User Manual
Table Of Contents
- Quick Setup Guide MFC-5895CW
- Start Here
- 1 Unpack the machine and check the components
- 2 Load plain A4 paper
- 3 Connect the power cord and telephone line
- 4 Install the ink cartridges
- 5 Check the print quality
- 6 Choose your language
- 7 Choose a Receive Mode
- 8 Set the date and time
- 9 Enter personal information (station ID)
- 10 Set tone or pulse dialling mode
- 11 Set the telephone line type
- 12 Choose your connection type
- For USB interface users (Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®/Windows® 7)
- For USB interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- For wired network interface users (Windows® 2000 Professional/XP/ XP Professional x64 Edition/ Windows Vista®/Windows® 7)
- For wired network interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- For wireless network interface users
- 13 Before you begin
- 14 Confirm your network environment (Infrastructure Mode)
- Connecting the Brother machine to the wireless network
- Install the drivers & software (Windows® 2000 Professional/XP/XP Professional x64 Edition/ Windows Vista®/Windows® 7)
- Install the drivers & software (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- Install Optional Applications Windows®
- For Network Users
- Safety and Legal
- brother CEE-ENG
- Start Here
15
Macintosh
Wired Network
Windows
®
Macintosh
Wired Network
15
Install MFL-Pro Suite
a Put the supplied CD-ROM into your CD-ROM
drive.
b Double-click the Start Here OSX icon to install.
c Choose Wired Network Connection, and
then click Next. Follow the on-screen
instructions.
d Please wait, it will take a few seconds for the
software to install. After the installation, the
Brother software will search for the Brother
device.
e If the machine is configured for your network,
choose the machine from the list, and then click
OK.
f When this screen appears, click Next.
g When the Brother Support screen appears,
click Close.
Finish
The installation is now
complete.
Note
If you specify an IP Address for the machine, you
must set the Boot Method to Static by using the
control panel. For more information, see the
Network User’s Guide on the CD-ROM.