Network User's Guide
Table Of Contents
- GUIDA DELL’UTENTE IN RETE
- Sommario
- 1 Introduzione
- Informazioni generali
- Funzionalità di rete
- Tipi di connessione di rete
- Protocolli
- Funzioni e protocolli TCP/IP
- DHCP/BOOTP/RARP
- APIPA
- Client DNS
- LPR/LPD
- Client SMTP (per il modello MFC-6490CW e MFC-6890CDW)
- Port9100
- mDNS
- TELNET
- SNMP
- Web Services
- Client FTP (per i modelli MFC-5890CN, MFC-5895CW, MFC-6490CW e MFC-6890CDW)
- LDAP (per MFC-6890CDW)
- IPv6 (Per i modelli MFC-5490CN, MFC-5890CN, MFC-5895CW, MFC-6490CW, DCP-6690CW e MFC-6890CDW)
- Altro protocollo
- Funzioni e protocolli TCP/IP
- 2 Configurazione della macchina per una rete Ethernet cablata
- Informazioni generali
- Indirizzi IP, subnet mask e gateway
- Elenco dettagliato delle operazioni da eseguire
- Configurazione dell'indirizzo IP e della subnet mask
- Modifica delle impostazioni del server di stampa
- Uso dell'utilità BRAdmin Light per modificare le impostazioni del server di stampa
- Uso dell'utilità BRAdmin Professional per modificare le impostazioni senza fili (per Windows®)
- Utilizzo del software Impostazione remota per modificare le impostazioni del server di stampa (non disponibile per i modelli DCP)
- Utilizzo del pannello di controllo per modificare le impostazioni del server di stampa
- 3 Configurazione della macchina per una rete senza fili (non disponibile per i modelli MFC-5490CN e MFC-5890CN)
- Informazioni generali
- Termini e concetti relativi alla rete senza fili
- Elenco dettagliato delle operazioni da eseguire per la configurazione della rete senza fili
- Controllare l'ambiente di rete
- Controllare il metodo di configurazione della rete senza fili
- Configurazione della macchina per la rete senza fili mediante la funzione di Impostazione guidata del pannello di controllo della macchina
- Configurazione mediante il menu SES/WPS/AOSS del pannello di controllo (solo modalità Infrastruttura)
- Configurazione mediante il Metodo PIN di Wi-Fi Protected Setup™ (solo modalità Infrastruttura)
- Configurazione della macchina per la rete senza fili mediante l'applicazione di installazione Brother disponibile su CD-ROM
- Configurazione della macchina in rete senza fili
- Utilizzo dell'Impostazione guidata dal pannello di controllo
- Utilizzo del menu SES/WPS/AOSS del pannello di controllo per configurare la macchina per una rete senza fili
- Utilizzo del Metodo PIN di Wi-Fi Protected Setup™
- Utilizzo del programma di installazione automatico Brother disponibile nel CD-ROM per configurare la macchina in una rete senza fili
- 4 Configurazione senza fili per Windows® mediante l'applicazione di installazione Brother (Non disponibile per i modelli MFC-5490CN e MFC-5890CN)
- 5 Configurazione senza fili per Macintosh mediante l'applicazione di installazione Brother (Non disponibile per i modelli MFC-5490CN e MFC-5890CN)
- 6 Impostazione del pannello di controllo
- Menu Rete
- TCP/IP
- Imp. varie (solo per il modello MFC-5490CN)
- Imp. guidata (solo per rete senza fili)
- SES/WPS/AOSS (solo per reti senza fili)
- WPS con codice PIN (solo per reti senza fili)
- Stato WLAN (solo per reti senza fili)
- Ethernet (solo per reti cablate)
- E-mail/I-FAX (Per il modello MFC-6490CW e MFC-6890CDW)
- Scansione a FTP (Per i modelli MFC-5890CN, MFC-5895CW e MFC-6490CW)
- Scansione a FTP (per MFC-6890CDW)
- Fuso orario (Per il modello MFC-5895CW, MFC-6490CW e MFC-6890CDW)
- Rete I/F (non disponibile per i modelli MFC-5490CN e MFC-5890CN)
- LDAP (per MFC-6890CDW)
- Ripristino delle impostazioni di rete sui valori predefiniti di fabbrica
- Stampa dell'elenco di configurazione della rete
- Menu Rete
- 7 Driver Deployment Wizard (solo per Windows®)
- 8 Stampa in rete da Windows® - Stampa Peer-to-Peer TCP/IP di base
- 9 Stampa in rete da Macintosh
- 10 Operazioni relative al protocollo LDAP (per MFC-6890CDW)
- 11 Internet fax e Scansione a E-mail (per il modello MFC-6490CW e MFC-6890CDW)
- Informazioni generali su Internet fax
- Connessione
- Funzioni dei tasti del pannello di controllo
- Invio di un documento Internet Fax
- Immissione manuale di testo
- Ricezione di documenti e-mail o Internet Fax
- Ricezione di un documento Internet Fax sul computer
- Inoltro di messaggi e-mail e fax ricevuti
- Relay Broadcast
- TX Verification Mail
- Setup mail TX
- Setup mail RX
- Error mail
- Informazioni importanti su Internet Fax
- Informazioni generali sulla funzione Scansione a E-mail Server (per il modello MFC-6490CW e MFC-6890CDW)
- Informazioni generali su Internet fax
- 12 Funzionalità di protezione (per il modello MFC-6490CW e MFC-6890CDW)
- 13 Risoluzione dei problemi
- Appendice A
- Appendice B
- Appendice C
- Indice
Appendice C
190
C
Original SSLeay License C
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved.
This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was
written so as to conform with Netscapes SSL.
This library is free for commercial and non-commercial use as long as the following conditions are aheared
to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc.,
code; not just the SSL code. The SSL documentation included with this distribution is covered by the same
copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this
package is used in a product, Eric Young should be given attribution as the author of the parts of the library
used. This can be in the form of a textual message at program startup or in documentation (online or textual)
provided with the package.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that
the following conditions are met:
1. Redistributions of source code must retain the copyright notice, this list of conditions and the following
disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the
following disclaimer in the documentation and/or other materials provided with the distribution.
3. All advertising materials mentioning features or use of this software must display the following
acknowledgement: "This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com)" The word 'cryptographic' can be left out if the rouines from the library being used are
not cryptographic related :-).
4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code)
you must include an acknowledgement: "This product includes software written by Tim Hudson
(tjh@cryptsoft.com)"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or derivative of this code cannot be
changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU
Public Licence.]