez sur Menu. Appuyez sur a ou sur b pour sélectionner Param. général. Appuyez sur OK.
Chapitre 3 Réglage de la temporisation de l'atténuation du rétroéclairage Vous pouvez régler le délai pendant lequel le rétroéclairage de l'écran LCD reste allumé après la dernière action sur une touche. a b Appuyez sur Menu. c Appuyez sur a ou sur b pour sélectionner Réglage LCD. Appuyez sur OK. d Appuyez sur a ou sur b pour sélectionner Tempor. attén. e Appuyez sur d ou sur c pour sélectionner 10Secs, 20Secs, 30Secs ou Off. Appuyez sur OK. f 34 Appuyez sur a ou sur b pour sélectionner Param.
4 Fonctions de sécurité Verrouillage sécurisé des fonctions La fonction Verrouillage sécurisé des fonctions permet de restreindre l'accès public à certaines fonctions de l'appareil (Fax, Copie, Scan, Impression 1 et PCC). Elle permet également aux utilisateurs de modifier les réglages par défaut de l'appareil en limitant l'accès aux réglages du menu. Pour pouvoir utiliser les fonctions de sécurité, vous devez d'abord saisir un mot de passe d'administrateur.
Chapitre 4 Modification du mot de passe 4 e Saisissez le mot de passe d'administrateur. Appuyez sur OK. a b Appuyez sur Menu. Appuyez sur a ou sur b pour sélectionner Param. général. Appuyez sur OK. f Appuyez sur a ou sur b pour sélectionner Public. Appuyez sur OK. c Appuyez sur a ou sur b pour sélectionner Verr.de fonct. Appuyez sur OK. g Effectuez l'une des actions suivantes : d Appuyez sur a ou sur b pour sélectionner Entrer Mot Passe. Appuyez sur OK.
Fonctions de sécurité i Vous pouvez configurer des utilisateurs avec des restrictions et un mot de passe. Vous pouvez configurer jusqu'à 20 utilisateurs restreints. Appuyez sur d ou sur c pour sélectionner Activer ou Désactiver pour Fax Tx. Appuyez sur OK. Lorsque vous avez réglé Fax Tx, appuyez sur a ou sur b et répétez cette étape pour Fax Rx, Copie(couleur), Copie (N&B)et Scan. j a b Appuyez sur a ou sur b pour sélectionner Quitter. Appuyez sur OK. Appuyez sur a ou sur b pour sélectionner Param.
Chapitre 4 g h i j Appuyez sur a ou sur b pour sélectionner Changer. Appuyez sur OK. Effectuez l'une des actions suivantes : Réinitialisation des utilisateurs restreints existants Vous pouvez réinitialiser les utilisateurs restreints un par un. Si vous souhaitez modifier le nom, appuyez sur Clear/Back, puis saisissez le nouveau nom. (Voir Saisie de texte à la page 203.) Appuyez sur OK. a b Appuyez sur Menu. Pour ne pas modifier le nom, appuyez sur OK.
Fonctions de sécurité Activation/Désactivation de la fonction Verrouillage sécurisé des fonctions Commutation des utilisateurs 4 Remarque Si vous entrez un mot de passe incorrect, l'écran LCD affiche Erreur m.passe. Ressaisissez le mot de passe correct. Activation de la fonction Verrouillage sécurisé des fonctions a b c d e Appuyez sur a ou sur b pour sélectionner Param. général. Appuyez sur OK. c Maintenez la touche Shift enfoncée lorsque vous appuyez sur l. Ou, appuyez sur Menu.
Chapitre 4 Réinitialisation de tous les utilisateurs Vous pouvez réinitialiser tous les réglages et tous les mots de passe de l'utilisateur public et de tous les utilisateurs restreints. a b Appuyez sur Menu. c Appuyez sur a ou sur b pour sélectionner Verr.de fonct. Appuyez sur OK. d Appuyez sur a ou sur b pour sélectionner Réinit ts les utilis. Appuyez sur OK. e Saisissez votre mot de passe d'administrateur à quatre chiffres. Appuyez sur OK. f g Appuyez sur 1 pour réinitialiser.
Section II Fax 42 Réception d’un fax 51 Téléphone et périphériques externes 67 Numérotation et enregistrement des numéros 74 Impression de rapports 87 Relève 89 Envoi d'un fax II
5 Envoi d'un fax Entrer en mode fax Lorsque vous souhaitez envoyer un fax ou modifier les réglages d'envoi ou de réception de fax, appuyez sur la touche (Fax) pour l'allumer en bleu. 5 5 Envoi de fax depuis le chargeur ADF a Appuyez sur b Placez le document face vers le haut dans le chargeur ADF. (Voir Utilisation du chargeur ADF à la page 23.) c Composez le numéro de fax en utilisant le pavé numérique, une monotouche, un numéro abrégé ou la fonction Recherche.
Envoi d'un fax Envoi d'un fax depuis la vitre du scanner e Pour envoyer une seule page, appuyez sur 2 pour sélectionner Non(Env.) (ou appuyez sur Mono Start à nouveau). 5 Vous pouvez utiliser la vitre du scanner pour faxer les pages d’un livre une à la fois. Les documents peuvent être au format A3 maximum pour MFC-6490CW et au format A4 maximum pour MFC-5890CN et MFC-5895CW. L’appareil débute l'envoi du document.
Chapitre 5 Réglage du format de la vitre du scanner pour la télécopie (MFC-6490CW seulement) 5 Pour faxer un document au format A3, Letter, Legal ou Ledger sur la vitre du scanner, vous devez modifier le réglage Format de numérisation de la vitre. a b Appuyez sur c Appuyez sur d ou sur c pour sélectionner A4, A3, Letter, Legal ou Ledger. a Appuyez sur b c Chargez le document. d Appuyez sur Fax Preview. L'appareil commence à numériser le document et le fax sortant apparaît sur l'écran LCD.
Envoi d'un fax Diffusion (Monochrome seulement) La diffusion est l’envoi automatique d’un même fax à plusieurs numéros de fax. Dans la même diffusion, vous pouvez inclure des numéros de groupes, de monotouche et des numéros abrégés et jusqu’à 50 numéros composés manuellement. Une fois la diffusion terminée, l'appareil imprime un rapport de diffusion. a Appuyez sur b c Chargez votre document. d (Fax). Appuyez sur a ou sur b pour sélectionner Diffusion. Appuyez sur OK.
Chapitre 5 Annulation d’une diffusion en cours d’exécution a b c d e f g h 5 Appuyez sur Menu. Appuyez sur a ou sur b pour sélectionner Fax. Appuyez sur OK. Appuyez sur a ou sur b pour sélectionner Jobs attente. Appuyez sur OK. L'écran LCD montre le numéro de fax en train d'être composé ainsi que le numéro de tâche de diffusion.
Envoi d'un fax Contraste 5 Il y a quatre réglages de résolution différents pour les fax monochromes et deux réglages de résolution pour les fax couleur. Si votre document est très clair ou très foncé, vous pouvez, si vous le souhaitez, changer le contraste. Pour la plupart des documents, le réglage par défaut Auto peut être utilisé. Il choisit automatiquement le contraste qui convient à votre document. Utilisez Clair pour envoyer un document clair. Utilisez Foncé pour envoyer un document foncé.
Chapitre 5 Multitâche (Monochrome seulement) 5 Vous pouvez composer un numéro et commencer à numériser le fax dans la mémoire, même lorsque l’appareil est en cours d'envoi à partir de la mémoire, de réception d'un fax ou d'impression des données du PC. L’écran LCD affiche le nouveau numéro de tâche et la mémoire disponible. Il se peut parfois que vous souhaitiez envoyer un document important immédiatement, sans avoir à attendre la transmission depuis la mémoire. Vous pouvez activer TX immédiat.
Envoi d'un fax c Appuyez sur d ou sur c pour sélectionner On. Appuyez sur OK. Pendant la journée, vous pouvez enregistrer un maximum de 50 fax dans la mémoire pour les envoyer dans les 24 heures qui suivent. Ces fax seront envoyés à l’heure de la journée que vous programmez à l’étape e. d Appuyez sur Stop/Exit. a Appuyez sur b c Chargez votre document. Vous pouvez vérifier les tâches qui se trouvent toujours en attente d'envoi dans la mémoire et annuler une tâche.
Chapitre 5 Configuration de vos modifications comme les nouveaux réglages par défaut Envoi d'un fax manuellement 5 Vous pouvez sauvegarder les réglages de fax de Résolution fax, Contraste, Format scan vitre et TX immédiat utilisés le plus souvent en les définissant comme réglages par défaut. Ces réglages restent opérationnels tant qu'ils ne sont pas modifiés. a Appuyez sur b Appuyez sur a ou sur b pour sélectionner l'option de menu que vous souhaitez modifier.
6 Réception d’un fax 6 Modes de réception 6 Vous devez choisir un mode de réception en fonction des périphériques externes et des services téléphoniques que vous avez sur votre ligne. Choix du mode de réception 6 Par défaut, votre appareil recevra automatiquement tous les fax qui lui sont envoyés. Le schéma suivant vous aidera à choisir le mode correct. Pour plus d’informations concernant les modes de réception, voir Utilisation des modes de réception à la page 52.
Chapitre 6 Utilisation des modes de réception Manuel 6 Certains modes de réception permettent de répondre automatiquement (Fax et Fax/Tél). Vous souhaitez peut-être changer la longueur de sonnerie avant d’utiliser ces modes. (Voir Longueur de sonnerie à la page 53.) Fax seulement 6 En mode Fax seulement, l'appareil répond automatiquement à tous les appels comme s'il s'agissait d'appels de fax.
Réception d’un fax Réglages du mode de réception Longueur de sonnerie 6 6 La fonction Longueur de sonnerie permet de déterminer le nombre de sonneries émises par l’appareil avant qu'il ne réponde en mode Fax ou en mode Fax/Tél. Si vous avez des téléphones supplémentaires ou externes qui partagent la même ligne que l'appareil, sélectionnez le nombre maximum de sonneries. (Voir Fonctionnement avec des téléphones supplémentaires à la page 72 et Détection de fax à la page 54.) a b c Appuyez sur Menu.
Chapitre 6 Détection de fax Si la fonction Détection de fax est réglée sur On : 6 Si vous êtes près de l’appareil et que vous répondez à un appel de fax en décrochant le combiné, appuyez sur Mono Start ou sur Colour Start, puis appuyez sur 2 pour recevoir le fax. Si vous avez pris l’appel sur un téléphone supplémentaire, appuyez sur l 5 1. (Voir Fonctionnement avec des téléphones supplémentaires à la page 72.
Réception d’un fax Opérations de réception supplémentaires Impression d'un fax entrant réduit 6 6 Si vous sélectionnez On, l’appareil réduit automatiquement chaque page d’un fax entrant pour que celui-ci puisse tenir sur une feuille au format A4, Letter ou Legal. L’appareil calcule le taux de réduction en se servant du format de page du fax et de votre réglage du format du papier.
