User Manual

9
9
Set the date and time
The machine displays the date and time, and if you
set up the station ID, the date and time displayed on
your machine will be printed on every fax you send.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press Date&Time.
e Enter the last two digits of the year on the
Touchscreen, and then press OK.
(e.g. Enter 0 9 for 2009.)
f Repeat for Month and Day, and Hours and
Minutes in 24-hour format.
g Press Stop/Exit.
10
Enter personal
information (station ID)
You should store your name and fax number to be
printed on all fax pages that you send.
a Press MENU.
b Press a or b to display Initial Setup.
c Press Initial Setup.
d Press Station ID.
e Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK. For example,
to enter the Australia dialling code “+61”,
press until + appears then enter +.
Press until numbers appear then press 6,
1 and the rest of your number.
f Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
g Press Stop/Exit.
Year:2009
Ye a r : 2 0 0 9
Date&Time
D a t e & Ti m e
Note
• To enter numbers or special letters, press
repeatedly until the character you want to enter
appears in the character set.
• If you need to enter a character that is on the
same button as the last character, press c to
move the cursor to the right.
• If you entered a letter incorrectly and want to
change it, press d or c to move the cursor to the
incorrect character, press .
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
For details, see Entering Text in Appendix C
of the User's Guide.