Network User's Guide
Table Of Contents
- GUIDE UTILISATEUR - RÉSEAU
- Table des matières
- 1 Introduction
- Présentation
- Fonctions réseau
- Types de connexion réseau
- Protocoles
- Protocoles TCP/IP et fonctions
- DHCP/BOOTP/RARP
- APIPA
- Client DNS
- LPR/LPD
- Client SMTP (pour le MFC-6490CW et MFC-6890CDW)
- Port9100
- mDNS
- TELNET
- SNMP
- Web Services
- Client FTP (pour le MFC-5890CN, MFC-5895CW, le MFC-6490CW et MFC-6890CDW)
- LDAP (pour MFC-6890CDW)
- IPv6 (pour le MFC-5490CN, le MFC-5890CN, MFC-5895CW, MFC-6490CW, DCP-6690CW et MFC-6890CDW)
- Autre protocole
- Protocoles TCP/IP et fonctions
- 2 Configuration de votre appareil pour un réseau ayant une connexion Ethernet câblée
- Présentation
- Adresses IP, masques de sous-réseau et passerelles
- Tableau étape par étape
- Paramétrage de l'adresse IP et du masque de sous-réseau
- Modification des paramètres du serveur d'impression
- Utilisation de l'utilitaire BRAdmin Light pour modifier les paramètres du serveur d'impression
- Utilisation de l'utilitaire BRAdmin Professional pour modifier les paramètres sans fil (Pour Windows®)
- Utilisation de la configuration à distance pour modifier les paramètres du serveur d'impression (Non disponible pour les modèles DCP)
- Utilisation du panneau de commande pour modifier les paramètres du serveur d'impression
- 3 Configuration de votre appareil pour un réseau sans fil (non disponible pour le MFC-5490CN et le MFC-5890CN)
- Présentation
- Termes et concepts relatifs aux réseaux sans fil
- Tableau étape par étape pour la configuration du réseau sans fil
- Confirmation de l'environnement de votre réseau
- Confirmez votre méthode de configuration du réseau sans fil
- Configuration utilisant l'assistant de configuration à partir du panneau de commande de l'appareil pour configurer votre appareil réseau sans fil
- Configuration utilisant le menu SES/WPS/AOSS du panneau de commande (uniquement en mode infrastructure)
- Configuration utilisant la Méthode NIP de Wi-Fi Protected Setup™ (uniquement en mode infrastructure)
- Configuration utilisant l'application de l'installateur Brother qui se trouve sur le CD-ROM pour configurer votre appareil réseau sans fil
- Configuration de votre appareil pour un réseau sans fil
- Utilisation de l'Assistant de configuration à partir du panneau de commande
- Utilisation du menu SES/WPS/AOSS du panneau de commande pour configurer votre appareil pour un réseau sans fil
- Utilisation de la Méthode NIP de Wi-Fi Protected Setup™
- Utilisation de l'application de l'installateur automatique de Brother, contenue sur le CD-ROM, pour configurer votre appareil pour un serveur sans fil
- 4 Configuration sans fil pour Windows® à l'aide de l'application d'installation Brother (non disponible pour le MFC-5490CN et le MFC-5890CN)
- 5 Configuration sans fil pour Macintosh à l'aide de l'application d'installation Brother (non disponible pour le MFC-5490CN et le MFC-5890CN)
- 6 Configuration à l'aide du panneau de commande
- Menu Réseau
- TCP/IP
- Para. divers (le MFC-5490CN uniquement)
- Assistant de configuration (réseau sans fil uniquement)
- SES/WPS/AOSS (réseau sans fil uniquement)
- WPS avec code NIP (réseau sans fil uniquement)
- Statut WLAN (réseau sans fil uniquement)
- Ethernet (réseau câblé seulement)
- Courriel / I-FAX (pour le MFC-6490CW et MFC-6890CDW)
- Numér. vers FTP (pour le MFC-5890CN, MFC-5895CW et le MFC-6490CW)
- Numérisation vers FTP (pour MFC-6890CDW)
- Fuseau horaire (pour le MFC-5895CW, MFC-6490CW et MFC-6890CDW)
- I/F Réseau (non disponible pour le MFC-5490CN et le MFC-5890CN)
- LDAP (pour MFC-6890CDW)
- Restauration des paramètres réseau aux réglages par défaut