Chapitre 6 Réglage de la priorité de réception 6 Si un fax A3 couleur est envoyé à votre appareil, celui-ci recevra soit un fax A3 mono, soit un fax A4 couleur, en fonction du réglage Priorité de réception. Si vous sélectionnez N&B(A3 max.), vous recevrez un fax A3 monochrome. Si vous sélectionnez Couleur(A4 max.), vous recevrez un fax A4 couleur. Remarque Le réglage par défaut est N&B(A3 max.), de sorte que l'appareil ne peut pas recevoir de fax A4 couleur par défaut.
Réception d’un fax Impression d'un fax à partir de la mémoire 6 Si vous avez sélectionné la fonction Mémorisation de fax, vous pouvez tout de même imprimer un fax à partir de la mémoire lorsque vous êtes sur l’appareil. Si vous avez sélectionné Fax Preview, voir la section Prévisualisation de fax (Monochrome seulement) à la page 61. a b Réadressage de fax Mémorisation de fax Réception PC-Fax Appuyez sur a ou sur b pour sélectionner Fax. Appuyez sur OK.
Chapitre 6 Réadressage de fax Lorsque vous sélectionnez la fonction Réadressage de fax, votre appareil enregistre le fax reçu dans la mémoire. Puis l’appareil compose le numéro de fax programmé et réadresse le fax. a b Appuyez sur Menu. Appuyez sur a ou sur b pour sélectionner Fax. Appuyez sur OK. 6 Mémorisation de fax Si vous sélectionnez la fonction Mémorisation de fax, votre appareil enregistre le fax reçu dans la mémoire.
Réception d’un fax Réception PC-FAX 6 Si vous activez la fonction Réception PC-FAX, votre appareil enregistrera les fax reçus dans la mémoire et les enverra automatiquement à votre ordinateur. Vous pouvez utiliser votre ordinateur pour afficher et enregistrer ces fax. Même si vous avez mis votre ordinateur hors tension (la nuit ou le weekend, par exemple), votre appareil recevra et enregistrera vos fax dans sa mémoire.
Chapitre 6 Modification de l'ordinateur de destination a b Appuyez sur Menu. c 6 Désactivation des opérations de réception dans la mémoire a b Appuyez sur Menu. Appuyez sur a ou sur b pour sélectionner Param. RC. Appuyez sur OK. c Appuyez sur a ou sur b pour sélectionner Param. RC. Appuyez sur OK. d Appuyez sur a ou sur b pour sélectionner Réception mém. Appuyez sur OK. d Appuyez sur a ou sur b pour sélectionner Réception mém. Appuyez sur OK.
Réception d’un fax Modification des opérations de réception dans la mémoire 6 Si des fax reçus restent dans la mémoire de votre appareil lorsque vous modifiez les opérations de réception dans la mémoire, l'écran LCD vous pose les questions suivantes : Effac. tous doc? Oui i Appuyez sur 1 Non i Appuyez sur 2 Imprim.tous fax? Oui i Appuyez sur 1 Non i Appuyez sur 2 • Si vous appuyez sur 1, les fax dans la mémoire seront effacés ou imprimés avant le changement du réglage.
Chapitre 6 Utilisation de la fonction Prévisualisation de fax Lorsque vous recevez un fax, un message contextuel s'affiche sur l'écran LCD. (Par exemple : Nouv. fax: 02) a 6 Une fois le fax affiché, vous pouvez effectuer les opérations suivantes à l'aide des touches du panneau de commande. Touche Permet d'agrandir le fax. Appuyez sur Fax Preview. La liste des nouveaux fax s'affiche.
Réception d’un fax Comment effacer tous les fax de la liste a b c c Appuyez sur a ou sur b pour sélectionner Effacer tout. Appuyez sur OK. Appuyez sur 1 pour confirmer. a b c d Réglage d'un code d'accès à distance Appuyez sur Stop/Exit. 6 Appuyez sur Fax Preview. Appuyez sur a ou sur b pour sélectionner Imprimer tout. Appuyez sur OK. Appuyez sur Stop/Exit. Modification des réglages afin de désactiver la fonction Prévisualisation de fax 6 Appuyez sur 1 pour sélectionner Oui.
Chapitre 6 Utilisation de votre code d'accès à distance a Composez votre numéro de fax à partir d'un téléphone ou d'un autre télécopieur à touches. b Dès que votre appareil répond, saisissez immédiatement votre code d'accès à distance (3 chiffres suivis de ). c L'appareil indique s'il a reçu des messages : 1 bip sonore long — Fax Aucun bip sonore — Pas de message d Lorsque l'appareil émet deux bips sonores courts, saisissez une commande.
Réception d’un fax Commandes de fax à distance 6 Utilisez les commandes ci-dessous pour accéder aux fonctions quand vous n'êtes pas à proximité de l'appareil. Lorsque vous appelez l'appareil et saisissez votre code d'accès à distance (3 chiffres suivis de ), le système émet deux bips sonores courts pour vous inviter à saisir une commande à distance.
Chapitre 6 Extraction des fax Vous pouvez appeler votre appareil à partir de n'importe quel téléphone à touches et demander l'envoi de vos fax sur un appareil. Pour utiliser cette fonction, vous devez activer la fonction Mémorisation de fax. a Composez votre numéro de fax. b Dès que votre appareil répond, saisissez immédiatement votre code d'accès à distance (3 chiffres suivis de ). Si vous entendez un bip sonore long, vous avez des messages.
7 Téléphone et périphériques externes Opérations vocales 7 Vous pouvez réaliser des appels vocaux sur un téléphone supplémentaire ou externe en numérotant manuellement ou en utilisant les numéros abrégés. Numérotation par tonalité ou par impulsions (Uniquement pour la Suisse) Décrochez le combiné du téléphone externe. b Appuyez sur # sur le panneau de commande de l’appareil. Les chiffres composés après cela transmettent des signaux à tonalités.
Chapitre 7 Services téléphoniques 7 Votre appareil prend en charge les services téléphoniques d’identification de l'appelant offerts par certaines compagnies de téléphone. Si votre ligne téléphonique assure les fonctions Messagerie vocale, Mise en attente des appels, Mise en attente des appels/Identification de l'appelant, les services de répondeur, les systèmes d’alarme ou d'autres fonctions personnalisées, ceci peut perturber le fonctionnement de votre appareil.
Téléphone et périphériques externes Réglage du type de ligne téléphonique Si vous branchez l’appareil sur une ligne avec PBX ou RNIS pour envoyer et recevoir des fax, vous devez changer le type de ligne téléphonique en effectuant les étapes suivantes. a b Appuyez sur Menu. Appuyez sur a ou sur b pour sélectionner Param. système. Appuyez sur OK. c Appuyez sur a ou sur b pour sélectionner Type ligne tél. d Appuyez sur d ou sur c pour sélectionner PBX, ISDN (ou Normal). Appuyez sur OK.
Chapitre 7 Branchement d'un RÉP (répondeur téléphonique) externe 1 7 Vous pouvez, si vous le souhaitez, brancher un répondeur externe. Toutefois, quand un RÉP externe et l’appareil partagent la même ligne téléphonique, le RÉP répond à tous les appels et l’appareil essaie de « détecter » une tonalité d'appel de fax (CNG). Si une telle tonalité est détectée, l'appareil intercepte l'appel et reçoit le fax.
Téléphone et périphériques externes Branchements 7 Nous vous recommandons de commencer votre OGM par une période de silence de 5 secondes parce que l'appareil ne peut pas détecter les tonalités de fax au-dessus d'une voix forte. Vous pouvez essayer de ne pas insérer cette pause, mais en cas de problèmes de réception, vous devrez réenregistrer l'OGM avec la pause en question. Le RÉP externe doit être branché comme indiqué dans l’illustration précédente.
Chapitre 7 Téléphones externes et supplémentaires Branchement d'un téléphone externe ou supplémentaire Vous pouvez brancher un téléphone séparé à votre appareil comme illustré sur le schéma ci-dessous. 1 3 2 Fonctionnement avec des téléphones supplémentaires 7 Si vous répondez à un appel de fax sur un téléphone supplémentaire ou sur un téléphone externe, vous pouvez permettre à l'appareil de prendre l'appel en utilisant le code d'activation à distance.
Téléphone et périphériques externes Utilisation des codes à distance Code d'activation à distance Modification des codes à distance 7 7 Si vous répondez à un appel de fax sur un téléphone supplémentaire, vous pouvez demander à l'appareil de le recevoir en composant le code d'activation à distance l 5 1. Attendez la tonalité stridente, puis raccrochez le combiné. (Voir Détection de fax à la page 54.) Votre correspondant devra appuyer sur Start pour envoyer le fax.
8 Numérotation et enregistrement des numéros Comment composer un numéro Numérotation manuelle Numérotation abrégée 8 a Appuyez sur (Répertoire). 8 Composez tous les chiffres du numéro de fax ou de téléphone. Vous pouvez également sélectionner Répertoire en appuyant sur (Fax). Numérotation par monotouche Votre appareil comporte 3 touches monotouche permettant de mémoriser 6 numéros de fax ou de téléphone afin de les composer automatiquement. 8 b Appuyez sur a ou sur b pour sélectionner Recherche.
Numérotation et enregistrement des numéros Recherche Vous pouvez rechercher des noms enregistrés dans la mémoire des monotouches et des numéros abrégés. a Appuyez sur (Répertoire). Vous pouvez également sélectionner Répertoire en appuyant sur (Fax). b Appuyez sur a ou sur b pour sélectionner Recherche. Appuyez sur OK. c Appuyez sur a ou sur b pour sélectionner Ordre alphabétique ou Ordre numérique. Appuyez sur OK. Remarque • Appuyez sur l pour agrandir la taille de police de l'écran LCD.
Chapitre 8 Historique des appels sortants 8 Les 30 derniers numéros auxquels vous avez envoyé un fax sont mémorisés dans l'historique des appels sortants. Vous pouvez sélectionner un des ces numéros pour y envoyer un fax, l'ajouter aux numéros monotouche ou aux numéros abrégés, ou l'effacer de l'historique. a Appuyez sur Redial/Pause. Vous pouvez également sélectionner Appel sortant en appuyant sur (Fax). b Appuyez sur a ou sur b pour sélectionner le numéro souhaité. Appuyez sur OK.
Numérotation et enregistrement des numéros d Effectuez l'une des actions suivantes : Pour envoyer un fax, appuyez sur a ou sur b pour sélectionner Envoyer un fax. Appuyez sur OK. Appuyez sur Mono Start ou sur Colour Start. Si vous souhaitez enregistrer le numéro, appuyez sur a ou sur b pour sélectionner Aj. au répertoire. Appuyez sur OK. (Voir Enregistrement des numéros abrégés à partir des appels sortants à la page 81.) Appuyez sur a ou sur b pour sélectionner Effacer.
Chapitre 8 Enregistrement des numéros de composition par monotouche Votre appareil comporte 3 touches monotouche permettant de mémoriser 6 numéros de fax ou de téléphone afin de les composer automatiquement. Pour accéder aux numéros 4 à 6, maintenez Shift enfoncé lorsque vous appuyez sur la touche monotouche. a Appuyez sur la touche monotouche où vous souhaitez enregistrer le numéro. Appuyez sur 1 pour sélectionner Oui.
