User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- Windows®
- 1 Printing
- 2 Scanning
- Scanning a document using the TWAIN driver
- Scanning a document using the WIA driver (For Windows® XP/Windows Vista®)
- Scanning a document using the WIA driver (For Windows Photo Gallery and Windows Fax and Scan users)
- Using the Scan key (For USB cable users)
- Using ScanSoft™ PaperPort™ 11SE with OCR by NUANCE™
- 3 ControlCenter3
- 4 Network Scanning (For models with built-in network support )
- 5 Remote Setup (Not available for DCP models, MFC-250C and MFC-290C)
- 6 Brother PC-FAX Software (MFC models only)
- 7 PhotoCapture Center®
- 8 Firewall settings (For Network users)
- Apple® Macintosh®
- 9 Printing and Faxing
- 10 Scanning
- 11 ControlCenter2
- 12 Network Scanning (For models with built-in network support )
- 13 Remote Setup & PhotoCapture Center®
- Index
- brother USA
Network Scanning (For models with built-in network support)
122
4
Scan to FTP Manual Method 4
a Load your document.
b Press the (Scan) key.
c Press Scan to FTP.
d Press a or b to choose <Manual>.
Note
If there is no FTP Profile configured, skip d and go to e.
e Press to choose Name for the FTP host address or I P Address for the FTP IP address.
f Enter the FTP host address (for example ftp.example.com up to 60 characters) or the IP address (for
example 192.23.56.189).
Press OK.
g Enter the destination folder (for example /brother/abc/, up to 60 characters).
Press OK.
h Enter the username.
Press OK.
i Enter the password.
Press OK.
j Press d or c to choose Quality.
Press to choose Color 150 dpi, Color 300 dpi, Color 600 dpi, B/W 200x100 dpi or
B/W 200 dpi.
k Press d or c to choose File Type.
Press to choose PDF or JPEG for color or gray scale documents and PDF or TIFF for B/W documents.
Note
If you are using the scanner glass of the machine, choose the document size.
•Press d or c to choose Glass Sc an Size.
• Choose the document size you want.
l Do one of the following:
If you want to start scanning, press Black Start or Color Start and go to m.
If you want to change the file name, go to n.
m Press d or c to choose File Name.
Press a or b to choose a file name you want to use. Press Black Start or Color Start and go to o.
Note
If you want to change the file name manually, go to n.