Operation Manual

Chapter 8
76
e Press a or b to choose the 2-digit
One Touch location where you want to
store the number in.
Press OK.
Note
One Touch Dial numbers begin with (for
example, l 0 2).
f Do one of the following:
 Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 194.)
 To store the number without a name,
press OK.
g Press OK to confirm the fax or
telephone number.
h Press a or b to choose Complete.
Press OK.
i Press Stop/Exit.
Storing Speed Dial numbers 8
You can store up to 80 (MFC-5890CN and
MFC-5895CW) or 100 (MFC-6490CW)
2-digit Speed Dial locations with a name, and
each name can have two numbers. When
you dial you will only have to press a few keys
(For example: (Phone Book), the two-
digit number, and Mono Start or
Colour Start).
a Press (Phone Book).
b Press a or b to choose Set Speed Dial .
Press OK.
c Press a or b to choose the Speed Dial
location where you want to store the
number in.
Press OK.
d Do one of the following:
 Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text on page 194.)
 To store the number without a name,
press OK.
e Enter the fax or telephone number (up to
20 digits).
Press OK.
Note
(MFC-6490CW only)
If you want to store an E-mail address to
use with Internet fax or Scan to E-mail
server, press a to choose Dial Type,
and then press d or c to change the option
to E-Address. Press b to choose
FAX/TEL/MAIL, and then enter the
E-mail address and press OK. (See
Entering Text on page 194.)
f Do one of the following:
 Enter the second fax or telephone
number (up to 20 digits).
Press OK.
 If you do not want to store a second
number, press OK.
g Press a or b to choose Complete.
Press OK.
h Do one of the following:
 To store another Speed Dial
number, go to step c.
 To finish the setting, press
Stop/Exit.