Numérotation et enregistrement des numéros d Appuyez sur a ou sur b pour sélectionner le numéro de composition par monotouche où vous souhaitez enregistrer le numéro. Appuyez sur OK. c Appuyez sur a ou sur b pour sélectionner le numéro que vous souhaitez enregistrer. Appuyez sur OK. d Appuyez sur a ou sur b pour sélectionner Aj. au répertoire. Appuyez sur OK. e Appuyez sur a ou sur b pour sélectionner l'emplacement pour monotouche à 2 chiffres que vous souhaitez utiliser pour enregistrer le numéro.
Chapitre 8 Enregistrement des numéros abrégés Vous pouvez enregistrer jusqu'à 80 (MFC-5890CN et MFC-5895CW) ou 100 (MFC-6490CW) emplacements de numéro abrégé à 2 chiffres avec un nom, et chaque nom peut disposer de deux numéros. Pour composer un numéro, vous n'aurez à appuyer que sur quelques touches (par exemple : (Répertoire), le numéro à deux chiffres et Mono Start ou Colour Start). a b c d Appuyez sur (Répertoire). Appuyez sur a ou sur b pour sélectionner Régler numéro abrégé. Appuyez sur OK.
Numérotation et enregistrement des numéros Enregistrement des numéros abrégés à partir des appels sortants g Saisissez le deuxième numéro de fax ou de téléphone (20 chiffres max.). 8 Vous pouvez également enregistrer des numéros abrégés à partir de l'historique des appels sortants. a b c d Appuyez sur Redial/Pause. Vous pouvez également sélectionner Appel sortant en appuyant sur (Fax). Appuyez sur a ou sur b pour sélectionner le nom ou le numéro que vous souhaitez enregistrer. Appuyez sur OK.
Chapitre 8 e Appuyez sur a ou sur b pour sélectionner l'emplacement pour numéro abrégé à 2 chiffres que vous souhaitez utiliser pour enregistrer le numéro. Appuyez sur OK. Modification du nom ou du numéro des numéros monotouche ou des numéros abrégés Remarque Vous pouvez modifier un nom ou un numéro de numéro monotouche ou de numéro abrégé déjà enregistré. Les numéros abrégés commencent par # (par exemple, # 0 2).
Numérotation et enregistrement des numéros e Effectuez l'une des actions suivantes : Si vous souhaitez changer le numéro, appuyez sur a ou sur b pour sélectionner Nom. Appuyez sur OK et saisissez le nom à l’aide du pavé numérique (16 caractères max.). Appuyez sur OK. (Voir Saisie de texte à la page 203.) Si vous ne souhaitez pas changer le nom, passez à l'étape f.
Chapitre 8 d Appuyez sur a ou sur b pour sélectionner l'emplacement pour numéro monotouche ou pour numéro abrégé à 2 chiffres que vous souhaitez ajouter au groupe. Appuyez sur OK. Modification d'un nom de groupe a b Appuyez sur Remarque c Appuyez sur a ou sur b pour sélectionner le nom de groupe que vous souhaitez modifier. Appuyez sur OK. d Appuyez sur a ou sur b pour sélectionner Changez nom de groupe. Appuyez sur OK. Les numéros abrégés commencent par #.
Numérotation et enregistrement des numéros Suppression d'un groupe a b Appuyez sur (Répertoire). Appuyez sur a ou sur b pour sélectionner le groupe que vous souhaitez supprimer. Appuyez sur OK. d Appuyez sur a ou sur b pour sélectionner Effacer. Appuyez sur OK. Appuyez sur 1 pour confirmer. e Appuyez sur Stop/Exit. Suppression d'un numéro d'un groupe c d e f Appuyez sur (Répertoire). Appuyez sur a ou sur b pour sélectionner Groupement. Appuyez sur OK.
Chapitre 8 e Appuyez sur OK pour sélectionner Envoyer un fax. f Appuyez sur a ou sur b pour sélectionner Répertoire. Appuyez sur OK. g Appuyez sur a ou sur b pour sélectionner Recherche. Appuyez sur OK. h Appuyez sur a ou b pour sélectionner Ordre numérique. Appuyez sur OK. i Appuyez sur a ou sur b pour sélectionner l02. Appuyez sur OK. j Appuyez sur OK pour sélectionner Envoyer un fax. k Appuyez sur Mono Start ou sur Colour Start. Vous composerez le « 555-7000 ».
9 Impression de rapports Rapports de fax Remarque 9 Si vous sélectionnez On+Image ou Off+Image, l'image n'apparaîtra sur le rapport de vérification de l'envoi que si la fonction Envoi en temps réel est désactivée. (Voir Envoi en temps réel à la page 48.) Vous devez configurer le rapport de vérification de l'envoi et la périodicité du journal à l'aide des touches Menu. Rapport de vérification de l'envoi 9 9 Vous pouvez utiliser le rapport de vérification de l'envoi comme preuve d'envoi d'un fax.
Chapitre 9 a b Appuyez sur Menu. Appuyez sur a ou sur b pour sélectionner Fax. Appuyez sur OK. c Appuyez sur a ou sur b pour sélectionner Param. rapport. Appuyez sur OK. d Appuyez sur a ou sur b pour sélectionner Périod.journal. e Appuyez sur d ou sur c pour sélectionner un intervalle. Appuyez sur OK. (Si vous choisissez 7 jours, l'écran LCD vous invite à choisir le jour qui marquera le début du décompte des 7 jours.
10 Relève Présentation de la relève 10 10 La relève vous permet de configurer votre appareil pour que des correspondants puissent recevoir les fax que vous leur envoyez, mais en payant la communication. Elle vous permet aussi d'appeler le télécopieur d'une autre personne et de recevoir un fax de sa part, à condition que vous payiez la communication. Pour pouvoir fonctionner, la fonction de relève doit être configurée sur les deux appareils. Les télécopieurs ne prennent pas tous en charge la relève.
Chapitre 10 Configuration pour la réception par relève différée 10 La fonction Relève différée permet de configurer l'appareil pour que la réception par relève commence ultérieurement. Vous ne pouvez configurer qu'une seule opération de relève différée. a b Appuyez sur (Fax). Appuyez sur a ou sur b pour sélectionner Relève RC. c Appuyez sur d ou sur c pour sélectionner Envoi différé. Appuyez sur OK. d Saisissez l'heure de début de relève souhaitée (au format 24 heures).
Relève f Effectuez l'une des actions suivantes : Appuyez sur a ou sur b pour sélectionner Ajoutez numéro et saisissez un numéro à l'aide du pavé numérique. Appuyez sur OK. Appuyez sur a ou sur b pour sélectionner Répertoire et OK. Appuyez sur a ou sur b pour sélectionner Ordre alphabétique ou Ordre numérique et OK. Appuyez sur a ou sur b pour sélectionner un numéro et OK. Remarque Les emplacements de composition par monotouche commencent par l. Les emplacements de numéros abrégés commencent par #.
Chapitre 10 g Si vous utilisez la vitre du scanner, l'écran LCD vous invite à sélectionner une des options. Appuyez sur 1 pour envoyer une autre page. Passez au point h. Appuyez sur 2 ou sur Mono Start pour envoyer le document. h 92 Placez la page suivante sur la vitre du scanner puis appuyez sur OK. Répétez les points g et h pour chaque page supplémentaire. Votre appareil enverra automatiquement le fax.
Section III Copie Copies de documents III 94
11 Copies de documents Comment faire des copies Passage en mode Copie Lorsque vous voulez faire une copie, appuyez sur (Copy) pour allumer la touche en bleu. Remarque 11 11 11 • Le réglage par défaut est le mode Fax. Vous pouvez changer la durée pendant laquelle l'appareil reste en mode Copie après la dernière opération de copie. (Voir Temporisation de mode à la page 27.) • Les fonctions Copie livre et Cop. filigrane sont prises en charge grâce à la technologie de Reallusion, Inc.
Copies de documents Réglages de copie 11 Vous pouvez modifier provisoirement les réglages de copie pour les copies multiples suivantes. Les réglages par défaut de l'appareil sont rétablis au bout de 1 minute ou si la fonction Temporisation de mode rétablit le mode Fax. (Voir Temporisation de mode à la page 27.) Si vous avez terminé de sélectionner les réglages, appuyez sur Mono Start ou sur Colour Start. Si vous voulez sélectionner d'autres réglages, appuyez sur a ou sur b.
Chapitre 11 Agrandissement ou réduction de l'image copiée 100% 11 198% 10x15cmiA4 186% 10x15cmiLTR Vous pouvez choisir le facteur d'agrandissement ou de réduction. Si vous sélectionnez Ajuster page, votre appareil ajustera automatiquement le format au format du papier défini. 97% LTRiA4 (MFC-5890CN et MFC-5895CW) Si vous utilisez ce réglage, servez-vous de la vitre du scanner. 69% A3iA4 (MFC-6490CW seulement), A4iA5 a b c d e f Appuyez sur (Copy). Chargez votre document.
Copies de documents Copies N en 1 ou poster (mise en page) 11 La fonction Copie N en 1 permet d'économiser du papier en copiant deux ou quatre pages sur une seule feuille. (MFC-6490CW) La fonction 1 en 2 copie une feuille de format A3 ou Ledger sur deux feuilles au format A4 ou Letter. Si vous utilisez ce réglage, servezvous de la vitre du scanner. a Appuyez sur b c d Chargez votre document.
Chapitre 11 g h i j Si vous ne souhaitez pas modifier de réglages supplémentaires, appuyez sur Mono Start ou sur Colour Start pour numériser la page. Si vous avez placé le document dans le chargeur ADF ou si vous réalisez un poster, l'appareil numérise les pages et commence l'impression. Si vous utilisez la vitre du scanner, passez à l'étape h. Une fois que l'appareil a numérisé la page, appuyez sur 1 pour numériser la page suivante. Placez la page suivante sur la vitre du scanner. Appuyez sur OK.
Copies de documents Tri des copies à l'aide du chargeur ADF Contraste 11 Vous pouvez trier les copies multiples. Les pages sont triées dans l'ordre 321, 321, 321, etc. a b c d e f Appuyez sur (Copy). Chargez votre document. Vous pouvez régler le contraste de la copie pour rendre une image plus nette et plus vive. a b c d Appuyez sur e Appuyez sur d ou sur c pour modifier le contraste. Appuyez sur OK.
Chapitre 11 Format du papier 11 Si vous copiez sur du papier d'un format différent du A4, vous devrez changer le réglage du format du papier. Vous ne pouvez effectuer des copies que sur du papier au format Ledger, A3, Letter, Legal, A4, A5 ou Photo 10 cm 15 cm. a b c d e f Appuyez sur Chargez votre document. Saisissez le nombre de copies souhaité. Appuyez sur a ou sur b pour sélectionner Format papier. Appuyez sur d ou sur c pour sélectionner A4, A5, A3, 10x15cm, Letter, Legal ou Ledger.
Copies de documents Copie de livre 11 La fonction Copie de livre permet de corriger les bordures foncées et l'inclinaison. Votre appareil peut corriger les données automatiquement ou vous pouvez apporter des corrections spécifiques. Si vous utilisez ce réglage, servez-vous de la vitre du scanner. a b c d e Appuyez sur (Copy). Chargez votre document. Saisissez le nombre de copies souhaité. Appuyez sur a ou sur b pour sélectionner Copie livre.
