User Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- Windows®
- 1 Printing
- 2 Scanning
- Scanning a document using the TWAIN driver
- Scanning a document using the WIA driver (For Windows® XP/Windows Vista®)
- Scanning a document using the WIA driver (For Windows Photo Gallery and Windows Fax and Scan users)
- Using the Scan key (For USB cable users)
- Using ScanSoft™ PaperPort™ 11SE with OCR by NUANCE™
- 3 ControlCenter3
- 4 Network Scanning (For models with built-in network support)
- 5 Remote Setup (Not available for DCP models, MFC-250C, MFC-290C and MFC-297C)
- 6 Brother PC-FAX Software (MFC models only)
- 7 PhotoCapture Center™
- 8 Firewall settings (For Network users)
- Apple® Macintosh®
- 9 Printing and Faxing
- 10 Scanning
- 11 ControlCenter2
- 12 Network Scanning (For models with built-in network support)
- 13 Remote Setup & PhotoCapture Center™
- Index
- brother UK
Scanning
62
2
For Colour LCD models 2
Setting the new default 2
a Press the (Scan) key.
b Press a or b to choose Scan to Media.
Press OK.
c Press and choose your new setting. Repeat this step for each setting you want to change.
d After changing the last setting, press a or b to choose Set New Default.
Press OK.
e Press 1 or to choose Yes.
f Press Stop/Exit.
Factory reset
2
a Press the (Scan) key.
b Press a or b to choose Scan to Media.
Press OK.
c Press a or b to choose Factory Reset.
Press OK.
d Press 1 or to choose Yes.
e Press Stop/Exit.