- Impression de la liste de configuration du réseau
- Menu Réseau
- 7 Assistant de déploiement de pilote (Windows® uniquement)
- 8 Impression en réseau à partir de l'impression poste-à-poste de base à l'aide de TCP/IP de Windows®
- 9 Impression en réseau à partir d'un Macintosh
- 10 Utilisation de LDAP (pour MFC-6890CDW)
- 11 Fax Internet et Numérisation vers courriel (pour le MFC-6490CW et MFC-6890CDW)
- Présentation de Fax Internet
- Pour vous connecter
- Fonctions des touches du panneau de commande
- Envoi d'un fax par Internet
- Saisie manuelle du texte
- Réception d'un courriel ou d'un fax Internet
- Réception d'un fax Internet sur un ordinateur
- Réadressage des courriers électroniques et des télécopies reçus
- Diffusion relais
- Message de vérification de transmission
- Config TX cour
- Config Rc cour
- Avis d'erreur
- Informations importantes concernant la fonction Fax Internet
- Présentation du serveur Numérisation vers courriel (le MFC-6490CW et MFC-6890CDW)
- Présentation de Fax Internet
- 12 Caractéristiques de sécurité (pour le MFC-6490CW et MFC-6890CDW)
- 13 Dépistage des pannes
- Annexe A
- Utilisation des services
- Autres moyens de définir l'adresse IP (pour les utilisateurs avancés et les administrateurs)
- Utilisation de DHCP pour configurer l'adresse IP
- Utilisation de BOOTP pour configurer l'adresse IP
- Utilisation de RARP pour configurer l'adresse IP
- Utilisation de APIPA pour configurer l'adresse IP
- Utilisation de ARP pour configurer l'adresse IP
- Utilisation de la console TELNET pour configurer l'adresse IP
- Installation si une file d'impression réseau ou partagée est utilisée (pilote d'imprimante seulement)
- Installation quand vous utilisez les Web Services (pour les utilisateurs de Windows Vista® et Windows® 7)
- Annexe B
- Annexe C
- Remarques relatives aux licences Open Source
- Ce produit intègre un logiciel SNMP de WestHawk Ltd.
- Avis OpenSSL
- Déclarations relatives à OpenLDAP
- This product includes software developed by the OpenLDAP Project.
- Ce produit comprend un logiciel développé par le projet OpenLDAP.
- The OpenLDAP Public License Version 2.8, 17 August 2003
- La licence publique OpenLDAP Version 2.8, 17 août 2003
- The OpenLDAP Public License
- Licence publique OpenLDAP
- RFC 2251 Full Copyright Statement
- Déclaration complète de droit d'auteur RFC 2251
- Remarques relatives aux licences Open Source
- Index
Annexe C
199
C
The OpenLDAP Public License C
Version 2.0.1, 21 December 1999
Copyright 1999, The OpenLDAP Foundation, Redwood City, California, USA. Tous droits réservés.
Redistribution and use of this software and associated documentation ("Software"), with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain copyright statements and notices. Redistributions must also
contain a copy of this document.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. The name "OpenLDAP" must not be used to endorse or promote products derived from this Software
without prior written permission of the OpenLDAP Foundation. For written permission, please contact
foundation@openldap.org.
4. Products derived from this Software may not be called "OpenLDAP" nor may "OpenLDAP" appear in their
names without prior written permission of the OpenLDAP Foundation. OpenLDAP is a trademark of the
OpenLDAP Foundation.
5. Due credit should be given to the OpenLDAP Project (http://www.openldap.org/).
THIS SOFTWARE IS PROVIDED BY THE OPENLDAP FOUNDATION AND CONTRIBUTORS “AS IS” AND
ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE OPENLDAP FOUNDATION OR ITS CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.