Chapitre 11 Utilisation des données d'une carte média ou d'un lecteur USB de mémoire Flash Utilisation d'un document papier numérisé comme filigrane a b c Appuyez sur Appuyez sur a ou sur b pour sélectionner Cop. filigrane. Appuyez sur OK. d Appuyez sur d ou sur c pour sélectionner On. e Appuyez sur d ou sur c pour sélectionner On. e f Appuyez sur a ou sur b pour sélectionner Paramètre actuel. Appuyez sur OK. Appuyez sur a ou sur b pour sélectionner Paramètre actuel. Appuyez sur OK.
Copies de documents Définition de vos modifications comme nouveaux réglages par défaut Message « Mémoire saturée » 11 11 Si le message Mémoire saturée s'affiche pendant la numérisation de documents, appuyez sur Stop/Exit pour annuler ou sur Mono Start ou Colour Start pour copier les pages numérisées. Vous pouvez sauvegarder les réglages de copie pour Qualité, Agrandir/Réduir, Sélection bac (MFC-6490CW seulement), Luminosité, Contraste, Mise en page ou Régl. inclin.
Chapitre 11 104
Section IV Impression directe de photos Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash 106 Impression de photos à partir d'un appareil photo 126 IV
12 Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash Opérations de PhotoCapture Center™ Impression depuis une carte mémoire ou un lecteur USB de mémoire Flash sans ordinateur 12 12 Même si l'appareil n'est pas raccordé à un ordinateur, vous pouvez imprimer des photos directement à partir du support de l'appareil photo numérique ou d'un lecteur USB de mémoire Flash. (Voir Impression d'images à la page 109.
Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash Veuillez prendre en compte le point suivant : Les adaptateurs ne sont pas fournis avec l'appareil. Prenez contact avec un fournisseur d'adaptateurs. La fonction PhotoCapture Center™ permet d'imprimer des photos numériques à partir d'un appareil photo numérique à haute résolution pour une impression de qualité photo.
Chapitre 12 Pour commencer Indications de la touche Photo Capture : 12 Insérez fermement une carte mémoire ou un lecteur USB de mémoire Flash dans la fente correcte. Le voyant Photo Capture est allumé, la carte mémoire ou le lecteur USB de mémoire Flash est inséré correctement.
Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash Impression d'images Passage en mode PhotoCapture 12 Une fois la carte mémoire insérée ou le lecteur USB de mémoire Flash inséré, appuyez sur la touche (Photo Capture) pour qu'elle s'allume en bleu et pour afficher les options de PhotoCapture sur l'écran LCD. L'écran LCD affiche : 12 Visualisation des photos 12 Vous pouvez prévisualiser vos photos sur l'écran LCD avant de les imprimer.
Chapitre 12 Impression de l'index (miniatures) d Effectuez l'une des actions suivantes : Appuyez sur a ou sur b pour sélectionner Type papier, puis appuyez sur d ou sur c pour sélectionner le type de papier que vous utilisez, Papier normal, Pap.jet d’encre, Brother BP71 ou Autre - Glacé. 12 PhotoCapture Center™ numérote les images (Nº1, Nº2, Nº3 et ainsi de suite). Appuyez sur OK.
Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash e Correction automatique Répétez l'étape d jusqu'à ce que vous ayez saisi les numéros d'image que vous souhaitez imprimer. Remarque • Vous pouvez saisir les numéros en une seule fois en utilisant la touche l pour la virgule ou la touche # pour le trait d'union. Par exemple, saisissez 1, l, 3, l, 6 pour imprimer les images N1, N3 et N6. Saisissez 1, #, 5 pour imprimer les images N1 à N5.
Chapitre 12 Amélioration de la couleur de peau 12 Amélioration du paysage 12 La fonction Amélioration de la couleur de peau fonctionne le mieux sur les photos de type portrait. Elle permet de détecter la couleur de la peau humaine sur les photos et d'ajuster l'image. La fonction Amélioration du paysage fonctionne le mieux sur les photos de type paysage. Elle permet d'approfondir les verts et les bleus de votre photo, ce qui rend le paysage plus net et plus vif.
Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash Élimination des yeux rouges 12 e Appuyez sur OK et sur a ou sur b pour augmenter ou diminuer le nombre de copies. f Effectuez l'une des actions suivantes. L'appareil détecte les yeux sur vos photos et tentera d'y éliminer les yeux rouges. Remarque Appuyez sur OK et modifiez les réglages d'impression. (Voir page 117.) Il existe certains cas où les yeux rouges ne peuvent pas être éliminés.
Chapitre 12 Sépia Vous pouvez convertir la couleur de votre photo à la teinte sépia. a Vérifiez que vous avez bien inséré une carte mémoire ou un lecteur USB de mémoire Flash dans la fente correcte. Appuyez sur (Photo Capture). b 12 Recherche par date Vous pouvez trouver vos photos en vous basant sur leur date. a Vérifiez que vous avez bien inséré une carte mémoire ou un lecteur USB de mémoire Flash dans la fente correcte. Appuyez sur (Photo Capture).
Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash Imprimer la totalité des photos Diaporama 12 12 Vous pouvez imprimer toutes les photos contenues dans votre carte mémoire ou dans votre lecteur USB de mémoire Flash. Vous pouvez visualiser toutes vos photos sur l'écran LCD grâce à la fonction Diaporama. Vous pouvez aussi sélectionner une photo pendant l'opération.
Chapitre 12 Centrage 12 Vous pouvez centrer votre photo et imprimer une partie de l'image. Remarque Si votre photo est très petite ou a des proportions irrégulières, il est possible que vous ne puissiez pas effectuer de centrage sur la photo. L'écran LCD affiche alors Image trop petite ou Image trop longue. a Vérifiez que vous avez bien inséré une carte mémoire ou un lecteur USB de mémoire Flash dans la fente correcte. Appuyez sur (Photo Capture). b Appuyez sur a ou sur b pour sélectionner Centrage.
Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash PhotoCapture Center™ réglages d'impression 12 Vous pouvez modifier les réglages d'impression provisoirement. Les réglages par défaut de l'appareil sont rétablis au bout de 3 minutes ou si la fonction Temporisation de mode rétablit le mode Fax. (Voir Temporisation de mode à la page 27.) Remarque Vous pouvez mémoriser les réglages d'impression les plus utilisés en les définissant comme réglages par défaut.
Chapitre 12 Choix du menu Rehauss. coul. Options 1 On/Off Options 2 — Page 120 (Non disponible lorsque Effets photo est sélectionné) Balance blancs Recadrer Sans bordure Impress. date Quitter On/Off On/Off On/Off — — — 121 121 121 (Pas disponible pour l'impression DPOF) Régl.nouv.défaut Mise zéro usine Oui/Non Oui/Non — — 122 122 Netteté Densité coul. Vitesse et qualité d'impression a b c 118 Appuyez sur a ou sur b pour sélectionner Qualité impr.
Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash Format de papier et d'impression a Appuyez sur a ou sur b pour sélectionner Format papier. b Appuyez sur d ou sur c pour sélectionner le format de papier que vous utilisez, 10x15cm, 13x18cm, A4, A3, Letter ou Ledger. Appuyez sur OK. c Si vous choisissez le format A4 ou Letter, appuyez sur d ou c pour sélectionner le format d'impression. Appuyez sur OK.
Chapitre 12 Rehaussement des couleurs 12 Vous pouvez activer la fonction Rehaussement des couleurs pour imprimer des images plus vives. La durée d'impression sera plus longue. a Appuyez sur a ou sur b pour sélectionner Rehauss. coul. Appuyez sur OK. b Effectuez l'une des actions suivantes : Si vous souhaitez personnaliser la balance des blancs, la netteté ou la densité des couleurs, appuyez sur d ou sur c pour sélectionner On, puis passez à l’étape c.
Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash Recadrage 12 Si la photo est trop longue ou trop large pour tenir dans la mise en page choisie, une partie de la photo sera automatiquement recadrée. Le réglage par défaut est On. Si vous utilisez aussi le réglage Sans bordure, réglez l'option Sans bordure sur Off. (Voir Impression sans bordure à la page 121 .) a Appuyez sur a ou sur b pour sélectionner Recadrer. b Appuyez sur d ou sur c pour sélectionner Off (ou On).
Chapitre 12 Configuration de vos modifications comme les nouveaux réglages par défaut 12 Vous pouvez sauvegarder les réglages d’impression les plus utilisés en tant que réglages par défaut. Ces réglages restent opérationnels tant qu'ils ne sont pas modifiés. a Appuyez sur a ou sur b pour sélectionner votre nouveau réglage. Appuyez sur OK. Répétez cette étape pour chaque réglage que vous souhaitez modifier. b Une fois le dernier réglage modifié, appuyez sur a ou sur b pour sélectionner Régl.nouv.
Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash Comment numériser vers une carte mémoire ou un lecteur USB de mémoire Flash Format de fichier sélectionnable Couleur 150 dpi JPEG / PDF Couleur 300 dpi JPEG / PDF Couleur 600 dpi JPEG / PDF N/B 200x100 dpi TIFF / PDF N/B 200 dpi TIFF / PDF a Insérez une carte CompactFlash®, Memory Stick™, Memory Stick PRO™, SD, SDHC, xD-Picture Card™ ou un lecteur USB de mémoire Flash dans l'appareil.
Chapitre 12 h Appuyez sur a ou sur b pour sélectionner Type fichier. Appuyez sur d ou sur c pour sélectionner JPEG, PDF ou TIFF. Appuyez sur OK. Remarque • Si vous avez sélectionné couleur dans le réglage de la résolution, vous ne pouvez pas sélectionner TIFF. • Si vous avez sélectionné monochrome dans le réglage de la résolution, vous ne pouvez pas sélectionner JPEG. i Effectuez l'une des actions suivantes: Pour changer le nom de fichier, passez à l'étape j.
Impression de photos depuis une carte mémoire ou un lecteur USB de mémoire Flash Comment paramétrer un nouveau réglage par défaut 12 Vous pouvez paramétrer votre propre réglage par défaut. a Appuyez sur b Appuyez sur a ou sur b pour sélectionner Scan > Media. Appuyez sur OK. c Appuyez sur a ou sur b pour sélectionner Régl.nouv.défaut. Appuyez sur OK et 1 pour sélectionner Oui. d Appuyez sur Stop/Exit. (Scan).
13 Impression de photos à partir d'un appareil photo Impression directe de photos à partir d'un appareil photo PictBridge Configuration de votre appareil photo numérique 13 13 13 Vérifiez que votre appareil photo se trouve en mode PictBridge. Les réglages PictBridge suivants peuvent être disponibles depuis l'écran LCD de votre appareil photo compatible PictBridge. Suivant l'appareil photo, certains de ces réglages peuvent ne pas être disponibles.
Impression de photos à partir d'un appareil photo Réglages Options Format du papier 10 15 cm Type de papier Papier glacé Mise en page Sans bordure : Activé Qualité d'impression Fin Rehaussement des couleurs Désactivé Impression de la date Désactivé Impression d'images 13 Remarque Enlevez toute carte mémoire ou tout lecteur USB de mémoire Flash de l'appareil avant de brancher un appareil photo numérique.
