User guide

Macintosh

Wired Network

Windows

Macintosh

Wired Network

c Carefully route the network cable through the

trench and out the back of the machine. Then,

connect the cable to your network.

d Gently close the scanner cover using the finger

holds on both sides of it.

WARNING

Be careful not to trap your fingers under the

scanner cover.

Always use the finger holds provided on both

sides of the scanner cover when opening and

closing it.

Install MFL-Pro Suite

a Put the supplied CD-ROM into your CD-ROM

drive.

b Double-click the Start Here OSX icon to install.

c Choose Wired Network Connection, and

then click Next. Follow the on-screen

instructions.

d The Brother software will search for the Brother

device. During this time the following screen

will appear.

Important

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

Note

If both USB and LAN cables are being used,

guide both cables through the trench with one on

top of the other.

Note

Please wait, it will take a few seconds for the

software to install. After the installation, click

Restart to finish installing the software.