User guide

10
h Enter the time in 24-hour format on the
Touchscreen, and then press OK.
(e.g. Enter 1 5, 2 5 for 3:25 P.M.)
i Press Stop/Exit.
10
Set your station ID
You should store your name and fax number to be
printed on all fax pages that you send.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press Station ID.
e Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
f Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
To enter numbers or special letters, press
repeatedly until the character you want to enter
appears, then press the character you want to
use.
g Press Stop/Exit.
To confirm the current date and time, print
out the User Settings report. (See Printing
Reports in Chapter 9 of the User's Guide.)
Time:15:25
Time : 15:25
Date&Time
Dat e &Time
Note
• If you need to enter a character that is on the
same button as the last character, press c to
move the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press d or c to move the cursor to the
incorrect character, press .
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
For details, see Entering Text in Appendix C
of the User's Guide.
Note
(USA only)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless
such messages clearly contain, in a margin at the
top or bottom of each transmitted page, or on the
first page of the transmission, the date and time it
is sent and an identification of the business or
other entity or other individual sending the
message and the telephone number of the
sending machines or such business, other entity
or individual.