Chapitre 13 Impression DPOF 13 DPOF est l'acronyme de Digital Print Order Format (format de commande d'impression numérique). Les grands fabricants d'appareils photo numériques (Canon Inc., Eastman Kodak Company, Fuji Photo Film Co. Ltd., Matsushita Electric Industrial Co. Ltd. et Sony Corporation) ont créé cette norme pour faciliter l'impression des images provenant d'un appareil photo numérique.
Impression de photos à partir d'un appareil photo Impression d'images 13 Remarque Enlevez toute carte mémoire ou tout lecteur USB de mémoire Flash de l'appareil avant de brancher un appareil photo numérique. a Vérifiez que l'appareil photo est mis hors tension. Connectez l'appareil photo à l'interface USB directe (1) de l'appareil au moyen du câble USB.
Chapitre 13 130
Section V Logiciel Fonctions des logiciels et fonctions réseau V 132
14 Fonctions des logiciels et fonctions réseau Le CD-ROM comprend le Guide utilisateur Logiciel et le Guide utilisateur - Réseau pour les fonctions disponibles lors du raccordement à un ordinateur (par exemple, impression et numérisation). Ces guides comportent des liens faciles à utiliser qui vous amèneront directement à une section particulière lorsque vous cliquez dessus.
Section VI Appendices Sécurité et réglementation Dépistage des pannes et entretien courant Menu et fonctions Spécifications Glossaire VI 134 144 177 204 219
A Sécurité et réglementation Choix d'un emplacement Placez l'appareil sur une surface plane et stable, à l'abri des vibrations et des chocs, un bureau par exemple. Placez l'appareil à proximité d'une prise téléphonique et d'une prise de courant reliée à la terre standard. Choisissez un emplacement où la température demeure entre 10 C et 35 C.
Sécurité et réglementation Utilisation de l'appareil en toute sécurité A Veuillez lire ces instructions avant de tenter toute opération de maintenance et les conserver pour pouvoir vous y reporter en cas de besoin. Remarque Si des fax sont présents dans la mémoire de l'appareil, vous devez les imprimer ou les enregistrer avant de débrancher l'appareil de la source de courant pendant plus de 24 heures.
Prenez soin de NE PAS placer les mains sur le bord de l’appareil sous le capot de document ou le capot du scanner. Vous risqueriez de vous blesser. Ne mettez PAS vos mains devant l'appareil sous le capot du scanner. Vous risqueriez de vous blesser. Prenez soin de NE PAS placer vos mains sur le bord du bac à papier sous le capot du bac à papier. Vous risqueriez de vous blesser.
Sécurité et réglementation Veillez à NE PAS toucher la zone sombre sur l'illustration. Vous risqueriez de vous blesser. Lorsque vous déplacez l'appareil, vous devez le soulever par la base, en plaçant une main de chaque côté, comme représenté sur l'illustration. Ne portez PAS l'appareil en tenant le capot du scanner ou le couvercle d'élimination du bourrage. N'utilisez PAS de substances inflammables ni aucun type de produits nettoyants liquides ou en aérosol à l'intérieur ou à l'extérieur de l'appareil.
Si l'appareil s'échauffe fortement ou produit de la fumée ou une odeur suspecte, débranchez immédiatement l'appareil de la prise de courant. Contactez votre revendeur Brother ou le service clientèle Brother. Si des objets métalliques, de l'eau ou d'autres liquides pénètrent à l'intérieur de l'appareil, débranchez immédiatement l'appareil de la prise de courant. Contactez votre revendeur Brother ou le service clientèle Brother.
Sécurité et réglementation Lorsque vous utilisez votre équipement téléphonique, vous devez toujours suivre les consignes de sécurité élémentaires afin de minimiser les risques d'incendie, d'électrocution et de blessures, par exemple : 1 Veillez à NE PAS utiliser cet appareil à proximité de l'eau, par exemple, près d'une baignoire, d'un lavabo, d'un évier ou d'une machine à laver, dans un sous-sol humide ou près d'une piscine. 2 Évitez d'utiliser cet appareil pendant un orage.
11 Attendez que les pages soient sorties de l'appareil avant de les prendre. 12 Débranchez ce produit de la prise de courant et faites appel à un centre d'entretien agréé Brother dans les conditions suivantes : Du liquide s'est répandu dans l'appareil. L'appareil a été exposé à la pluie ou à l'eau. Si l'appareil ne fonctionne pas normalement alors que vous respectez les instructions de fonctionnement, réglez uniquement les commandes mentionnées dans ces instructions.
Sécurité et réglementation Interférence radio A Ce produit est conforme à la norme EN55022 (CISPR Publication 22) /Classe B. Lorsque vous raccordez l'appareil à un ordinateur, veillez à utiliser un câble USB d'une longueur maximale de 2 mètres. Directive 2002/96/CE de l'UE et norme EN50419 A Union Européenne seulement Cet équipement est marqué du symbole de recyclage représenté ci-dessus.
Restrictions légales concernant la copie Il est illégal de faire des reproductions de certains articles ou documents si l’intention est de caractère frauduleux. Le présent avertissement tient lieu de guide et ne représente aucunement une liste complète. En cas d’incertitude quant à certains articles ou documents, nous vous suggérons de consulter les autorités juridiques compétentes.
Sécurité et réglementation Marques commerciales A Le logo Brother est une marque déposée de Brother Industries, Ltd. Brother est une marque déposée de Brother Industries, Ltd. © 2008-2010 Brother Industries, Ltd. Tous droits réservés. Windows Vista est une marque déposée ou une marque commerciale de Microsoft Corporation aux États-Unis et dans d'autres pays. Microsoft, Windows, Windows Server et Internet Explorer sont des marques déposées de Microsoft Corporation aux États-Unis et/ou dans d'autres pays.
B Dépistage des pannes et entretien courant Dépistage des pannes B B Si vous pensez qu'il y a un problème avec votre appareil, utilisez le tableau ci-dessous et suivez les conseils de dépistage des pannes. Vous pouvez corriger la plupart des problèmes par vous-même. Si vous avez besoin d'une aide supplémentaire, le Brother Solutions Center vous propose de consulter les questions fréquemment posées (FAQ) et les conseils de dépistage des pannes les plus récents.
Dépistage des pannes et entretien courant Impression (Suite) Difficulté Suggestions Des traits blancs horizontaux apparaissent dans le texte ou les graphiques. Nettoyez la tête d'impression. (Voir Nettoyage de la tête d'impression à la page 171.) Veillez à bien utiliser l'encre Innobella™ d'origine Brother. Essayez d'utiliser les types de papier recommandés. (Voir Papier et autres supports d'impression acceptables à la page 19.
Impression (Suite) Difficulté Suggestions La vitesse d'impression est trop lente. Essayez de modifier le réglage du pilote d'imprimante. Une plus haute résolution nécessite un temps plus important pour le traitement, l'envoi et l'impression des données. Essayez les autres réglages de qualité dans l'onglet Avancé du pilote d'imprimante. Cliquez aussi sur Paramètres de couleur et veillez à bien décocher Ajustement des couleurs. Désactivez la fonction Sans bordure.
Dépistage des pannes et entretien courant Ligne téléphonique ou branchements B Difficulté Suggestions La numérotation ne fonctionne pas. (Pas de tonalité) Vérifiez que l'appareil est bien branché et qu'il n'est pas en mode Économie d'énergie. Vérifiez les branchements du cordon de ligne téléphonique. Modifiez le réglage Tonalité/Impulsion. (uniquement pour la Suisse) (Voir le Guide d'installation rapide.
Envoi de fax (Suite) Difficulté Suggestions Le rapport de vérification de l'envoi indique « Résultat : ERREUR ». La ligne téléphonique est probablement affectée provisoirement par des parasites ou de l'électricité statique. Réessayez d'envoyer le fax. Si vous envoyez un PC-FAX et que vous obtenez le message « Résultat : ERREUR » sur le rapport de vérification de l'envoi, il s'agit peut-être d'une saturation de la mémoire de l'appareil.
Dépistage des pannes et entretien courant Difficultés pour copier B Difficulté Suggestions Impossible de faire une copie. Vérifiez que la touche Copie à la page 94.) Mauvais résultats de copie lors de l'utilisation du chargeur ADF. Essayez d'utiliser la vitre du scanner. (Voir Utilisation de la vitre du scanner à la page 24.) Des traits noirs verticaux ou des stries apparaissent sur les copies.
Difficultés avec PhotoCapture Center™ Difficulté Suggestions Le disque amovible ne fonctionne pas correctement. 1 2 3 4 5 Avez-vous installé la mise à jour de Windows® 2000? Si vous ne l'avez pas fait, suivez la procédure suivante : 1) Débranchez le câble USB. 2) Installez la mise à jour de Windows® 2000 en suivant une des méthodes suivantes. Installez MFL-Pro Suite à partir du CD-ROM. (Voir le Guide d'installation rapide.) Téléchargez le dernier Service Pack depuis le site Web de Microsoft.
Dépistage des pannes et entretien courant Détection de tonalité Lorsque vous envoyez un fax automatiquement, par défaut l'appareil attend un laps de temps prédéfini avant de composer le numéro. En réglant le Réglage Tonalité sur Détection, l'appareil peut composer le numéro dès qu'il détecte une tonalité. Ce réglage permet de gagner du temps lors de l'envoi d'un fax à plusieurs numéros différents.
Messages d'erreur et d'entretien Comme pour tout appareil de bureau sophistiqué, des erreurs peuvent se produire et des consommables peuvent devoir être remplacés. Si tel est le cas, votre appareil identifie l'erreur et affiche un message d'erreur. La liste ci-dessous explique les messages d'erreur et d'entretien les plus fréquents. Vous pouvez corriger la plupart des messages d'erreur et d'entretien courant par vous-même.
Dépistage des pannes et entretien courant Message d'erreur Cause Action Détection impos. Vous avez installé une cartouche d'encre neuve trop rapidement et l'appareil ne l'a pas détectée. Enlevez la cartouche d'encre neuve et réinstallez-la lentement jusqu'à entendre un déclic. Si vous utilisez une cartouche d'encre d'origine autre que Brother, il se peut que l'appareil ne puisse pas la détecter. Remplacez la cartouche par une cartouche d'encre d'origine Brother.
Message d'erreur Cause Impr. mono uniq. Une (ou plusieurs) des cartouches Remplacez les cartouches d'encre vides. d'encre de couleur est vide. (Voir Remplacement des cartouches d'encre à la page 166.
Dépistage des pannes et entretien courant Message d'erreur Cause Impress. imposs. Une ou plusieurs cartouches Remplacez les cartouches d'encre vides. d'encre sont vides. L'appareil (Voir Remplacement des cartouches arrête toutes les opérations d'encre à la page 166.) d'impression. Tant qu'il reste de la mémoire, les fax en noir et blanc y sont enregistrés.
Message d'erreur Cause Action Nettoy. imposs. XX L'appareil présente un problème mécanique. Ouvrez le capot du scanner et retirez le corps étranger qui est dans l'appareil. Si le message d'erreur persiste, débranchez le cordon d'alimentation de l'appareil pendant plusieurs minutes puis rebranchez-le. (Il est possible de mettre l'appareil hors tension pendant environ 24 heures sans perdre les fax présents en mémoire. Voir Transfert des fax ou du rapport du journal des fax à la page 158.
Dépistage des pannes et entretien courant Message d'erreur Cause Action Sans cartouche Une cartouche d'encre est mal installée. Enlevez la cartouche d'encre neuve et réinstallez-la lentement jusqu'à entendre un déclic. (Voir Remplacement des cartouches d'encre à la page 166.) Scan impossible XX L'appareil présente un problème mécanique. Ouvrez le capot du scanner et retirez le corps étranger qui est dans l'appareil.
Message d'erreur Cause Vérif. papier 1 (Vérifiez papier) Il n'y a plus de papier ou le papier Effectuez l'une des actions suivantes : n'est pas correctement chargé Placez du papier dans le bac à papier, dans le bac à papier. puis appuyez sur Mono Start ou sur Colour Start. Retirez le papier et rechargez-le, puis appuyez sur Mono Start ou sur Colour Start. Action Le papier est coincé dans l'appareil.
Dépistage des pannes et entretien courant Transfert des fax à un autre télécopieur c B Si vous n'avez pas configuré votre ID de station, vous ne pouvez pas passer en mode de transfert de fax. (Voir Entrer les informations personnelles (ID station) le Guide d'installation rapide.) a b c Appuyez sur Stop/Exit pour interrompre provisoirement l'erreur. Appuyez sur a ou sur b pour sélectionner Entretien. Appuyez sur OK. Appuyez sur a ou sur b pour sélectionner Transf.données. Appuyez sur OK.
Bourrage de document B Les documents peuvent se coincer dans le chargeur ADF s'ils ne sont pas insérés ou entraînés correctement, ou s'ils sont trop longs. Procédez comme suit pour supprimer un bourrage de document. Le document est coincé dans le haut du chargeur ADF a Retirez du chargeur ADF tout papier qui n'est pas coincé. b c Ouvrez le capot du chargeur ADF. d e a Retirez du chargeur ADF tout papier qui n'est pas coincé. b c Soulevez le capot document. d e Refermez le capot document.
Dépistage des pannes et entretien courant Bourrage de l'imprimante ou bourrage de papier (MFC-5890CN et MFC-5895CW) d B Ouvrez le couvercle d'élimination du bourrage (1) depuis l'arrière de l'appareil. Retirez le papier coincé de l'appareil. Retirez le papier coincé en fonction de la position du bourrage dans l'appareil. Ouvrez puis fermez le capot du scanner pour éliminer l'erreur. a Retirez le bac à papier (1) de l'appareil. 1 1 b Tirez sur le papier coincé (1) et appuyez sur Stop/Exit.
f Des deux mains, utilisez les prises situées des deux côtés de l'appareil pour soulever le capot du scanner (1) jusqu'à ce qu'il soit bloqué fermement en position ouverte. Assurez-vous qu'il ne reste plus de papier coincé dans l'appareil sous les couvercles en plastique. Vérifiez les deux extrémités du chariot d'impression. g Soulevez le capot du scanner pour débloquer le verrou (1). Sans forcer, poussez le support de capot du scanner vers le bas (2) et refermez le capot du scanner (3).
Dépistage des pannes et entretien courant Bourrage de l'imprimante ou bourrage de papier (MFC-6490CW seulement) b Tirez sur le papier coincé (1) et appuyez sur Stop/Exit. 1 B Retirez le papier coincé en fonction de la position du bourrage dans l'appareil. Ouvrez puis fermez le capot du scanner pour éliminer l'erreur. a Retirez le bac à papier (1) de l'appareil. 1 1 1 c Réinitialisez l'appareil en soulevant le capot du scanner à l'avant de l'appareil, puis refermez-le.
d Ouvrez le couvercle arrière extérieur (1) depuis l'arrière de l'appareil. Retirez le papier coincé de l'appareil. e Refermez le couvercle arrière intérieur (1) s'il est ouvert comme dans l'illustration ci-dessous. 1 1 f Fermez le couvercle arrière extérieur. Vérifiez que le couvercle est correctement fermé. g Des deux mains, utilisez les prises de doigts des deux côtés de l'appareil pour soulever le capot du scanner (1) en position ouverte.
Dépistage des pannes et entretien courant Remarque h • Si le papier est coincé sous la tête d'impression, débranchez l'appareil de la source d'alimentation puis déplacez la tête d'impression pour retirer le papier. Sans forcer, fermez le capot du scanner (1) à l'aide des poignées situées des deux côtés. B 1 • Si la tête d'impression se trouve dans le coin droit, comme indiqué sur l'illustration, vous ne pourrez pas la déplacer.
Entretien courant Remplacement des cartouches d'encre L'appareil est équipé d'un compteur de points d'encre. Le compteur de points d'encre contrôle automatiquement le niveau d'encre dans chacune des 4 cartouches. Lorsque l'appareil détecte qu'une cartouche d'encre est vide, un message s'affiche sur l'écran LCD. Un message affiché sur l'écran LCD vous indique quelle cartouche d'encre est presque vide ou doit être remplacée.
Dépistage des pannes et entretien courant a b Ouvrez le couvercle de la cartouche d'encre. Si une ou plusieurs cartouches d'encre sont vides, par exemple la noire, l'écran LCD affiche Impress. imposs. d Tournez le bouton vert sur le capuchon de protection jaune dans le sens des aiguilles d'une montre jusqu'au déclic pour libérer le joint hermétique, puis retirez le capuchon (1). Appuyez sur le levier de déverrouillage, comme indiqué, pour libérer la cartouche d'encre indiquée sur l'écran LCD.
f Sans forcer, poussez la cartouche d'encre jusqu'au déclic, puis fermez le couvercle de la cartouche d'encre. BK g Y C L'appareil réinitialise automatiquement le compteur de points d'encre. Remarque • Si vous avez remplacé une cartouche d’encre, par exemple la noire, l’écran LCD peut vous demander de vérifier qu'il s'agissait bien d'une neuve (par exemple, Avez-vs changé? Noir).
Dépistage des pannes et entretien courant Nettoyage de l'extérieur de l'appareil b Essuyez l'extérieur de l'appareil avec un chiffon doux pour retirer la poussière. B B ATTENTION Utilisez des détergents neutres. Un nettoyage avec un liquide volatil tel qu'un diluant ou de la benzine endommagera la surface extérieure de l'appareil. Veillez à NE PAS utiliser de produits de nettoyage contenant de l'ammoniaque. c Enlevez tout papier coincé à l'intérieur du bac à papier.
Nettoyage de la vitre du scanner a B Soulevez le capot document (1). Nettoyez la vitre du scanner (2) et le plastique blanc (3) à l'aide d'un chiffon doux non-pelucheux imbibé d'un nettoyant pour vitre non-inflammable. 1 Nettoyage du cylindre de l'imprimante de l'appareil AVERTISSEMENT Débranchez l'appareil de la prise de courant avant de nettoyer le cylindre de l'imprimante.
Dépistage des pannes et entretien courant Nettoyage du rouleau d'entraînement du papier a Retirez complètement les bacs à papier de l'appareil. b (MFC-5890CN et MFC-5895CW) Débranchez l'appareil de la prise de courant et ouvrez le couvercle d'élimination du bourrage (1) à l'arrière de l'appareil. d B B (MFC-6490CW) Fermez le couvercle arrière intérieur et le couvercle arrière extérieur. Vérifiez que le couvercle est correctement fermé.
a b c Appuyez sur Ink Management. e Appuyez sur a ou sur b pour sélectionner Nettoyage. Appuyez sur OK. Vérifiez la qualité des quatre blocs de couleur sur la page. f L'écran LCD affiche un message vous invitant à indiquer si la qualité d'impression est correcte. Effectuez l'une des actions suivantes : Appuyez sur a ou sur b pour sélectionner Noir, Couleur ou Tout. Appuyez sur OK. L'appareil nettoie la tête d'impression. Après le nettoyage, l'appareil repasse automatiquement en mode de veille.
Dépistage des pannes et entretien courant j Appuyez sur Stop/Exit. Si vous répétez cette procédure au moins cinq fois sans constater d'amélioration de la qualité d'impression, remplacez la cartouche d'encre de couleur dont la buse est colmatée. Après remplacement de la cartouche d'encre, vérifiez la qualité d'impression. Si le problème persiste, recommencez au moins cinq fois les procédures de nettoyage et d'essai d'impression avec la cartouche d'encre neuve.
Vérification du volume d'encre B Bien qu'une icône de volume d'encre s'affiche sur l'écran LCD, vous pouvez utiliser la touche Ink Management pour visualiser un grand graphique indiquant le niveau d'encre restant dans chaque cartouche. a b c Quand vous devez déplacer l'appareil, utilisez son emballage d'origine. Suivez les instructions ci-dessous afin d'emballer correctement votre appareil. Tout dommage encouru par l'appareil pendant le transport n'est pas couvert par la garantie.
Dépistage des pannes et entretien courant g ATTENTION Veillez à ce que les languettes en plastique des deux côtés de l'élément de protection vert (1) soient fermement imbriquées à leur place (2). 1 (MFC-5890CN et MFC-5895CW) Soulevez le capot du scanner (1) pour débloquer le verrou. Sans forcer, poussez le support de capot du scanner vers le bas (2) et refermez le capot du scanner (3). 2 Si vous ne trouvez pas l'élément de protection vert, NE retirez PAS les cartouches d'encre avant le transport.
h Emballez l'appareil dans le sac. i Emballez l'appareil et les documents imprimés dans le carton d'origine avec les matériaux d'emballage d'origine comme indiqué ci-dessous. Ne placez pas les cartouches d'encre usagées dans le carton. (MFC-6490CW) (MFC-5890CN et MFC-5895CW) j 176 Fermez le carton à l'aide de ruban adhésif.
C Menu et fonctions Programmation à l'écran C Touches de mode et de menu L'appareil est conçu pour être facile à utiliser avec programmation sur l'écran LCD à l'aide des touches de menu. La programmation conviviale vous aide à tirer pleinement parti de toutes les sélections de menu de l'appareil. Appuyez pour accéder aux réglages provisoires pour chaque mode. a C Vous pouvez programmer votre appareil en utilisant le tableau des menus qui commence à la page 178.
Tableau des menus C Le tableau des menus va vous aider à comprendre les sélections et les options de menu que vous pouvez trouver dans les programmes de l’appareil. Les réglages par défaut sont affichés en caractères gras avec un astérisque. Menu ( ) Niveau1 Niveau2 Niveau3 Options Descriptions Page Param. général Mode chrono. — Off Permet de régler l’heure à laquelle repasser en mode Fax. 27 Permet de configurer le type de papier dans le bac à papier.
Menu et fonctions Niveau1 Niveau2 Niveau3 Options Descriptions Page Param. général Paramètre bac Bac 2 (MFC-6490CW) Luminosité (Option) Papier nomal Permet de configurer le format du papier dans le bac à papier 2. 28 (suite) (suite) Format papier (Options) C A4* A3 Letter Legal Ledger Usage bac:cop Bac 1* Bac 2 Usage bac:fax Bac 1 Bac 2 Sélect. auto.* Volume Sonnerie Off Bas Permet de sélectionner le bac qui sera utilisé pour le mode Copie.
Niveau1 Niveau2 Niveau3 Options Descriptions Page Param. général Mode veille — 1Min Vous pouvez choisir la durée pendant laquelle l'appareil reste inactif avant de passer en mode Veille. 32 Désactivez ce réglage lorsque vous utilisez du papier A3 au grain court. 30 — Vous pouvez restreindre le fonctionnement de l'appareil sélectionné à 20 utilisateurs restreints maximum et à tous les autres utilisateurs publics non autorisés.
Menu et fonctions Niveau1 Niveau2 Niveau3 Options Descriptions Page Fax Param. RC. Réception mém. (suite) Vous pouvez configurer l'appareil pour qu'il réadresse les fax, enregistre les fax entrants en mémoire (de sorte que vous puissiez les extraire si vous n'êtes pas à portée de votre appareil) ou envoie les fax à votre ordinateur. Si vous sélectionnez la fonction Réadressage de fax ou Réception PC-FAX, vous pouvez activer la fonction de sécurité Impression de sauvegarde.
Menu Réseau Niveau1 Réseau Niveau2 LAN câblé Niveau3 TCP/IP Niveau4 Méthode BOOT Options Auto* Statique RARP BOOTP DHCP Adresse IP [000-255]. [000-255]. Descriptions Permet de sélectionner la méthode d'amorçage (BOOT) qui correspond le mieux à vos besoins. Permet de saisir l'adresse IP. [000-255]. Masq.SS.réseau [000-255] [000-255]. [000-255]. Permet de saisir le masque de sous-réseau. [000-255]. Passerelle [000-255] [000-255]. [000-255]. Permet de saisir l'adresse de passerelle. [000-255].
Menu et fonctions Niveau1 Réseau Niveau2 LAN câblé Niveau3 TCP/IP (suite) (suite) (suite) Ethernet Niveau4 IPv6 Options On Off* — Auto* 100B-FD Descriptions Permet d'activer ou de désactiver le protocole IPv6. Si vous souhaitez utiliser le protocole IPv6, visitez le site Web http://solutions. brother.com pour plus d'informations. Permet de choisir le mode de liaison Ethernet.
Niveau1 Réseau Niveau2 WLAN Niveau3 TCP/IP (suite) (MFC-5895CW et MFC-6490CW) (suite) Niveau4 Serveur WINS Options (Primaire) 000.000.000.000 (Secondaire) 000.000.000.000 (suite) Serveur DNS (Primaire) 000.000.000.000 (Secondaire) 000.000.000.000 APIPA On* Off IPv6 On Assis. config. — Off* — WPS/AOSS — — WPS avec PIN — — Etat WLAN Etat — Signal — SSID — Mode de comm. — (MFC-5895CW) SES/WPS/AOSS (MFC-6490CW) Voir le Guide utilisateur - Réseau sur le CD-ROM.
Menu et fonctions Niveau1 Réseau Niveau2 E-mail/IFAX (suite) (MFC-6490CW) (Disponible sous la forme d'un téléchargement pour MFC-5890CN et MFC-5895CW) Niveau3 Adresse mail Niveau4 Adresse mail Options — Config. serv. Serveur SMTP Nom (30 caractères maximum) Descriptions Permet de saisir l'adresse de messagerie. (60 caractères maximum) Permet de saisir l'adresse du serveur SMTP. Adresse IP [000-255]. [000-255]. [000-255]. [000-255] Port SMTP [00001-65535] Auth.
Niveau1 Réseau Niveau2 E-mail/IFAX (suite) (MFC-6490CW) Niveau3 Config RC mail Niveau4 Réception auto Options On* Off (Disponible sous la forme d'un téléchargement pour MFC-5890CN et MFC-5895CW) Période RC 10Min En-tête Tout (suite) Sujet+De+A Sans* Eff. mail err. On* Off Avis On MDN Config TX mail Sujet émetteur Off* — Limite taille On Off* Avis On Off* Config.relai Diff.relai On Off* Domaine relai — Rapport relais On Off* Voir le Guide utilisateur - Réseau sur le CD-ROM.
Menu et fonctions Niveau1 Réseau Niveau2 Scan > FTP Niveau3 Mode passif (suite) Niveau4 Off Options — On* Fuseau horaire Numéro de port — — Nom fichier1 Nom fichier2 — — — — Config. profil Non enregistré — — UTC+XX:XX — — LAN câblé* — (MFC-6490CW) (Disponible sous la forme d'un téléchargement pour MFC-5890CN et MFC-5895CW) Interface rés. (MFC-5895CW et MFC-6490CW) Réinit.
Menu ( ) (suite) Niveau1 Niveau2 Niveau3 Options Descriptions Page Imprime rapp. Rapport trans. — — Permet d'imprimer ces listes et ces rapports. 88 Liste d’aide — — No. abrégés — Ordre alphabétique Ordre numérique Journal fax — — Param. util. — — Config. réseau — — Hist.ID appel. — — Info. appareil No. de série — — Permet de vérifier le numéro de série de votre appareil. 174 Param.
Menu et fonctions Fax ( ) Niveau1 Niveau2 Niveau3 Options Descriptions Résolution fax — — Standard* Permet de régler la résolution 47 des fax sortants. Fin Page C Superfin Photo Contraste — — Auto* Clair Permet de changer la clarté ou la noirceur des fax que vous envoyez. 47 Foncé Format scan vitre — — A4* A3 (MFC-6490CW) Permet de régler le format de 44 numérisation de la vitre sur Fax.
Niveau1 Niveau2 Niveau3 Options Descriptions Page Envoi différé — — On (00:00) Permet de régler l'heure (exprimée au format 24 heures) à laquelle les fax différés seront envoyés. 49 Off* TX différé — — On Off* TX immédiat — — On Off* Relève TX — — Standard Protégé Off* Relève RC — — Standard Protégé Permet de combiner tous les 49 fax différés envoyés au même numéro de fax à la même heure de la journée en un seul envoi. Vous pouvez envoyer un fax sans utiliser la mémoire.
Menu et fonctions Scan ( ) Niveau1 Option1 Scan > E-mail PC Serveur e-mail Option2 Option3 Descriptions Page — — Vous pouvez numériser un document monochrome ou couleur vers votre application de messagerie. Voir le Guide utilisateur - Logiciel sur le CD-ROM.
Niveau1 Option1 Option2 Option3 Descriptions Scan > Fichier — — — Vous pouvez numériser un Voir le document monochrome ou Guide couleur vers votre ordinateur. utilisateur - Logiciel sur le CD-ROM. Scan > Media (lorsqu'une carte mémoire ou un lecteur USB de mémoire Flash est inséré) — Couleur 150 dpi* Vous pouvez choisir la 123 résolution de numérisation et le format du fichier, et saisir un nom de fichier pour votre document.
Menu et fonctions Niveau1 Option1 Option2 Option3 Descriptions Scan > FTP (Nom du profil) — — Saisissez le nom que vous souhaitez utiliser pour le profil du serveur FTP. Ce nom sera affiché sur l'écran LCD. Manuel Qualité Couleur 150 dpi* Couleur 300 dpi Page Voir le Guide utilisateur - Logiciel sur le Permet de sélectionner le format du fichier pour envoyer CD-ROM. les données numérisées par le biais d'un support.
Copy ( ) Niveau1 Niveau2 Niveau3 Options Descriptions Page Qualité — — Rapide Permet de sélectionner la résolution de copie pour votre type de document. 95 Normale* Meilleure Agrandir/Réduir 100%* — — — 96 Agrandir — 198% 10x15cmiA4 Vous pouvez choisir le facteur d'agrandissement adapté à votre type de document. 96 Vous pouvez choisir le facteur de réduction adapté à votre type de document.
Menu et fonctions Niveau1 Niveau2 Niveau3 Luminosité — — Options Descriptions Page Permet de régler la luminosité des copies. 99 C Contraste — — +2 +1 Permet de régler le contraste des copies. 99 Vous pouvez décider d'empiler ou de trier les copies multiples.
Niveau1 Niveau2 Niveau3 Cop. filigrane Cop. filigrane On Off* Paramètre actuel — Options Descriptions (Si vous sélectionnez On, consultez les réglages de copie du filigrane dans le tableau suivant.) Vous pouvez insérer un logo 101 ou un texte dans votre document sous la forme d'un filigrane. — — Régl.nouv.défaut — — Oui Mise zéro usine — — Sortie Non Oui Non Vous pouvez enregistrer vos réglages de copie. 103 Vous pouvez rétablir les réglages par défaut de tous les réglages.
Menu et fonctions Réglages de copie du filigrane Option1 Option2 Option3 Option4 Descriptions Page Modèle — Texte CONFIDENTIEL* BROUILLON COPIE Permet d'insérer un texte dans votre document sous la forme d'un filigrane en utilisant un modèle.
Option1 Option2 Option3 Option4 Descriptions Page Support (Sélectionnez une image sur le support) Position A Permet d'insérer un logo ou un texte dans votre document sous la forme d'un filigrane en utilisant une image stockée sur un support amovible. 102 Permet d'insérer un logo ou un texte dans votre document sous la forme d'un filigrane en utilisant une image numérisée.
Menu et fonctions Photo Capture ( ) Niveau1 Niveau2 Niveau3 Options Descriptions Page Visual.photos — — Voir les réglages Vous pouvez prévisualiser 109 d'impression dans vos photos sur l'écran LCD. le tableau suivant. Impr. index — Frmt mise pge 6 images/ligne* Vous pouvez imprimer une page de miniatures. 5 images/ligne Type papier Papier normal* C 110 Pap.jet d’encre Brother BP71 Autre - Glacé Format papier A4* Letter Imprim.
Réglages d'impression Option1 Option2 Option3 Option4 Descriptions Page Qualité impr. Normale — — 118 (Pas disponible pour l'impression DPOF) Photo* Permet de sélectionner la qualité d’impression. Type papier Papier normal — — Permet de sélectionner le type de papier. 118 Permet de sélectionner le format d’impression et celui du papier. 119 Pap.
Menu et fonctions Option1 Option2 Rehauss. coul. On (Non disponible lorsque Effets photo est sélectionné) Option3 Balance blancs Off* Option4 +2 +1 Descriptions Page Permet d'ajuster la tonalité des zones blanches. 120 -1 C -2 Netteté +2 +1 Permet de rehausser le détail de l'image. -1 -2 Densité coul. +2 +1 Permet de régler la quantité totale de couleur dans l'image.
Répertoire ( ) Niveau1 Niveau2 Niveau3 Options Descriptions Page Recherche — — Ordre alphabétique Vous pouvez composer le numéro simplement en appuyant sur quelques touches (et Start). 75 Ordre numérique Déf. No. monotouche — — — Permet d'enregistrer des numéros de composition par monotouche afin que vous puissiez composer le numéro simplement en appuyant sur quelques touches (et Start).
Menu et fonctions Saisie de texte C Quand vous configurez certaines sélections de menu comme l’ID de station, il arrive qu'il faille saisir du texte dans l’appareil. La plupart des touches du pavé numérique comportent trois ou quatre lettres. Les touches 0, # et l n’ont pas de lettres car elles sont assignées à des caractères spéciaux. Appuyez à plusieurs reprises sur la touche correcte du pavé numérique pour obtenir le caractère voulu.
D Spécifications D Généralités Type d’imprimante Méthode d’impression Volume de la mémoire Écran LCD (écran à cristaux liquides) Source d’alimentation Consommation électrique D Jet d’encre Mono : Piézo avec 94 2 buses Couleur : Piézo avec 94 3 buses 64 Mo Écran LCD couleur 3,3 po (84,6 mm) 220 à 240 V CA, 50/60 Hz (MFC-5890CN) Mode Économie d'énergie : 0,8 W en moyenne Mode Veille : Attente : 4,5 W en moyenne 6 W en moyenne Fonctionnement : 27 W en moyenne (MFC-5895CW) 1 Éteint : Environ 0,8 W
Spécifications Dimensions (MFC-5890CN et MFC-5895CW) 242 mm 485 mm D 408 mm 460 mm (MFC-6490CN) 323 mm 540 mm 488 mm 574 mm 543 mm 205
Poids (MFC-5890CN et MFC-5895CW) 10,9 kg (MFC-6490CW) 15,6 kg Bruit Fonctionnement : LPAm = 50 dB ou moins 1 Bruit conformément à la norme ISO 9296 (MFC-5890CN et MFC-5895CW) Fonctionnement : LWAd = 64,3 dB (A) (Mono) LWAd = 61,6 dB (A) (Couleur) (MFC-6490CW) Fonctionnement : LWAd = 64,1 dB (A) (Mono) LWAd = 55,2 dB (A) (Couleur) Un équipement de bureau avec LWAd > 63,0 dB (A) ne convient pas pour une utilisation dans les pièces dans lesquelles s'effectuent des tâches essentiellement intellectu
Spécifications Support d'impression Entrée papier D Bac à papier Type de papier : Papier ordinaire, papier jet d'encre (papier couché), papier glacé 2, transparents 1 2 et enveloppes D Format du papier : Ledger, A3, Letter, Legal, Executive, A4, A5, A6, JIS B4, JIS B5, enveloppes (commercial N10, DL, C5, Monarch, JE4), Photo 10 x 15 cm, Photo L, Photo 2L, Fiche et Carte postale 3.
Fax D Compatibilité ITU-T Super Groupe 3 Vitesse du modem Repli automatique 33600 bit/s Largeur de numérisation (MFC-5890CN et MFC-5895CW) 208 mm (papier au format Letter) 204 mm (papier au format A4) (MFC-6490CW) 288 mm Largeur d’impression 291 mm Échelle des gris 256 niveaux Résolution Horizontale 8 points/mm Verticale Standard 3,85 lignes/mm (Mono) 7,7 lignes/mm (Couleur) Fin 7,7 lignes/mm (Mono/Couleur) Photo 7,7 lignes/mm (Mono) Super fin 15,4 lignes/mm (Mono) Numérotation par monotouch
Spécifications Copie D Couleur/Monochrome Oui/Oui Largeur de copie (MFC-5890CN et MFC-5895CW) Max. 210 mm (MFC-6490CW) D Max.
PhotoCapture Center™ D Support compatible 1 CompactFlash® (Type I seulement) (Microdrive™ n'est pas compatible) (Les cartes E/S compactes telles que les cartes Compact LAN et les cartes Compact Modem ne sont pas prises en charge.
Spécifications PictBridge Compatibilité D Prend en charge la norme PictBridge CIPA DC-001 de la Camera & Imaging Products Association. Consultez le site http://www.cipa.jp/pictbridge pour plus d’informations.
Scanner D Couleur/Monochrome Oui/Oui Compatible TWAIN (MFC-5890CN et MFC-6490CW) Oui (Windows® 2000 Professionnel/XP/XP Professionnel Édition x64/Windows Vista®) Mac OS X 10.2.4 - 10.3.x - 10.4.x - 10.5.x (MFC-5895CW) Oui (Windows® 2000 Professionnel/Windows® XP/ Windows® XP Professionnel Édition x64/Windows Vista®/ Windows® 7) Mac OS X 10.4.11 - 10.5.x - 10.6.
Spécifications Imprimante D Résolution Jusqu’à 1200 x 6000 dpi Largeur d’impression 291 mm (297 mm) 1 (Format A3) Sans bordure Ledger, A3, Letter, A4, A6, B4, Photo (10 15 cm), Photo L (89 127 mm), Photo 2L (13 18 cm), Fiche Carte postale 2 1 Quand la fonction Sans bordure est activée. 2 Voir Type de papier et format du papier pour chaque opération à la page 21.
Interfaces D USB 1 2 Un câble d’interface USB 2.0 ne mesurant pas plus de 2 m. Câble réseau local 3 Câble UTP Ethernet de catégorie 5 ou supérieure. Réseau local sans fil (MFC-5895CW et MFC-6490CW) IEEE 802.11b/g (mode infrastructure/mode Ad-hoc) 1 Votre appareil possède une interface USB 2.0 Hi-Speed. L'appareil peut également être connecté à un ordinateur doté d'une interface USB 1.1. 2 Les ports USB d’autres fournisseurs ne sont pas pris en charge pour Macintosh.
Spécifications Configuration de l'ordinateur (MFC-5890CN et MFC-6490CW) D SYSTÈMES D'EXPLOITATION ET FONCTIONS LOGICIELLES PRIS EN CHARGE Plate-forme Fonctions Interface Vitesse Mémoire Mémoire Disque dur à installer informatique et système logicielles PC minimum du vive vive Pour les Pour les d'exploitation prises en processeur minimum (RAM) charge recommandée pilotes applications Système 2000 Impression, USB, 64 Mo 256 Mo 110 Mo 340 Mo Intel® d'exploitation Professionnel 5 Envoi ® Pentium II PC-Fax 4,
Configurations requises de l'ordinateur (MFC-5895CW) D SYSTÈMES D'EXPLOITATION ET FONCTIONS LOGICIELLES PRIS EN CHARGE Espace libre sur le Fonctions de Vitesse Mémoire Mémoire vive disque dur pour installer Plate-forme de l'ordinateur logiciel PC Interface minimum du vive (RAM) (RAM) et version du système PC prises en processeur minimum recommandée Pour les Pour les d'exploitation charge pilotes applications ® ® ® Système Impression, USB, 10/100 Intel Pentium II ou 64 Mo 256 Mo 110 Mo 340 Mo Windows 2000
Spécifications Consommables D Encre L’appareil utilise des cartouches d’encre noire, jaune, cyan et magenta individuelles qui sont autonomes par rapport à l’ensemble de tête d’impression. Durée de vie de la cartouche d’encre Cartouches d'encre de rechange La première fois que vous installez les cartouches d'encre, l'appareil utilise de l'encre pour remplir les tubes d'alimentation pour un résultat d'impression optimal. Ce processus ne se déroule qu'une seule fois.
Réseau (local) D Remarque Pour des détails sur les spécifications réseau complètes, voir le Guide utilisateur - Réseau sur le CD-ROM. Réseau local Vous pouvez connecter l'appareil à un réseau pour l'impression réseau, la numérisation réseau, l'envoi PC-FAX, la réception PC-FAX (Windows® seulement) et la configuration à distance 1. Le logiciel de gestion de réseau BRAdmin Light 2 Brother est aussi fourni.
E Glossaire E Voici une liste complète des caractéristiques et des termes qui apparaissent dans les guides de Brother. La disponibilité de ces caractéristiques dépend du modèle acheté. Accès pour extraction à distance Possibilité d'accéder à l'appareil à distance à partir d'un poste à touches. Diffusion Capacité d'envoyer le même fax à plusieurs destinataires.
Fax différé Permet d'envoyer le fax à une heure spécifiée ultérieurement. Fax manuel Quand vous soulevez le combiné de votre téléphone externe, vous pouvez entendre la réponse du télécopieur récepteur avant d'appuyer sur Mono Start ou sur Colour Start pour commencer à envoyer le fax. Fax/Tél Vous pouvez recevoir des fax et des appels téléphoniques. N'utilisez pas ce mode si vous utilisez un répondeur téléphonique (RÉP). Groupe de compatibilité Aptitude d'un télécopieur à communiquer avec un autre.
Glossaire Numérisation Procédé qui consiste à envoyer une image électronique d'un document papier dans votre ordinateur. Numériser vers support Vous pouvez numériser un document monochrome ou couleur vers une carte mémoire ou un lecteur USB de mémoire Flash. Le format des fichiers des images monochromes peut être TIFF ou PDF et celui des images couleur peut être PDF ou JPEG. Numéro abrégé Numéro préprogrammé pour une numérotation facile.
Réglages provisoires Vous pouvez choisir certaines options pour chaque envoi de fax et chaque opération de copie sans pour autant modifier les réglages par défaut. Réglages utilisateur Rapport imprimé indiquant les réglages actuels de l'appareil. Rehaussement des couleurs Permet d'ajuster la couleur de l'image pour une meilleure qualité d'impression, en améliorant la netteté, la balance des blancs et la densité des couleurs.
F Index A Aide Messages de l'écran LCD ...................177 utilisation des touches de mode et de menu ................................................177 Tableau des menus ................... 177, 178 Annulation Réadressage de fax ..............................65 tâches en attente de recomposition du numéro ..................................................49 Apple Macintosh Voir le Guide utilisateur - Logiciel sur le CD-ROM. Automatique réception de fax ....................................
format du papier ..................................100 livre .....................................................101 luminosité ..............................................99 mémoire saturée .................................103 mise en page (N en 1) ..........................97 multiple ..................................................94 passer en mode Copie ..........................94 qualité ...................................................95 restaurer les réglages par défaut ........103 simple ...
Fonctions téléphoniques personnalisées sur une ligne unique ...............................148 G Groupes de diffusion ................................83 H Historique d'identification de l'appelant ....76 Hors zone (ID appelant) ...........................68 I Identification de l'appelant .......................68 Impression bourrages de papier ................... 161, 163 difficultés .................................... 144, 146 fax à partir de la mémoire .....................57 pilotes .................
Mode, passage Copie .....................................................94 Monotouche configuration .........................................78 Multitâche .................................................48 N Nettoyage cylindre de l'imprimante ......................170 rouleau d'entraînement du papier .......171 scanner ...............................................170 tête d'impression .................................171 Numérisation Voir le Guide utilisateur - Logiciel sur le CD-ROM.
Réglages d'impression Configuration de nouveaux réglages par défaut .........................................122 Contraste .........................................119 Luminosité .......................................119 Qualité .................................... 117, 118 Rétablissement des réglages par défaut ...............................................122 Type et format de papier ......... 118, 119 Sans bordure ......................................121 SD ............................................
T Tableau des menus ...............................177 Téléphone externe, branchement ............72 Téléphone sans fil ....................................72 Téléphone supplémentaire, utilisation .....73 Texte, saisie ...........................................203 caractères spéciaux ............................203 Touche Sélection bac ............................100 Touche Tél/R, utilisation ............................6 Transfert des fax ou du rapport du journal des fax ..................................
Visitez notre site Internet http://www.brother.com Cet appareil a été approuvé pour être utilisé dans le pays d'achat uniquement. Les filiales locales de Brother ou leurs revendeurs ne prendront en charge que les appareils achetés dans leur propre pays.